Latest activity
-
mariol reacted to ModulesGarden's post in the thread 15 years of developing software around Proxmox VE with
Like.
Hello everyone, We have been working with Proxmox for 15 years, designing, developing, and maintaining software for hosting providers that use the platform. Proxmox VE has always been the main focus of this work. Over time, we have developed... -
BBu66as replied to the thread Wasserdichtes System für kleine Multi Teant Anwendung.Was genau hat euch die 2h gekostet, kaputte Relay-Logs auf der Replica oder kam der Primary mit Transaktionen zurück, die drüben nie angekommen sind? Zweiteres ist der Klassiker beim harten Kill. Schau auf dem Primary mal sync_binlog an, das...
-
Xxybo reacted to jAston's post in the thread [SOLVED] Wrong default bootloader entry: "Reboot into firmware interface" with Like.
Fixed mount /dev/sda2 /mnt/esp bootctl --esp-path=/mnt/esp set-default proxmox-6.8.12-39-pve.conf
-
MMarroniJohny replied to the thread Wasserdichtes System für kleine Multi Teant Anwendung.Ja danke, @Bu66as : gestern hatten wir nur mal die Replikation eingerichtet, und getestet wurde mit einem sauberen shutdown. Hatte dann Claude deinen ganzen letzen Post verabreicht. Wir hatten dann Last auf der DB simuliert, und die Haupt DB VM...
-
Hhallo, das lustige das PBS auf PBS zu syncen bedeutet noch immer, dass du ein entsprechendes PVE am Zielstandort haben musst :) Ich löse das gerade mit einem Script, was mir vom PBS eine Sicherung auf einen PVE wirft und sofort startfähig ist
-
JjAston replied to the thread [SOLVED] Wrong default bootloader entry: "Reboot into firmware interface".Fixed mount /dev/sda2 /mnt/esp bootctl --esp-path=/mnt/esp set-default proxmox-6.8.12-39-pve.conf
-
BBu66as replied to the thread Selfhost API DNS Error.Die legt PMG selbst an, sobald du ein DNS-Plugin anlegst. Wenn sie fehlt, gibt's schlicht kein Plugin, und deshalb bricht der setup-Aufruf mit exit 1 ab. Anlegen am einfachsten im Webinterface unter Konfiguration → Zertifikate → ACME, bei den...
-
Ppvpaulo replied to the thread Intel E810 / ICE / IRDMA HMC Error causing Corosync link loss and node reboots – Proxmox VE 7.3.Obrigado pela resposta. vou testar
-
Ffoxpalace replied to the thread PBS meets Hetzner Storagebox.hallo, das lustige das PBS auf PBS zu syncen bedeutet noch immer, dass du ein entsprechendes PVE am Zielstandort haben musst :) Ich löse das gerade mit einem Script, was mir vom PBS eine Sicherung auf einen PVE wirft und sofort startfähig ist
-
JJohannes S reacted to DeQuzzie's post in the thread ZFS dedup on a Proxmox host in 2026 — has fast dedup changed the recommendation? with Like.
Results, as promised. Hardware and data: PVE 9.1.18, kernel 7.0.2-5-pve, zfs-2.4.2-pve1. The pool is a two-way mirror of 7200 rpm drives (Exos ST12000NM0127 + SkyHawk ST8000VX004), 7.27T size / 6.29T allocated, 86% capacity, 3% fragmentation, no...
-
JJohannes S reacted to daanw's post in the thread ZFS dedup on a Proxmox host in 2026 — has fast dedup changed the recommendation? with Like.
If it is "worth it" depends on a lot of things. My use case was archiving as much as possible data on single server with all disk slots used. A 1.3 dedup ratio is not much, but on archiving for example 100TB of data it results in quite a bit of...
-
JJohannes S reacted to proxuser77's post in the thread Proxmox Cluster und mDNS von Brother Netzwerkdruckern with Like.
Ich sehe drei Möglichkeiten: 1. VLAN-fähiger Switch und Router, 2. separate physische NICs in den PVEs und dann via separatem Dumb Switch miteinander verdrahten und darüber Corosync laufen lassen. 3. Nicht vom Handy aus drucken. Wenn 1 oder 2...
-
JI'm not aware of an official PVE specific source but if you care, here's some of my opinions about it. This heavilly depends on the storage type. My experience is with ZFS and LVM-Thin, which are also what I recommend, in that order I haven't...
-
TTFrenz replied to the thread Selfhost API DNS Error.Hallo, die Datei /etc/pmg/acme/plugins.cfg ist nicht vorhanden. Was muss da drin stehen?
-
Wwaltar reacted to DeQuzzie's post in the thread ZFS dedup on a Proxmox host in 2026 — has fast dedup changed the recommendation? with Like.
Results, as promised. Hardware and data: PVE 9.1.18, kernel 7.0.2-5-pve, zfs-2.4.2-pve1. The pool is a two-way mirror of 7200 rpm drives (Exos ST12000NM0127 + SkyHawk ST8000VX004), 7.27T size / 6.29T allocated, 86% capacity, 3% fragmentation, no...
-
Ppenetal replied to the thread [SOLVED] Yet another "ifreload -a" failed with exit code 1.This is such a dump problem and thing to do. Only thing dumber is me doing the same thing (data disk dying, replacing with old spare without wiping disk first), and then not understanding why it just wont work! Searching the web and now feeling...
-
CCPO_Siemens replied to the thread Snapshot best practices.We are using Ceph so our mileage may vary... Thanks a lot nonetheless.
-
CI'm not aware of an official PVE specific source but if you care, here's some of my opinions about it. This heavilly depends on the storage type. My experience is with ZFS and LVM-Thin, which are also what I recommend, in that order I haven't...
-
Ccatubba posted the thread [Tool] Joulenap: keep the PBS powered off, wake it for the backups, shut it down after (open source) in Proxmox VE: Installation and configuration.Hi all, Disclosure first: I am the author of the tool below, and it is open source. I run PBS on a dedicated box at home. It does its job in twenty minutes a night and sits idle the rest of the day, so I wanted it powered off between backups...
-
-
EEl_Rapha replied to the thread Potential Greylisting issue.From your experience, have other French people ever complained about the greylisting and laposte.net?
