Der controller kann RAID5, setzt dazu auch die erforderlichen Platten voraus. Die jungs bei Wortmann kenne ich nur als verlässlich und kompetend.
Beim einsatz des raid controllers mit Raid leveln, würde ich auf ZFS verzichten.
bei der BTO...
@Johannes S die 256 stehen in #12, 4x64GB DDR5.
@oelk "eintragen" heißt: der Pool existiert nach dem zpool create erstmal nur auf OS-Ebene, PVE kennt ihn noch nicht. Im Webinterface unter Datacenter > Storage > Add > ZFS den Pool auswählen, als...
Companion to this, but from the opposite direction, I suppose: https://forum.proxmox.com/threads/pdm-1-1-x-new-to-pdm-how-to-add-remote-set-up-user-permissions.185914/
Now that I'm comfortable adding remotes to my first PDM instance, I decided...
@Johannes S die 256 stehen in #12, 4x64GB DDR5.
@oelk "eintragen" heißt: der Pool existiert nach dem zpool create erstmal nur auf OS-Ebene, PVE kennt ihn noch nicht. Im Webinterface unter Datacenter > Storage > Add > ZFS den Pool auswählen, als...
Bleibt nur noch die Frage, wie wir im Fehlerfall über einen Datenträgerausfall informiert werden.
Da die 4 TB-SSDs nicht an einem RAID-Controller hängen, piepst aus der Richtung schon mal nichts.
Hoffen wir mal, das das Supermicro-Board über IPMI...
Wenn man beim Installieren ZFS für das Betriebssystem auswählt nicht mehr, dann wird seit ProxmoxVE 8.1 durch den Installer der Wet auf 10% des verbauten Speichers, aber maximal 16 GB gesetzt...
PVE 9 ships ZFS 2.4 (since january 2026) - and with the update from ZFS 2.3 -> 2.4 the library-packages got a soname bump (libzpool6 -> libzpool7, libzfs6 -> libzfs7).
As both versions of the library can co-exist on a system (in case any old...
Bei den SATA SSDs kann man tatsächlich noch etwas mit dem 9560er raus holen.
Ein 9550 gibts nicht: https://docs.broadcom.com/doc/MegaRAID-9500-Tri-Mode-Storage-Adapters
Wenn nur 2 Disks angeschlossen sind kann man immer nur Raid1 auswählen und...
PVE 9 ships ZFS 2.4 (since january 2026) - and with the update from ZFS 2.3 -> 2.4 the library-packages got a soname bump (libzpool6 -> libzpool7, libzfs6 -> libzfs7).
As both versions of the library can co-exist on a system (in case any old...
Das ist ja was ganz anderes als am Anfang gedacht, ihr habt gar keine HDDs sondern 4x PM893, also Enterprise-SATA mit PLP. Damit ist die Special-Device-Diskussion erledigt, auf einem reinen SSD-Pool brauchst du das nicht. Und was den Controller...
There is now a newer pve-manager with version 9.2.12 available on the pve-test repo and a backport of that as 8.4.22 for PVE 8's pvetest repo, matching our respective test repo of the ceph-squid and ceph-tentacle releases.
There is some better...
It has been ready for years. A high-friction CLI/UX workflow is not the same thing as a system being "unusable" or "not production-grade." Thousands of enterprise nodes run multipath iSCSI in production every day—it just requires Linux systems...
Bei den SATA SSDs kann man tatsächlich noch etwas mit dem 9560er raus holen.
Ein 9550 gibts nicht: https://docs.broadcom.com/doc/MegaRAID-9500-Tri-Mode-Storage-Adapters
Wenn nur 2 Disks angeschlossen sind kann man immer nur Raid1 auswählen und...
There's an enhancement request for including PDM in POM, see:
https://bugzilla.proxmox.com/show_bug.cgi?id=7762
Latest update is patch for it available, waiting for review...
When will iSCSI be ready for use in PVE? Are there any plans for iSCSI and networking development in PVE?
I see that PVE already has a 9.x release, and ISCSI is the biggest pain to describe it gently. I am the only person in the company who...
The guest-fsfreeze-status command is used to determine if a fsfreeze is still ongoing inside the guest VM. The timeout here show that the guest does not respond to the status requests send by the PVE host, which waits 10 minutes at most for this...
As Impact said, if you have an issue, that really completely stalls a Quad-Core CoffeeLake CPU, then this (Intel Ethernet issue originally discussed here) is most likely not the issue, that you are experiencing. Just because you have one of the...
Das ist ja was ganz anderes als am Anfang gedacht, ihr habt gar keine HDDs sondern 4x PM893, also Enterprise-SATA mit PLP. Damit ist die Special-Device-Diskussion erledigt, auf einem reinen SSD-Pool brauchst du das nicht. Und was den Controller...