Latest activity
-
6Interessant - da denkt man doch an die alte WDR Sendung "Hobbythek"....
-
NNounours replied to the thread Eject RDX after synch Job.Hi JensF, In fact, the advantage of having a job-level script is that—even without an automatic RDX loader—you can automatically eject the RDX cartridge to ensure a true offline backup after job finished.
-
OHi, once again, thank you for your help, it's appreciate. 1) Ok 2) Ok 3) No, definitely no. I took time to re-read the documentation and explore my logs. I understand that: laposte.net never retry to send email! The second attempt is another...
-
BBu66as reacted to MarroniJohny's post in the thread Wasserdichtes System für kleine Multi Teant Anwendung with
Like.
Ja, habe atm eine fixe IP mit 10 Gbit. Jetzt bin ich leider noch auf doppelt NAT und Providerbox angewiesen. Will aber den Provider wechseln. Dann gibt es entweder wieder eine fixe, oder gleich ein /29er Subnet. Und nein, ich habe keine Fritte... -
LI'm not aware of an official PVE specific source but if you care, here's some of my opinions about it. This heavilly depends on the storage type. My experience is with ZFS and LVM-Thin, which are also what I recommend, in that order I haven't...
-
OOnslow reacted to DeQuzzie's post in the thread ZFS dedup on a Proxmox host in 2026 — has fast dedup changed the recommendation? with Like.
Results, as promised. Hardware and data: PVE 9.1.18, kernel 7.0.2-5-pve, zfs-2.4.2-pve1. The pool is a two-way mirror of 7200 rpm drives (Exos ST12000NM0127 + SkyHawk ST8000VX004), 7.27T size / 6.29T allocated, 86% capacity, 3% fragmentation, no...
-
IITT posted the thread [SOLVED] Nach Upgrade auf 9.2.10 iSCSI funktioniert nicht mehr in Proxmox VE (Deutsch/German).Hallo an alle, gab es bei dem Update irgendwelche Änderungen? Die vorherige Version 9.1.9 funktionierte noch. Ich habe für Backupzwecke eine Synology 1219+ NAS seit Jahren an einem PVE Cluster via iSCSI und LVM angebunden. Dies funktionierte...
-
AlexHK reacted to j.theisen's post in the thread Powering down a Proxmox 9.2 cluster: how-to needed with Like.
Hi @engineer5 thank you for posting on the forum! So with the new HA disarm feature you can also chose to ignore the state of the VMs instead of freezing everything. This will still let you properly power down all the VMs. After the... -
OOnslow reacted to leesteken's post in the thread Host bootloader documentation nitpick (and about BTRFS) with Like.
The Administration Guide claims: However, after installing Proxmox VE (9.2 in a VM) on BTRFS, I noticed and confirmed that it also uses systemd-boot when using EFI without secure boot. Maybe someone can please correct this? Are there any...
-
Da muss noch ein "+EXEC" für "ONLINE", "ONBATT" und "LOWBATT" sein, damit der dir ein Script ausführt, wenn die USB auf Akku geht, wieder ans Netz kommt oder der Akku gegen Ende geht. Dann halt das Script erstellen, was dann regelt, wann was...
-
Uudo replied to the thread [SOLVED] Question about cpu-models and cpu flags.Hello Arthur, of course… lahf-am is there: qemu-system-x86_64 -cpu help Available CPUs: 486 (alias configured by machine type) 486-v1 Broadwell (alias configured by machine type)...
-
Eepv5jubs replied to the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)!.Thank you so much bud, I will try asap
-
Eepv5jubs reacted to r0bb10's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with Like.
fairly simple, just boot armbian, add the official proxmox repo wget https://enterprise.proxmox.com/debian/proxmox-release-trixie.gpg \ -O /usr/share/keyrings/proxmox-archive-keyring.gpg cat >/etc/apt/sources.list.d/proxmox.sources <<'EOF'...
-
IIsThisThingOn reacted to MarroniJohny's post in the thread Wasserdichtes System für kleine Multi Teant Anwendung with Like.
Ja, habe atm eine fixe IP mit 10 Gbit. Jetzt bin ich leider noch auf doppelt NAT und Providerbox angewiesen. Will aber den Provider wechseln. Dann gibt es entweder wieder eine fixe, oder gleich ein /29er Subnet. Und nein, ich habe keine Fritte...
-
IIsThisThingOn reacted to DeQuzzie's post in the thread ZFS dedup on a Proxmox host in 2026 — has fast dedup changed the recommendation? with Like.
Results, as promised. Hardware and data: PVE 9.1.18, kernel 7.0.2-5-pve, zfs-2.4.2-pve1. The pool is a two-way mirror of 7200 rpm drives (Exos ST12000NM0127 + SkyHawk ST8000VX004), 7.27T size / 6.29T allocated, 86% capacity, 3% fragmentation, no...
-
IIsThisThingOn reacted to daanw's post in the thread ZFS dedup on a Proxmox host in 2026 — has fast dedup changed the recommendation? with Like.
If it is "worth it" depends on a lot of things. My use case was archiving as much as possible data on single server with all disk slots used. A 1.3 dedup ratio is not much, but on archiving for example 100TB of data it results in quite a bit of...
-
MMarroniJohny reacted to Bu66as's post in the thread Wasserdichtes System für kleine Multi Teant Anwendung with Like.
Bei Semi-Sync pass auf den Timeout auf. rpl_semi_sync_master_timeout steht per Default auf 10 Sekunden, und wenn die Replica nicht rechtzeitig quittiert, schaltet der Primary still auf async zurück und läuft weiter. Kein Fehler, nichts was...
-
MMarroniJohny replied to the thread Wasserdichtes System für kleine Multi Teant Anwendung.Ja, habe atm eine fixe IP mit 10 Gbit. Jetzt bin ich leider noch auf doppelt NAT und Providerbox angewiesen. Will aber den Provider wechseln. Dann gibt es entweder wieder eine fixe, oder gleich ein /29er Subnet. Und nein, ich habe keine Fritte...
-
BBrandon Lee hat zwei Varianten ausprobiert: https://www.virtualizationhowto.com/2026/08/install-proxmox-arm64-on-a-raspberry-pi-5-this-weekend/...
-
Sswgwolfila replied to the thread Conntrack not working when VM has HA turned on.Hi, this is not only by migrations via HA - but also by bulk migrations... same effect. Only with 1:1 Migration - Select vm via gui und use Option "Conntrack State" then works Migration WITH Conntrack. Please correct Bulk-Migration Gui option...
-
