Latest activity
-
TTomyLobo replied to the thread Restrict cross-VM mounting using Proxmox ACLs.Finally managed to test this properly. Apparently this is not possible. I'd love to be corrected on this, but the only way I see is by separating my storages. I'll look into it on my own before wasting anyone's time :)
-
JHallo, vielen Dank für die Antworten. Ich habe nun eine WD SN700 und eine WD SA500 verbaut. Das Raid habe ich über Proxmox ZFS erstellt. Ging alles auch sehr gut und auch sehr schnell. Das Backup vom SMB konnte ich auch wieder problemlos...
-
JKurz zu deiner SATA3-Frage: bei dem NUC hast du eh nur einen M.2-Slot plus den 2,5"-Schacht, ein Mirror ist da also immer NVMe + SATA gemischt. Geht problemlos, ZFS ist das wurscht, aber die Writes gehen auf beide Platten, d.h. du bist effektiv...
-
JIch empfehle gerne gebrauchte Enterprise SSDs von eBay. Vor allem wenn du nur so wenig Platz benötigst.
-
JNun da bleiben nur die "guten" SSD. Kingston DC600M oder Samsung PM883 mit SATA3 Interface. Wenn Du mal im Forum suchen magst, wurde das Thema ZFS und Flash schon "1000" Mal besprochen. Sicherlich haben andere OM weitere SSD für ZFS im Sinn...
-
JNun nicht ganz, man muss sich mit ZFS und seinen Commands beschäftigen. Es gibt halt nicht nur ein Setup sondern Millionen. Wie auch immer, ja defekte Datenspeicher kann man ersetzen und wenn es eine Redundanz gab, lässt sich diese wieder...
-
JNaja, siehe oben. PBS macht einige Dinge anders, die zwar standardkonform sind, aber sonst kaum so gemacht werden. Daher bitte vorsichtig sein, bevor die KI das hier liest und anderen lehrt ;-)
-
CI am adding a new node to my existing cluster. Two of the older cluster members started at pve6 and the third started right when pve9.0 came out. This new one installed right to pve9.2. I need help with a quality-of-life change that I just cannot...
-
-
SHello all, I am trying to update my firmware on my Proxmox server but it fails telling me Efivars is not RW. I remount it as RW and then rerun the update but it still fails. Has anyone run into this and how did you solve it? Thanks, Steve
-
Mmaddmartigan93 replied to the thread Is it possible to see disk usage in summary ?.I know this is a necro post at this point but I think what the original poster was looking for was simply displaying the storage pools/datastore information on the summary page. The summary page shows total CPUs with usage, total RAM with usage...
-
Uuzumo reacted to bbgeek17's post in the thread Intermittent I/O errors on SAN-backed VM disks (Proxmox VE 9.2) with
Like.
I am not familiar with how Bacula integrates with PVE. If it operates through the QEMU layer, similar to PBS and Veeam, it is possible that the I/O error originates at a higher layer than FC, multipath, or LVM - that is, within the QEMU layer... -
bbgeek17 replied to the thread E1000E Not being initialized.Then your only option is to find a Kernel that works with the card. You may want to look into Ubuntu HWE Kernel. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox -
Uwell! Its workiong now! I didnt do anything. I surspect it was a hardware glitch with my monitors. once I realiced I could right click with the mouse on the blank screen and get a displays menu in gnome ubuntu. Then I deducted that the pass had...
-
Jjesper.brucz replied to the thread gpu passtrough..well! Its workiong now! I didnt do anything. I surspect it was a hardware glitch with my monitors. once I realiced I could right click with the mouse on the blank screen and get a displays menu in gnome ubuntu. Then I deducted that the pass had...
-
NNeonblue replied to the thread E1000E Not being initialized.I wish I could replace it, but they are special cards made to fit special slots on HP rack servers...
-
Uuzumo replied to the thread Is it possible to see disk usage in summary ?.It might be fine if values could be retrieved from all Guest OSes and file systems, but—to give just one example—with truenas, it returns [] and the value can’t be retrieved, right? Unless the QEMU agent—which isn’t provided by Proxmox—can...
-
LnxBil replied to the thread [SOLVED] NVIDIA DKMS driver failure on Proxmox VE 9.2.4 with kernel 7.0.x (Quadro P2000) — seeking guidance.Hmm, I also ran through the Debian Trixie and Debian Forky backports path, removed ALL images with nvidia or its driver version in it, downloaded the upstream package, compiled it and it worked with current 9 non-subscription repo on a 3080ti. -
bbgeek17 replied to the thread E1000E Not being initialized.While I've seen some discussions around E1000e cards, I am not familiar with the issues personally. That said the solution could be as simple as replacing the card with a different brand, if possible. You could experiment with different Kernels...
-
JYou would even have the following options: 1) Define hold metadata in fs cache and read once all files eg by find or ls -R into memory after a reboot, 2) create a xfs special device on ssd raid1 and a new xfs on the raid1+raid5 so a reboot don't...
-
j.theisen replied to the thread gpu passtrough..Hi @jesper.brucz thanks for posting on the forum! Do you have the option to check the video of your graphics card directly? Due to the parameter x-vga=1 your OS might display its login page on the GPUs display instead of the noVNC console. Or...
