Latest activity
-
JJohannes S replied to the thread Empfehlung / Erfahrung Proxmox auf Notebook.Kommt drauf an, was man unter "gehen" versteht. Die Anforderung kommt daher, dass corosync empfindlich auf Latenzen regiert. Ist die einzige Netzwerkleitung also mit Migrations-, Replikations- oder sonstigen Datenverkehr ausgelastet gerät...
-
Uuzumo replied to the thread HPE MR416i-o & HPE MR408i-o Gen11/10.Unless Broadcom provides the drivers, I don't think we'll be able to get a kernel with the drivers built in... https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/log/drivers/scsi/megaraid/megaraid_sas_fusion.c?h=linux-7.0.y...
-
Lluckman212 replied to the thread Problem with VirtIO in Windows Server 2012 r2 installation.As of 2026-08-14 what is the suggested version of virtio-win drivers to use for 2012R2 VMs on PVE 9? I am using 0.1.221 and it seems to work fine. But worried about the comment above about buggy scsi driver... is 0.1.189 a better choice?
-
WZwei Disks, nur eben beide auf demselben Storage. @TErxleben meinte nicht 'alles in eine Platte', sondern dass die VM nicht gleichzeitig an NVMe und SATA hängen soll, sonst reißt dir jeder der beiden Datenträger die komplette VM mit. Innerhalb...
-
JohnnieKF replied to the thread bad backup status for VM.Can you check: grep lock /etc/pve/qemu-server/100.conf And also: ps aux | grep -E 'vzdump|qemu.*-id 100' | grep -v grep -
66equj5 replied to the thread Probleme bei installation von Openmediavault.Ich warte erst mal ab, bis die Hersteller alles in genügender Qualität hinbekommen. Das allein dauert wohl noch ein paar Äonen. :p Erinnert mich an Bluetooth. Das ist ja erst gut 25 Jahre auf dem Markt und mittlerweile geht's ganz ok. :D
-
THello. One of my VMs has pemanent "active backup" status. Command "info backup" from 'monitor' tab shows # info backupBackup status: error - vma_queue_write: write error - Broken pipe Start time: Wed Aug 12 22:30:06 2026 End time: Wed Aug 12...
-
JohnnieKF reacted to Chris's post in the thread PBS with WORM/Immutable Storage for Backup Chunks with
Like.
Hi, this is currently not possible, see https://bugzilla.proxmox.com/show_bug.cgi?id=4293 Since I'm currently working on a immutable sync with retention periods, so might take a closer look at this as well, but no promises or ETAs ;) -
JohnnieKF replied to the thread [SOLVED] I installed a script proxmox VE and it broke my networking.You may want to double check this as 'enth0' is likely a typo for 'eth0' Can you also please run this from the Proxmox console (it's running four seperate commands) and post the output? ip a; ip r; cat /etc/resolv.conf; ping -c3 1.1.1.1 It's...
-
Rrcp_ posted the thread Proxmox Backup Server 4 | S3 | Cold Storage | Glacier in Proxmox Backup: Installation and configuration.Hi to all. Does Proxmox Backup Server support S3 Cold Storage (Scaleway Glacier)? I already tried to use Scaleway S3, but it's using Stander Tier, and the cost is too high. Best regards.
-
SSupaman replied to the thread PBS with WORM/Immutable Storage for Backup Chunks.Not immutable, but you can: - protect each backup - do not run gc / prune Furthermore: you can create a user account fpr pve usage, which has the rights "backup". this user can only write (delvier), protect and restore backups, but not delete.
-
Ffertig replied to the thread ha Bug in 9.2.10?.ok, da der node reboot den maintenance mode triggert funktioniert das (gerade getestet). VMs werden verschoben. Aber so ist das wirklich nicht intuitiv. Für mich war strict=1 immer ein "ich verbiete es Dir aber trotzdem", während strict=0 eben...
-
UdoB reacted to Johannes S's post in the thread Windows Server 2025 extremely slow on PVE 9.2 while Server 2022 is fully responsive on the same host with Like.
Better disable "nested-virt" with host, this should give more performance. If one wants to use a generic type this tool is handy for determining it: https://github.com/credativ/ProxCLMC -
IIsThisThingOn replied to the thread kernel 7.0 performance issue with zfs pools.Strange. What was it before? And how is that connected to kernel 7?
-
Das ist die Prioritäts-Semantik aus den alten HA-Gruppen, die bei den Node-Affinity-Rules 1:1 übernommen wurde. strict 0 heißt nur, dass Nodes außerhalb der Rule im Notfall noch erlaubt sind. Die Zahlen innerhalb der Rule bilden trotzdem Stufen...
-
Yes its actually prerequisites for the upgrade to PVE9: https://pve.proxmox.com/wiki/Upgrade_from_8_to_9#Prerequisites Also, in general regarding the upgrade, ensure to double check the known issue in the wiki: Roadmap Proxmox VE 8.4 known...
-
UdoB reacted to leesteken's post in the thread New PVE 9 node shows "unknown"/offline in GUI from PVE 7/8 nodes, despite cluster status/quorum being OK with Like.
The combination of 7.x with 9.x is untested and explicitly unsupported. Are the PVE 8 nodes updated to the latest 8.4.y? Otherwise it is untested and could be unsupported. PVE 8.x is (about to be) unsupported completely. I'm afraid your cluster...
-
NFS is quite an insecure protocol ( unless you use kerberos auth which is a hassle to setup): https://media.ccc.de/v/2024-343-network-file-system-security Nonetheless it does the job, just run it on it's own dedicated network which can only be...
-
Andere Möglichkeit wäre den proxmox-offline-mirror zu nehmen, dann muss man nur dessen IP für die Proxmox-Knoten freischalten. Der Mirror kann und wird sich allerdings weiterhin auf alle IPs des CDNs verbinden, da wäre es angebracht den...
-
Die Fastly-Adressen sind deb.debian.org und security.debian.org, hinter den Cloudflare-IPs steckt download.proxmox.com (also das no-subscription-Repo und die ISO/Debian-Pakete von Proxmox). Die österreichische IP ist Proxmox direkt, da liegen...