Latest activity
-
cwt replied to the thread DSLicSrv anyone move this to Proxmox Successfully? Specifically from Nutanix.If you have the possibility to set up a test VM, try the following: Windows Server 2022/2025 VM Machine: q35 BIOS: OVMF (UEFI) TPM State: v2.0 CPU: host static VM UUID static MAC-address Then install DSLS and check DS License Administration... -
FHello everyone I should make a laboratory cluster and therefore having a limited budget I would like to buy Dell Optiplex 7070 SFF Desktop Computer PC i7-9700 16gb ram(Renewed) Do you think it's fine as 100% compatibility with propxmox ...
-
ACongrats on the new release! Great to see new security functionality! Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
AAphex reacted to kavejo's post in the thread How to download LXC version of OpenWRT and run it on Proxmox with
Like.
Hi, I am looking to run an OpenWRT container to provide network access to my VMs. I have seen on https://us.images.linuxcontainers.org/ that there is a template built for OpenWRT 19.07. When I run pveam available, the containers at the URL... -
AAphex reacted to t.lamprecht's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with Like.
We are excited to announce the first release of Proxmox Virtual Environment with official support for a second CPU architecture: 64-bit ARM (arm64/aarch64). Until now, Proxmox VE was available for x86-64 (amd64) only. Proxmox VE 9.2 for arm64...
-
IIsThisThingOn replied to the thread PBS ZFS disk speed thoughts option.First of all, what are we talking about? What do you mean by "migrating"? Is it the backup from PVE to PBS speed you are unhappy with?
-
Rrandyqx posted the thread falling over to a zfs replica in Proxmox VE: Installation and configuration.maybe i do not understand how to fall a VM from one node to another VM foo was running on vm1 i replicate it to vm0 and let it stabilize i fail it over vm1.sea.rg.net:/etc/pve/nodes/vm1/qemu-server# mv 104.conf ../../vm0/qemu-server/ it is fine...
-
Nnrgbistro reacted to dondizzurp's post in the thread [GUIDE] Install Home Assistant OS in a VM with Like.
So just like my other guide, this is more for my own records so I can come back and refer to it. I know there are scripts for these things, but I prefer doing them manually so I can learn along the way. Maybe it can help someone else in the...
-
SInisterPisces posted the thread [SOLVED] [PDM 1.1.7] Change Remote Name without Deleting Remote: Is This the Correct Procedure? in Datacenter Manager: Installation and configuration.I gave one of my remotes a name I now regret and would like to change. From reviewing the docs and poking around the web GUI, unless I missed something, I can't really see an easy way to do it without editing the config files--sort of like how... -
BBoss replied to the thread Clone of Template fails.Many thanks for pointing me in the right direction - I removed the orphaned disks with the dmsetup command. And can now clone from a template using that VMID 103. FYI - I removed the VM via the PVE web interface and ticked the boxes for "Purge...
-
Aalexskysilk reacted to bbgeek17's post in the thread Quick HOWTO on setting up iSCSI Multipath with Like.
Microsoft is still catching up with NVMe/TCP, and we've encountered PSODs on ESXi in the past related to NVMe/TCP connections. iSCSI is extremely mature and broadly supported. As mentioned, it may make sense in more scenarios than initially...
-
SInisterPisces posted the thread [PDM 1.1.7] Questions re: Multiple Endpoints for the Same Node (Single-Node Remote) in Datacenter Manager: Installation and configuration.Hello, Using ACME with the Cloudflare DNS plugin, I've configured a PVE node with a Let's Encrypt certificate for pve-host.mydomain.com. So, adding that PVE node as a single-node remote to PDM was really easy; I didn't have to worry about...
-
-
Ccapm replied to the thread [SOLVED] NetBox IPAM does not request IP.Hey! I figured it out. I had not selected 'allocate DHCP' in the Zone config.
-
JJ-Rod replied to the thread PBS ZFS disk speed thoughts option.Personally, I would suggest scenario 3, assuming your RAID controller has a battery-backed cache and you set the controller to write-back (not the disks). That will probably be the fastest setup of the three scenarios listed, although perhaps...
-
Sshodan replied to the thread Can a Proxmox VM Feel Like Bare Metal? Dual 144Hz + GPU Passthrough + Low Latency.But he's not going to use proxmox as the desktop, in this case, proxmox is doing what it is designed to do, host high performance VMs. He's not going to install a display server in proxmox, the host won't handle the GPU, nor keyboard/mouse/sound...
-
Wwendellrodriguez replied to the thread Issues with using “balance-slb” in OVS Bond.I have the same issue ...
-
JJohannes S replied to the thread Can a Proxmox VM Feel Like Bare Metal? Dual 144Hz + GPU Passthrough + Low Latency.Nobody claimed that it won't work. UdoB even mentioned the relevant page from the Proxmox wiki. The point being is, that ProxmoxVE isn't designed as a desktop OS so it's more work to make it behave like one. Now there are some usecases for it...
-
IInfraGuy reacted to aaron's post in the thread Ceph RBD Storage zeigt 'rbd error: listing images failed: (2) No such file or directory (500)' – trotz funktionierendem Ceph und korrektem Keyring with Like.
Hey, was gibt ein rbd ls -l ceph-pool01 zurück? Kommen da am Anfang Fehler bezüglich eines RBD Images das nicht gefunden wird? Zum Beispiel: rbd: error opening vm-100-disk-0: (2) No such file or directory rbd: listing images failed: (2) No such...
-
JJohannes S replied to the thread PBS on RAIDZ2+HDD, no special file.If I recall correctly it's entirely possible to use ZFS with HW-RAID if (and only if!) you don't build a pool but instead uses the virtual disc provided by the RAID-Controller in a single-device-pool. @Falk R. mentioned such a setup in the...
-
JJ-Rod replied to the thread PBS on RAIDZ2+HDD, no special file.If your hardware RAID controller has a battery-backed RAM cache, you might have bearable performance with write-back enabled. Have you already tried some PBS tasks and are needing to improve performance? Or is this still in the building phase...
