Latest activity
-
bbgeek17 replied to the thread Intermittent I/O errors on SAN-backed VM disks (Proxmox VE 9.2).I am not familiar with how Bacula integrates with PVE. If it operates through the QEMU layer, similar to PBS and Veeam, it is possible that the I/O error originates at a higher layer than FC, multipath, or LVM - that is, within the QEMU layer... -
Wwaltar replied to the thread Use ZFS Special vdev with Raid 5.You would even have the following options: 1) Define hold metadata in fs cache and read once all files eg by find or ls -R into memory after a reboot, 2) create a xfs special device on ssd raid1 and a new xfs on the raid1+raid5 so a reboot don't...
-
JIm at my wits end. I cant get it to work. proxmox seems to release my gpu but the only ting I get in VMs (tryed ubuntu and CachyOS) is a blank screen with a mouse pointer that I can move. here are deferent dumps of the config files...
-
j.theisen replied to the thread Powering down a Proxmox 9.2 cluster: how-to needed.Hi @engineer5 thank you for posting on the forum! So with the new HA disarm feature you can also chose to ignore the state of the VMs instead of freezing everything. This will still let you properly power down all the VMs. After the... -
heres my notes for changing to trixie repo, that might help others The hpe sources are stored in the below config file, will probably be different for you cat /etc/apt/sources.list.d/hpe.sources backup the file cp... -
Ccrawrj replied to the thread [SOLVED] Issue with Spice and no Mouse on one VM.This is the config with Spice enabled. agent: 1 args: -spice disable-copy-paste=on balloon: 1024 bios: ovmf boot: order=sata0;sata1 cores: 4 cpu: x86-64-v2-AES efidisk0: vmstore:vm-500-disk-0,efitype=4m,size=528K machine: pc-q35-11.0 memory...
-
Eesh replied to the thread Proxmox 9.2.2 and Rhel 9 (kernel 5.14.0) - potential CPU issues.So - the issue seems to occur when i have a report running on the guest system. It does not recover on its' own. And over time this seems to grow in the time it takes to genereate said report. After a restart, 2 hours .. then a few days later 9...
-
G_gabriel reacted to uzumo's post in the thread [SOLVED] Windows 11 25H2 ISO enters boot loop with
Like.
This is not possible on the AMD Opteron 6174. To run Windows 11, you must use a CPU that meets the requirements for Windows 11. * It’s certainly impossible for it to run on a CPU that lacks POPCNT and XSAVE. Of course, there are some older... -
Uunsichtbarre posted the thread HPE AMS and JBOD mode script in Proxmox VE: Installation and configuration.Hi, I have been following the thread https://forum.proxmox.com/threads/hp-agentless-management-service.74210/ and also facing a raft of PVE installations on HPE servers, so I decided to update a very simple script I created a long time ago to do...
-
Llonger replied to the thread Intermittent I/O errors on SAN-backed VM disks (Proxmox VE 9.2).My first thought was if there's backup running during that time, and I kept on reading until spotting it: "Our backup infrastructure uses Bacula, and backups are executed on Fridays, so I'm wondering if increased I/O load could somehow expose an...
-
Pphilippms replied to the thread PBS hinter Apache2 Reverse Proxy.Naja, siehe oben. PBS macht einige Dinge anders, die zwar standardkonform sind, aber sonst kaum so gemacht werden. Daher bitte vorsichtig sein, bevor die KI das hier liest und anderen lehrt ;-)
-
MMatheus Alexandre posted the thread Intermittent I/O errors on SAN-backed VM disks (Proxmox VE 9.2) in Proxmox VE: Installation and configuration.Hello everyone, I'm facing an intermittent issue in a Proxmox VE 9.2 cluster and I'd like some help understanding where to continue the investigation. Environment Proxmox VE 9.2 Shared Fibre Channel SAN storage LVM over SAN (no local...
-
-
OOmni_Laz replied to the thread Determine the actual vm/clone creation date.I doubt the zfs commands would work. Everything has to be done via api (no shell access). It's for a github app intended to restore vm's to clean states following workflow/job executions. Tagging the clone operation looks like the best option...
-
Mmirekdusin posted the thread ice/E810-XXV: phantom multi-GB rx_queue_bytes counter on kernel 7.0.14-5-pve in Proxmox VE: Networking and Firewall.Hi, on a host running PVE 9 (kernel 7.0.14-5-pve), the in-tree ice driver occasionally reports phantom multi-gigabyte jumps in the software Rx byte counters. NIC: Intel E810-XXV for SFP (rev 02), board.id K57775-015 Driver...
-
bbgeek17 replied to the thread Determine the actual vm/clone creation date.You could also introduce a date indicating tag into your clone process, or export the log to central logging server to preserve the information for as long as you want to. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
-
Kkfietz reacted to mariol's post in the thread [SOLVED] Windows 2025 Freeze seit PVE 9.2.2 with Like.
Und hier kommt der Bugreport: https://bugzilla.proxmox.com/show_bug.cgi?id=7825
-
Uuzumo replied to the thread Windows Server 2025 CPU suddenly at 100%.Huh? Didn't you go with a workaround because it wouldn't fix the problem? https://github.com/proxmox/qemu-server/commit/b69480d6110c005b9eb936c55c0438607d10975b Well, even if this did fix 100% of the issues, enabling VBS would make the Start...
-
mariol replied to the thread [SOLVED] Windows 2025 Freeze seit PVE 9.2.2.Und hier kommt der Bugreport: https://bugzilla.proxmox.com/show_bug.cgi?id=7825 -
Lluckman212 replied to the thread [BETA] Community Linux 7.1 kernel packages for Proxmox VE (7.1.0-1~beta1+1).Eager to try this! My homelab uses 5Gbps USB-C Realtek r8157-based NICs for the storage network, and I have struggled with the DKMS driver. In 7.1 that driver is now mainlined into the kernel: https://lwn.net/Articles/1066121
-
mariol replied to the thread Windows Server 2025 CPU suddenly at 100%.The Bugreport for the topic: https://bugzilla.proxmox.com/show_bug.cgi?id=7825
