Latest activity
-
MDa kann man durchaus drüber diskutieren, spätestens seit der Erfindung von ZFS :-) Ein Hardware-Raid liefert NICHT: Herstellerunabhängigkeit; transparente Kompression; garantierte Integrität; (technisch) billige Snapshots; Replikation; einfache...
-
FFlocki replied to the thread [SOLVED] SDN Fabric issues since update 9.1.14.Hi, this is the configuration and the tcpdump is attached as files. Node 1: ip a show dummy_backhaul 58: dummy_backhaul: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether...
-
MMarkku replied to the thread Upgrade incomplete with package conflicts.You don't have any Debian repo configured?
-
TTErxleben replied to the thread Promox startet nicht mehr nach Update auf Version 9.Darf ich mal fragen, warum du einen Thread als @basti123 startest und als @kuerfra fortsetzt? Nebenbei lieferst du "Informationen" die Cluedo alle Ehren machen. Sozusagen Baronin Patrizia von Porz in der Bibliothek mit dem Leuchter.
-
Ooptical posted the thread TASK ERRORS after upgrade from 8 to 9 in Proxmox VE: Installation and configuration.Hi there, this keeps popping up and I don't know why! client connection: 127.0.0.1:36950 error reading from pty: Input/output error (os error 5) TASK ERROR: command '/usr/bin/termproxy 5900 --path /vms/202 --perm VM.Console --vncticket-endpoint...
-
-
WWoisWoi replied to the thread Best way to migrate a multi-disk VM from LVM to different ZFS Pools for Storage Replication?.Of course, but there is not enough space to restore on the HDD. Even the HDD alone, it says it doesn't have enough space; I don't get it. I went on "my long solution", which is restoring the VM without the "HDD disk" on the NVMe, then restoring...
-
Thanks everyone for helping me with this problem. I decided to move all data to another pool (no SMR drive) and remove those drives from the server. I will mark this as Solved. -
UUpstairs_Cycle384 replied to the thread QEMU 11.0 available on pve-test and pve-no-subscription as of now.Do you pass any hugepage kernel parameters on your Proxmox host? https://dev.to/sergelogvinov/proxmox-hugepages-for-vms-1fh3
-
UdoB reacted to Johannes S's post in the thread Best way to migrate a multi-disk VM from LVM to different ZFS Pools for Storage Replication? with
Like.
You should be able to move the disc to another storage in the vm settings after migration to the target node. -
UUpstairs_Cycle384 replied to the thread Secure Boot Violation / Invalid Signature Detected after upgrading to Proxmox 9.2.Are the new shims already available? I asked about this recently: https://forum.proxmox.com/threads/new-secure-boot-shim-on-proxmox-host.183404/ I did a full update on my proxmox host (now running 9.2.2) and I can see that the shims are still...
-
JSadly even non pro ironwolf are 7200RPM very noisy and high power consumption compared to WD, I think they just throttle to 5400RPM performance in firmware but still fast spin. WDC red 'plus' and 'pro' are ok, they not SMR, but avoid the standard...
-
JJohannes S replied to the thread Best way to migrate a multi-disk VM from LVM to different ZFS Pools for Storage Replication?.You should be able to move the disc to another storage in the vm settings after migration to the target node.
-
Aandretona replied to the thread [SOLVED] Need help with my ZFS pool.Thanks everyone for helping me with this problem. I decided to move all data to another pool (no SMR drive) and remove those drives from the server. I will mark this as Solved.
-
Kkuerfra replied to the thread Promox startet nicht mehr nach Update auf Version 9.Jetzt startet er nur noch ohne USB Stick im Visual Bios vom NUC713BNB, Partition heißt UEFI: proxmox Part1 OS Bootloader
-
JProxmox 8.4 to the current 9.2.2 is the way to go, 9.1 is possible but quite complicated. Keep in mind that 7.0 is actually just 6.20 but Linus doesn't like large numbers. ;) So the step is less daunting than it seems. That said, you can always...
-
ASadly even non pro ironwolf are 7200RPM very noisy and high power consumption compared to WD, I think they just throttle to 5400RPM performance in firmware but still fast spin. WDC red 'plus' and 'pro' are ok, they not SMR, but avoid the standard...
-
Kkuerfra replied to the thread Promox startet nicht mehr nach Update auf Version 9.Werden erkannt, startet im Bios modus der NUC (UEFI) Wenn ich mit USB Stick Proxmox 9 boote ist der normale Install Bildschirm da. Dann Im Boot Menu des USB Sticks, Rescue auswähle. Kommt bei mir eine Fehlermeldung: error: no such devive ...
-
DDarkbotic replied to the thread Secure Boot Violation / Invalid Signature Detected after upgrading to Proxmox 9.2.Thank you t.lamprecht Sadly, as janus57 mentioned, currently HP doesn't want to provide BIOS updates. I'm going to try the recommendation I got to see if I can update the Certs without a BIOS update.
-
Aandretona reacted to IsThisThingOn's post in the thread [SOLVED] Need help with my ZFS pool with Like.
Do you expect a connection error and not the probably very old 2TB WD red drive? VRPF failed, right? You pulled it out and inserted the 9TN2, right? BTW don't do that if you have enough bays. Just insert the new drive and let the resilver do...
-
AIirc WD20EFAX are SMR ("Shingled ..."). It is really a game of luck to make them work with ZFS. (Read https://www.truenas.com/docs/hardware/notices/wdsmr/ ) Problems especially during resilvering are somewhat... expected.
