Latest activity
-
driley replied to the thread VM freezes when passthrough RTX 3080 to Windows 11 on Proxmox 9.2.3.Hi, Thanks for the follow-up. At the moment, I'm not exactly sure what could be causing this, especially since you mentioned it is now affecting the SATA passthrough VM as well. Could you please provide some more information to help... -
Sspooner posted the thread CheckMK Fehler Proxmox Monitoring: PVEScheduler und Interface Speed in Proxmox VE (Deutsch/German).Hallo Zusammen, ich hab mein erstes Proxmox Cluster in Betrieb genommen und auch meine erste CheckMK Monitoring Instanz eingerichtet. An sich läuft alles nach ein paar anfänglichen Problemchen. Aber das CheckMK meldet mir immer wieder zwei...
-
Sspooner replied to the thread Windows 10 VM nur Microsoft Display Adapter und dadurch nur 1280x800 als Auflösung.Musste den Treiber manuell installieren. Jetzt kann ich die Auflösung anpassen, höher schrauben. Vielen Dank für eure Unterstützung.
-
Hannes Laimer replied to the thread How do I add a 2nd host to a subnet that exists in the 1st host?.Add as in "add to cluster"(do you already have a cluster? generally 2-node clusters are not stable, you'd probably want a qdevice or third node[1]) or as in "i want guests to communicate over 10.10.10.0/24 with eachother"? I assume you want to... -
Hannes Laimer replied to the thread SDN VXLAN Troubleshooting Tools.Hey, each pve node renders the configured VXLAN into /etc/network/interfaces.d/sdn, ifupdown2 then reads this. For VXLAN there is no peering, this is how packets leaving the host get encapsulated, and how they get decapsulated at the target host...
-
Sspooner replied to the thread Windows 10 VM nur Microsoft Display Adapter und dadurch nur 1280x800 als Auflösung.Hallo, ich hab die GPU auf VirtIO GPU umgestellt, aber es bleibt bei "MS Display Adapter" Die ISO hatte ich gemountet und auch das Treiber Paket installiert, als ich von Hyper-V zu Proxmox migriert habe. Welche Treiber muss ich jetzt manuell als...
-
JJohannes S reacted to Impact's post in the thread LXC (Paperless-NGX) stürzt von Zeit zu Zeit ab... with
Like.
Das habe ich übersehen. Danke für den Hinweis. @kangaroo72 Dann bitte diese Infos zu Gemüte führen damit es nicht mehr vor kommt - Eins - Zwei - Drei Oder wie bereits vorgeschlagen, nicht mehr zuweisen als der Speicher hat. Man könnte nvme0n1p3... -
IIsThisThingOn reacted to fabian's post in the thread PBS incremental backup scans 162 GiB immediately after full 298 GiB backup finished with Like.
1: because the answer to 3 is yes, the bitmap tracks dirty writes since the start of the backup, since the backup itself is based on that point in time (it uses copy-before-write filtering, so that data being overwritten is backed-up before it is...
-
Ccuhanhtuoi replied to the thread How do I add a 2nd host to a subnet that exists in the 1st host?.It looks like there are no ports attached to vmbr1. I recommend adding at least one port before creating a cluster network. In a Proxmox cluster, you can configure up to 8 cluster networks. When creating the cluster, you can use your vmbr1...
-
Llaxarus replied to the thread User groups?.I am also interested in the groups. It is very inconvenient if you are using openid. The user first has to login via openid so that it can be created first then some admin manually needs to give the necessary permissions to that user. There is no...
-
LWell, in https://pbs.proxmox.com/docs/user-management.html, one can read : "Access Control By default, new users and API tokens do not have any permissions. Instead you need to specify what is allowed and what is not. Proxmox Backup Server uses...
-
Uuzumo replied to the thread Problems removing old Kernel 6.What will be the result of running the following command? Where is the ESP, and is there any free space? efibootmgr -v proxmox-boot-tool status lsblk -o NAME,FSTYPE,SIZE,TYPE blkid | grep -i "$(cat /etc/kernel/proxmox-boot-uuids)" mkdir -p...
-
AAnticlutch posted the thread How do I add a 2nd host to a subnet that exists in the 1st host? in Proxmox VE: Installation and configuration.I have two hosts. anti is the first, my primary host. It' s network devices looks like this. My goal is to add host 2, my new host, to the vmbr1 10.10.10.1/24 subnet. But I'm not sure how to do this, I don't know how to bridge, or connect the...
-
-
KKLez replied to the thread Problems removing old Kernel 6.Done, but for me there is no really useful information. Unfortunately the problem grows up, so that i can not install any new kernels :( The following package was automatically installed and is no longer required...
-
Eedwardintexas replied to the thread Proxmox 9.2.4 boot error - kernel panic.Quick update: I have installed proxmox on a new ssd so I can either fix the orig one or import vm's and config from the old to the new.
-
JJ-Rod replied to the thread PBS incremental backup scans 162 GiB immediately after full 298 GiB backup finished.How much time passed between the start of the first backup and the start of the second?
-
JJohannes S replied to the thread Datastore Sync Hook Scripts.Or combine with cronjobs/systemd timers to enable/disable vpn before and after running the syncs.
-
Jwhy ? keep the tunnel p2p with custom AllowedIPs
-
G_gabriel replied to the thread Datastore Sync Hook Scripts.why ? keep the tunnel p2p with custom AllowedIPs
-
Ddeebsr posted the thread Questions about OTEL Metrics listing in Proxmox VE: Installation and configuration.I have setup my PVE clusters to send to an OTEL endpoint ( in my case Grafana Alloy and into Mimir ). I'm trying to build out the Grafana dashboard panels but I'm having issues with figuring out what are the metrics to query. Some are obvious...
