Latest activity
-
Ttidal5 replied to the thread PVE 9.2 RAM Ballooning Not Working Right.
-
-
Jjrl_1644 reacted to whatishappening's post in the thread [SOLVED] Can't enable secure boot on windows VM, option greyed out with
Like.
OK the solution is way easier than I thought. Just power down, delete EFI disk, recreate it with pre-enrolled keys checked, then boot the VM. Finally found this in the manual under "10.2.11. BIOS and UEF" section. -
FFuriousRage replied to the thread [SOLVED] /var/ read-only.Did: smartctl -t short /dev/sda smartctl -t long /dev/sda smartctl -t conveyance /dev/sda smartctl -t select,123+345 /dev/sda smartctl -H /dev/sda === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result...
-
Ttidal5 posted the thread PVE 9.2 RAM Ballooning Not Working Right in Proxmox VE: Installation and configuration.I updated to 9.2 and now one of my VMs is only getting allocated the minimum RAM set in the balloon configuration (started at 3gb then moved the min to 10gb). I have 64GB of system memory to be allocated and I have the following setup: - LXC...
-
Vvirtualizerforlife posted the thread [BUG] TOTP window freezes sometimes when attempting to login and unable to click anything in Proxmox VE: Installation and configuration.Hi, I found possible bug that I would like to report here. Summary: When connecting to the local (hosted in the home network) instance of proxmox and entering login credentials everything is fine until this point. But when the login window is...
-
MMarkku reacted to berathram's post in the thread Upgrade incomplete with package conflicts with Like.
Oh my god, of course! These modernized debian list files got me confused... After adding the proper deb sources everything went well. You have my thanks!
-
Oh my god, of course! These modernized debian list files got me confused... After adding the proper deb sources everything went well. You have my thanks! -
Please try a different SATA cable, different port (or if possible a port on a different SATA controller)? Looks like something goes wrong between the CPU and the drive (storage medium) but maybe it's not the drive itself. EDIT: This is not...
-
UdoB replied to the thread [SOLVED] /var/ read-only.This is usually a hardware defect. Try another disk, after first checking all cabling and connectors - as already recommended by @leesteken. I would run an extensive self-test; search for "smartctl selftest" for this. If your are brave and...
-
Bberathram replied to the thread Upgrade incomplete with package conflicts.Oh my god, of course! These modernized debian list files got me confused... After adding the proper deb sources everything went well. You have my thanks!
-
Cccolotti replied to the thread Acme Technitium Plugin Errors.I actually don’t recall. I stopped trying to use it since mine wasn’t externally exposed and it has to be for it to work with ACME per the bugzilla conversation. I think I was just using the IP address for technitium and an API key I created...
-
Vvirtualizerforlife reacted to Impact's post in the thread [SOLVED] Unable to connect to internet when creating LXC without unprivileged container option with Like.
Please use code blocks to preserve formatting and don't censor so much and needlessly. Using local for virtual disks is a bad idea too (IMHO). Try to start the CT like this to get more information lxc-start -n 101 -F -l DEBUG Also try to enable...
-
Vvirtualizerforlife reacted to jklocker's post in the thread [SOLVED] Unable to connect to internet when creating LXC without unprivileged container option with Like.
Hi, Networking shouldn't be affected by switching between privileged and unprivileged containers - both should work the same way for basic internet access, so I'd guess something else is going on here. Could you post pct config <vmid> for both...
-
Vvirtualizerforlife reacted to Impact's post in the thread [SOLVED] Unable to connect to internet when creating LXC without unprivileged container option with Like.
I list my reasons in the linked article. Can you try with the 26.04 template? That worked for me. It's in the Options tab.
-
Vvirtualizerforlife replied to the thread [SOLVED] Unable to connect to internet when creating LXC without unprivileged container option.I have downloaded 26.04 template now and first I thought you meant with the Options tab that window when new LXC/CT is created BUT then I realized you meant the Options tab after the LXC/CT has been created in the Container tab. I found it and...
-
-
FFuriousRage posted the thread [SOLVED] /var/ read-only in Proxmox VE: Installation and configuration.I just installed 9.0-1 on an older computer (i5 from 2014), ddr3-era. 9.2 couldnt install. i managed to update to pve-manager/9.2.2/b9984c6d90a4bd80 (running kernel: 7.0.2-6-pve) --- How ever, when i try do some stuff, /var/ seems to be...
-
Sshandee replied to the thread Acme Technitium Plugin Errors.Thanks for replying! I've got that far, but how do I specify the technitium server IP address? (does it assume the system dns is the technitium server?) And what goes in the API Data field? (just a technitium api key?)
-
Aabufrejoval replied to the thread Way more NAGware, very little functionality, bugs galore.I'd like nothing more than being proven wrong! It's just that 45 years in the industry have made me become somewhat paranoid...
-
Aabufrejoval reacted to Johannes S's post in the thread Way more NAGware, very little functionality, bugs galore with Like.
Yes, otherwise I wouldn't have used it ;) Correct, I'm also not paying for Proxmox. But I also don't expect developers to give freebies to me. I'm trying to help in other terms, e.g. by participating in the forum or being a free beta tester ;)...
-
Uuzumo replied to the thread QEMU 11.0 available on pve-test and pve-no-subscription as of now.I've only set `default_hugepagesz=1G`, but whether I specify `hugepages: 1024` or not, the CPU usage remains at 100%. The performance drop is so noticeable that even mouse movements feel sluggish—don’t you experience the same thing? However...
