Latest activity
-
TTightrope2718 posted the thread Unable to get Arc Pro B50 to function in Proxmox VE: Installation and configuration.Hello, I have been struggling with this issue for awhile, but I am unable to proceed further. I cannot seem to find anyone else who is having a similar issue to me. In my server I have an Arc A380 that I wanted to upgrade to an Arc Pro B50. My...
-
RReev replied to the thread Config for Network UPS Tool (NUT) for Prolink.Hello, I am using a PRO1201SFCU and when I try to do step 10 @ upsdrvctl start, it shows this output at the attached file. I am currently stuck at what I am supposed to do now and I would really appreciate any help I could get
-
-
Eepionier replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.@Gnosh You can read out information of driver and firmware version via: ethtool -i eth0 (eth0 needs to be replaced by your real adapter name) edit: According to Link Forum a user with ProArt X870E updated succesfully fw to 1.5.45
-
WWolveraptor replied to the thread [SOLVED] AlmaLinux 10 LXC Start-Up Error.I also tried making a privileged LXC but it is the same error. I do recall that RHEL 10 as a VM also does not work and the LXC behavior seems similar to this post about RHEL, AlmaLinux, and Rocky Linux 10 in this post. Unfortunately, since I...
-
-
WWolveraptor posted the thread [SOLVED] AlmaLinux 10 LXC Start-Up Error in Proxmox VE: Installation and configuration.Hey there Proxmox Community! Hoping to get get some assistance in diagnosing what the issue may be. It sounds like it may have something to do with this. The below is the output of pct start 300 --debug. INFO confile -...
-
GGnosh replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.I'm on ProArt X870E-CREATOR. Need to look in to that. @bossanova808 looks very similiar. Only difference for me was that I have it running in a VM. Having firewall on/off made no difference.
-
Aalexskysilk replied to the thread iscsi direct luns with multipath.fiber channel multipathing works effectively identically to iscsi; once the devices are captured by multipathd they'll just show up in /dev/mapper and you can use them as any other mapper device- so you can put a vg on it or map is as a drive...
-
Mmatto replied to the thread [SOLVED] Snapshots error - qmp command 'blockdev-snapshot-internal-sync' failed - Cannot find device='drive-tpmstate0'.Has now been solved, upgraded qemu-server to versoion 9.1.10 and the issue is now fixed.
-
FFlyByWire replied to the thread Backup auf neues NAS / Permisison denied.Das Problem mit den Zugriffsrechten habe ich mittlerweile mit Gemini gelöst (No Root Squash). Ich habe dann auch gleich mal die Empfehlung umgesetzt und einrm -rf /tmp/vzdumptmp* gemacht. Außerdem habe ich die tmpdir: /mnt/pve/Lan30TB/dump in...
-
Eepionier replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.@Gnosh I do not know what board you are using but did you consider following for your AQC113* chipset: 1) Try a newer driver (if so) - v2.5.16 https://www.marvell.com/support/downloads.html 2) Try to flash a newer firmware for AQC113* chipset...
-
Aalma21 replied to the thread iscsi direct luns with multipath.Hi, is there something similiar for Fiber channel LUNs -> attach through the PVE storage stack to VM ... or is the local multipath device passthrough (qm set --scsi0 ....) the preferred way here ? beside complete PCI/FC HBA passthrough to...
-
Bbarberos reacted to totae's post in the thread [SOLVED] Veeam Backup Issue with Offline VM on LVM ontop SAN with
Like.
Hello, It's work thank you. Best Regards, -
Uutkonos replied to the thread [SOLVED] ZFS Problem with DirtyFrag Fix Kernel.I am able to boot from the previous kernel as I noted above. Is there a workaround for booting from the new kernel with the security fix?
-
Ah, meine Schuld. Fehler gefunden. Ursache war, dass die Disk nicht an Position 1 Stand und kein Haken drin war -
Aanbischo replied to the thread Bootdisk-Size.Ah, meine Schuld. Fehler gefunden. Ursache war, dass die Disk nicht an Position 1 Stand und kein Haken drin war
-
-
Sslidermike reacted to reutli's post in the thread [SOLVED] Update to version 9 - fail systemd-boot with Like.
solved it on my own: as the entry Boot0002* proxmox HD(2,GPT,a0e229a8-843d-4bdd-89f3-a9529fecbf35,0x800,0x200000)/File(\EFI\PROXMOX\GRUBX64.EFI) is showing GRUB as bootloader, it should be save to delete 'systemd-boot'. Therefore I did...
-
AHallo zusammen, kann mir jemand helfen und sagen, Warum mir in PVE 9.1.9, Kernel 7.0.0-3, von einer Ubuntu VM 26.04, die Bootdisk-Size nicht angezeigt wird?
-
-
VSome things to consider: 1. Connectx3 cards were often shipped as VPI cards. what that means is that each port can operated as ethernet or IB. When set to auto mode (default) they will default to IB when no link is detected at boot. You can and...
-
FFlyByWire posted the thread Backup auf neues NAS / Permisison denied in Proxmox VE (Deutsch/German).Hallo zusammen, ich brauche mal Hilfe. Meine Proxmox backups mache ich auf ein Synology NAS, dass ich per NFS eingebunden habe. Da das NAS (LAN24TB) langsam den Geist aufgibt, habe ich per HyperBackup ein restore auf die neue NAS (LAN30TB)...
-
Vvesalius reacted to recursivedelete's post in the thread [SOLVED] intel x553 SFP+ ixgbe no go on PVE8 with Like.
Thank you for this feedback! Thanks to these suggestions I've got the connection working now. Here was the process: I'm using DAC cables (Cisco SFP-H10GB-CU1M). First I tried swapping one out for another and the problem remained. (The cables had...
