Latest activity
-
VVTECnKitkats replied to the thread [SOLVED] Yet another AMD Reset Bug/Vendor Reset Thread.I'm sorry, I am not sure what you mean by "after loading the vendor-reset module but before starting the VM." How do I load the vendor reset module? The output of modprobe vendor-reset is modprobe: FATAL: Module vendor-reset not found in...
-
Pportedaix replied to the thread Backup speed regression: 2h20m → 8h39m after PVE 8→9 / QEMU 9.2→10.1 / Ceph 18→19 upgrade.Hi Moayad — image-level results below. Short version: you nailed it. The image itself benches dramatically worse than a scratch image on the same pool, especially in single-thread small/medium I/O. Image identification qm config 162 | grep...
-
Ggfngfn256 replied to the thread [SOLVED] Applying pve-qemu-kvm 10.2.1-1 may cause extremely high “I/O Delay” and extremely high “I/O pressure stalls”. (Patches in the test repository.When you migrate the VM to another node, the new node is freshly starting the kvm instance (with the new pve-qemu-kvm version) - in fact it is also freshly "booting" the VM - as if it were just now booting - just the state (incl. RAM) has been...
-
Mmartin_comp replied to the thread [SOLVED] Applying pve-qemu-kvm 10.2.1-1 may cause extremely high “I/O Delay” and extremely high “I/O pressure stalls”. (Patches in the test repository.I just wondered about this and had these thoughts: When I migrate a VM from pve-node-1 to pve-node-2 it (and pve-node-2 has the patch) the patch will be applied and the problem is fixed without rebooting the VM from proxmox. Why cant proxmox...
-
TTErxleben replied to the thread nicht vergessen: UEFI-Zertifikate Eurer EFI-Disk Instanzen 06.2026!.Die möglichen Folgen sind mir ja durchaus bewusst. Darum frage ich ja. Nebenbei lasse ich mich nur sehr ungern am Nasenring durch die Manege führen. Das ist eine Mafiamethode: "Wenn du bis zum Tag X nicht reagierst, dann hast du ein Problem!"...
-
Ggfngfn256 replied to the thread [SOLVED] Applying pve-qemu-kvm 10.2.1-1 may cause extremely high “I/O Delay” and extremely high “I/O pressure stalls”. (Patches in the test repository.AFAIK, that is perfectly normal - as the new pve-qemu-kvm will only be applied on a host restart of the kvm, not internally by a VM reboot, which technically does not restart the kvm host-side.
-
Mmartin_comp replied to the thread [SOLVED] Applying pve-qemu-kvm 10.2.1-1 may cause extremely high “I/O Delay” and extremely high “I/O pressure stalls”. (Patches in the test repository.Can also can confirm it fixes the issue, but to take effect I had to reboot the VMs (from Proxmox, not from within the VM).
-
Bboisbleu replied to the thread nicht vergessen: UEFI-Zertifikate Eurer EFI-Disk Instanzen 06.2026!.Wenn die Zertifikate nicht vor Ablauf erneuert werden, können sie danach nicht mehr aktualisiert werden. Wie auch - es gibt dann ja keine gültigen Zertifikate mehr, die die neuen installierbar und verifizierbar machen.
-
JJohannes S reacted to leesteken's post in the thread [SOLVED] Yet another AMD Reset Bug/Vendor Reset Thread with
Like.
This makes debugging harder because the Proxmox host console no longer works. You also don't need this when vendor-reset works. Please undo this. Run the command on the Proxmox host after a reboot, after loading the vendor-reset module but... -
Wweconnect posted the thread [SOLVED] Proxmox VE 9.1.9 issues? in Proxmox VE: Installation and configuration.Hello i have a few proxmox servers and when i go to the console i just see Loading... and on linux i can interact with the console but not if the vm is windows.. here is PVEVersion: pveversion -v proxmox-ve: 9.1.0 (running kernel: 7.0.0-3-pve)...
-
JJohannes S reacted to gfngfn256's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available on test and no-subscription with Like.
No force was applied. You can still use any previous kernel - as you are doing now.
-
JJohannes S reacted to TErxleben's post in the thread nicht vergessen: UEFI-Zertifikate Eurer EFI-Disk Instanzen 06.2026! with Like.
Das war/ist auch immer mein Gedanke. Kein Secureboot und die Nummer ficht mich nicht an. Ich glaube, ich werde beobachten was nach Ablauf der Frist geschieht und dann erst evtl. mit den Flügeln flattern
-
JJohannes S reacted to uzumo's post in the thread The Reasons for poor performance of Windows when the CPU type is host with Like.
Up to Qemu 11, the only option is “Disabled.” Without hardware acceleration, performance will likely drop significantly. https://forum.proxmox.com/threads/qemu-10-1-available-on-pve-test-and-pve-no-subscription-as-of-now.175350/post-850543 The...
-
UdoB reacted to deebsr's post in the thread [Feature Request] - Remote Migration - Allow re-ID of VM automatically using Target cluster's VMID range with Like.
I have also added to the Bugzilla page for this feature: https://bugzilla.proxmox.com/show_bug.cgi?id=7547 -
Kkur1j replied to the thread Proxmox 9.1.7 RTX 6000 Pro drops off PCI bus.Well I think power state issue is potentially a red herring because the devices have dropped off the PCI bus and I can't get them back without restarting the whole system. Maybe the problem is that the power state WAS changed initially and it...
-
Mmonkfish replied to the thread [SOLVED] Applying pve-qemu-kvm 10.2.1-1 may cause extremely high “I/O Delay” and extremely high “I/O pressure stalls”. (Patches in the test repository.@fiona Thanks for that - I see pve-qemu-kvm-10.2.1-2 in pve-test as of time of writing. I had 2 updates on my test lab whether or not the other one is applicable to this bug or just coincidence wouldn't know. For those that used workaround from...
-
Uuzumo replied to the thread The Reasons for poor performance of Windows when the CPU type is host.Up to Qemu 11, the only option is “Disabled.” Without hardware acceleration, performance will likely drop significantly. https://forum.proxmox.com/threads/qemu-10-1-available-on-pve-test-and-pve-no-subscription-as-of-now.175350/post-850543 The...
-
Mmonkfish reacted to fiona's post in the thread [SOLVED] Applying pve-qemu-kvm 10.2.1-1 may cause extremely high “I/O Delay” and extremely high “I/O pressure stalls”. (Patches in the test repository with Like.
@martin_comp Yes, the issue affects IO delay (the name for iowait in the UI) too. A fix was applied in git master and the new pve-qemu-kvm=10.2.1-2 package is currently going through internal testing.
-
Jjpbstark posted the thread [SOLVED] Connection failed (Code: 1006) w/ Xterm Console in Proxmox VE: Networking and Firewall.I'm new to Proxmox and networking so apologize if I'm not using correct vernacular and if this is the wrong forum. Tinkering with all of this to teach myself something new. I tried to install nginx and did some other cleanup of my PVE and found...
-
-
Ggfngfn256 replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available on test and no-subscription.No force was applied. You can still use any previous kernel - as you are doing now.
