Sollte normalerweise keine Auswirkung darauf haben wie Windows das TPM erkennt. Wäre ja fatal, wenn die Netzwerkkarte das TPM blockt. Aber Testen schadet ja grundsätzlich nicht.
Windows Server 2025 läuft auch ohne TPM, wenn man es nach der...
Sorry then I'm not understanding where the `5.1` comes from? If the ui only shows q35 then I'm guessing that running `qm config` also only shows `machine: q35`, (or actually nothing, if I have understood correctly)?
Spannend ist für mich vor allem, dass eine komplett neue VM mit frischem TPM-State plus der alten Systemdisk trotzdem failt, eine Neuinstallation mit demselben ISO aber sauber läuft. Das Problem liegt also in der Windows-Installation, nicht in...
Machine type there is just "q35", without a specific version - so it should use latest which would be 11.0, also:
meta: creation-qemu=11.0.0,ctime=1784036198
That's what I meant in my first message.
Oder es handelt sich um ein "soziales Projekt" hier im Forum.
Die Einlassung zu seinem "Problem" ist so weit offen für Vermutungen, (fast) keine Fakten, die wir überprüfen könnten.
Da bleibt nur "unwatch" und vergessen.
@Bu66as - Du ;), es findet sich doch immer noch jemand, der Bereit ist, Wasser zum Rhein zu tragen. Mit dir bis jetzt 4 Leute die ihm helfen wollten - der TE war am Samstag (!) zuletzt Online - kein Piep, kein Input - nix, nada! :)
Da sage ich...
Ah ok, 35 Storages auf 5 Nodes, ja das wird unübersichtlich. Trotzdem, nen reinen "im-Baum-ausblenden"-Schalter gibts in PVE echt nicht, der Node-Baum zeigt stur alles an, was am Node aktiv ist. Die einzige Möglichkeit bleibt die...
What versions are you running? I have just created a test VM and set the machine type to 'q35' with version '6.0' which then shows up in the output of `qm config ...` this line:
$ sudo qm config 100
....
machine: pc-q35-6.0
....
Oder es handelt sich um ein "soziales Projekt" hier im Forum.
Die Einlassung zu seinem "Problem" ist so weit offen für Vermutungen, (fast) keine Fakten, die wir überprüfen könnten.
Da bleibt nur "unwatch" und vergessen.
Hey,
When you say "in the web UI" what do you mean exactly? Are you talking about the field: "Your Windows VM" -> Hardware -> Machine?
Best Regards,
Tom
you need a reboot for all windows setting changes, As nothing in windows applies cleanly since windows 7, so it will delete the file instantly on boot when it reads the setting as it boots because you can't deactivate a page while is running.
Ah ok, 35 Storages auf 5 Nodes, ja das wird unübersichtlich. Trotzdem, nen reinen "im-Baum-ausblenden"-Schalter gibts in PVE echt nicht, der Node-Baum zeigt stur alles an, was am Node aktiv ist. Die einzige Möglichkeit bleibt die...
I will answer here since this is the original thread. Please avoid creating duplicate threads for the same topic.
Q1
The described configuration looks good and should be fine for production.
If you haven't already,ensure to check the wiki...
Hallo Falk,
Die NetApp ist eine ASA-C30. Die vorhandene 25Gbit/s-Karten sind die Anbindung der Proxmox-Knoten an die NetApp.
NVMe/TCP ist gesetzt, weil der für die NetApp zuständige Dienstleister das so empfohlen hat, die Lizenzen wären wohl...
Das würde ich grundsätzlich anders aufziehen:
#1 VM mit OpenWRT und dann Wireguard Client als Paket nachinstallieren
Dann hast Du einen kompletten Software Router und kannst nach belieben den Traffic routen. NAT für management dazu etc...
Hey there,
as @LnxBil and @Johannes S already mentioned, there's a patch which I created some times ago. However, it got rejected for "security" reasons (as in security of operators running upgrades). I'm not fully with this opinion as operators...