Latest activity
-
Ccrazywolf13 posted the thread [SOLVED] NVIDIA 580.x + Kernel 7.0 incompatibility on Trixie in Proxmox VE: Installation and configuration.Has anyone got any idea for my seeminly hopeless situation with nvidia drivers on the proxmox host? Hardware: GTX 1060 (Pascal) + GTX 180 Ti (Kepler) PVE version: 9.1.2 The problem: Nvidia Driver 580.x is the last series supporting...
-
Ssacredx72 replied to the thread Problems with PCIe passthrough with two identical devices.I didn't see or find any contacts or a link to create a ticket, only a screenshot from my email =) maybe I didn't look hard enough =) Question: As a temporary solution, without rebuilding a custom kernel, changing the file -...
-
Uuzumo replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.I see. I had assumed you were talking about a NIC.
-
Pph4zed posted the thread datacenter directory only has 100GB? in Proxmox VE: Installation and configuration.I've got a box with a few spare spinning disks in it, so I thought I'd set up ZFS pools, then build directories on them for purposes of VM backups from different nodes. The backups from some containers and small disk VMs will go fine, but it...
-
Ggfngfn256 replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.I believe the posters only complained while using a Tailscale NW with the above - your output appears to be on local lan only.
-
Uuzumo replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.I also have a ConnectX-4 Lx on my computer, but I haven’t noticed any significant slowdown. Virtual machines running on a computer with a Mellanox Technologies MT27710 Family [ConnectX-4 Lx] Ethernet controller and virtual machines running on a...
-
Eericcl reacted to rdolezel's post in the thread Solution for "The repository 'http://download.proxmox.com/debian/pbs-client trixie InRelease' is not signed" error with
Like.
After installing proxmox-archive-keyring_4.0_all.deb you can also modernize sources via: # apt modernize-sources -
Eericcl reacted to jterry's post in the thread Solution for "The repository 'http://download.proxmox.com/debian/pbs-client trixie InRelease' is not signed" error with Like.
Hello I've solved this error with PBS Client in Debian 13 (Trixie): Warning: OpenPGP signature verification failed: http://download.proxmox.com/debian/pbs-client trixie InRelease: Sub-process /usr/bin/sqv returned an error code (1), error...
-
Tterramotu replied to the thread [SOLVED] Dell R730 cannot boot Proxmox 9 kernel (boot loop after install).Thanks @Onslow ! The guide perfectly solved my issue and I successfully booted the proxmox kernel !
-
GGnosh replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.driver: atlantic version: 7.0.2-2-pve firmware-version: 1.3.24 expansion-rom-version: bus-info: 0000:0e:00.0 supports-statistics: yes supports-test: no supports-eeprom-access: no supports-register-dump: no supports-priv-flags: yes Definitely...
-
Ccelemine1gig replied to the thread Problems with PCIe passthrough with two identical devices.@sacredx72: See here: https://forum.proxmox.com/threads/problems-with-pcie-passthrough-with-two-identical-devices.149003/post-826291 Same procedure.
-
Uuzumo replied to the thread Unable to get Arc Pro B50 to function.I don’t own an Arc Pro B50, so I can’t say for sure, but I use an Arc B580 and have never made any configuration changes under /etc/modprobe.d/. It will work properly simply by adding the necessary vfio-related entries to `modules` and specifying...
-
KKingneutron replied to the thread 7.0.2-2-pve breaks Graylog due to MongoDB on an LXC..https://search.brave.com/search?q=linux+kernel++breaks+mongodb&summary=1&conversation=091155146a6ea0e8301d2f368ba78ca1a165 I remember reading about the issue a couple of weeks ago but the article might have been in an app, can't find the exact...
-
Ssacredx72 replied to the thread Problems with PCIe passthrough with two identical devices.This is all great and good, but I’m surprised that this patch was made only for 1164, I have similar devices, but on an asm1166 chip, and they have exactly the same problem. I think that this problem applies to the entire 116* line and requires a...
-
KKingneutron replied to the thread Check the disk usage of a virtual machine.> After I created a Linux virtual machine in proxmox, I allocated 40G of space to it, and then I wanted to check its real-time disk usage. Rate, for example, he uses 10G in the system. I want to get this approximate value. When I use du -h to get...
-
Mmystica555 replied to the thread [SOLVED] ZFS Problem with DirtyFrag Fix Kernel.If you aren't averse to kernel 7, 7.0.2-2-pve works fine with zfs for me.
-
KKingneutron reacted to hstende's post in the thread Check the disk usage of a virtual machine with Like.
This project looks promising in monitoring disk usage etc: https://github.com/rcourtman/Pulse
-
KKingneutron reacted to somedude's post in the thread Check the disk usage of a virtual machine with Like.
`df` does not work with files. It reports filesystem utilization.
-
KKingneutron reacted to SInisterPisces's post in the thread Check the disk usage of a virtual machine with Like.
Thi would be a great feature Thanks for referencing that bug report, @smalltrex ! That bug's been open since 2017. ZFS didn't even allow that kind of filesystem query then, so hopefully we're in a better position now for this feature to become...
-
KKingneutron reacted to MacGyver's post in the thread Check the disk usage of a virtual machine with Like.
> apt install jq > qm agent 100 get-fsinfo | jq -r '.[] | select(has("total-bytes")) | .mountpoint + " is " + ((."used-bytes" / ."total-bytes" * 100) | round | tostring) + "% full"' Example output for a *nix VM: /var/log/journal is 67% full...