Latest activity
-
TTErxleben replied to the thread nicht vergessen: UEFI-Zertifikate Eurer EFI-Disk Instanzen 06.2026!.Das war/ist auch immer mein Gedanke. Kein Secureboot und die Nummer ficht mich nicht an. Ich glaube, ich werde beobachten was nach Ablauf der Frist geschieht und dann erst evtl. mit den Flügeln flattern
-
Ddeebsr replied to the thread [Feature Request] - Remote Migration - Allow re-ID of VM automatically using Target cluster's VMID range.I have also added to the Bugzilla page for this feature: https://bugzilla.proxmox.com/show_bug.cgi?id=7547
-
Ddeebsr posted the thread [Feature Request] - Remote Migration - Allow re-ID of VM automatically using Target cluster's VMID range in Datacenter Manager: Installation and configuration.Hello all, When migrating a VM to another remote cluster it would be nice to have a check box or some kind of option to have that VM get its VMID changed to a VMID from the target cluster VMID range. Reason for this is that if we have shared...
-
Sshactheorb replied to the thread [SOLVED] Node in other building keeps showing up as offline to other 2 nodes, possible corosync issues?.I also noticed that any pings that use an MTU above 1350 fail between the nodes in separate buildings, but not sure if that's related
-
TThomasG8235 reacted to ThoSo's post in the thread [SOLVED] Proxmox Kernel 7.0.0-3-pve - Installation nicht möglich aufgrund NVIDIA 580.126.18 with
Like.
Treiber von NVIDIA? Schau mal hier: https://www.reddit.com/r/debian/comments/1f44nss/uninstall_official_nvidia_drivers_and_install/?tl=de Der deinstalliert mit parameter Bsp ./NVIDIA-Linux-x86_64-560.35.03.run --uninstall -
TThomasG8235 replied to the thread [SOLVED] Proxmox Kernel 7.0.0-3-pve - Installation nicht möglich aufgrund NVIDIA 580.126.18.Moin, also danke @ThoSo - mit dem Befehl ./NVIDIA-Linux-x86_64.580.126.18.run --uninstall bin ich den Nvidia Treiber wieder losgeworden. Jetzt muss ich nur noch den angepinnten Kernel Boot deaktivieren. Weder mit unpin noch mit remove lässt sich...
-
CCookiefamily replied to the thread [SOLVED] Can't get mixed mode vGPU to work on NVIDIA A40.I created a systemd oneshot service for this: /etc/systemd/system/nvidia-shm.service [Unit] Description=Enable NVIDIA Heterogenous Time-Slice Sizes Before=pve-guests.service After=nvidia-vgpud.service nvidia-vgpu-mgr.service [Service]...
-
Best practice is to wipe the node, remove it from the cluster, install a fresh Proxmox with a new name and IP address and add it to the cluster as a new node. This procedure is the same regardless of which hardware parts are reused. -
Dd.konyayev replied to the thread ceph-osd crashes with kernel 6.17.2-1-pve on Dell system.+
-
Ddiego replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.Since the update to kernel 7.0.0-3, my VMs that used ppp do not work anymore in LXC containers (privileged). I was using openfortinet and since upgrade I get: ``` Couldn't set tty to PPP discipline: Operation not permitted ERROR: read...
-
TTErxleben replied to the thread nicht vergessen: UEFI-Zertifikate Eurer EFI-Disk Instanzen 06.2026!.Ich war bisher der blauäugigen Meinung, maximal eine VM herunterfahren zu müssen und anschließend qm enroll-efi-keys <VMID> würde ausreichen, zumindest sofern kein bitlocker verwendet wird. Wie denn nun? Tatsächlich einzeln in den guests rumbasteln?
-
Ssqlmaster posted the thread [ANNOUNCE] Gorgona Notification Bridge for Proxmox VE in Mail Gateway: Installation and configuration.Tired of siloed notifications in Proxmox VE? I built a lightweight bridge that forwards native Proxmox (8.2+) webhook alerts directly into the Gorgona P2P mesh, giving you decentralized, real-time visibility across your infrastructure. Why try...
-
Sshactheorb posted the thread [SOLVED] Node in other building keeps showing up as offline to other 2 nodes, possible corosync issues? in Proxmox VE: Installation and configuration.I have a total of 3 nodes, 2 in one building and 1 in another building. Every couple of weeks, the one in the other building shows up as offline to the other two, and vice versa. I'm able to ping between nodes, but they still aren't showing up as...
-
VVTECnKitkats replied to the thread [SOLVED] Yet another AMD Reset Bug/Vendor Reset Thread.didn't reply, see above, sorry.
-
VVTECnKitkats replied to the thread [SOLVED] Yet another AMD Reset Bug/Vendor Reset Thread.I have deleted video=vesafb:off,efifb:off and nofb nomodeset and added initcall_blacklist=sysfb_init to my grub file. Can you explain how I should execute echo device_specific >"/sys/bus/pci/devices/0000:28:00.0/reset_method" and how I would...
-
fba replied to the thread Restoring node, pinned nics.Well for same node, either copy them over or use the mentioned command, whatever is easier for you to do. -
VVTECnKitkats posted the thread [SOLVED] Yet another AMD Reset Bug/Vendor Reset Thread in Proxmox VE: Installation and configuration.Hello all, I am a very green linux/home NAS user and am having a reset issue on windows 10 VM on Proxmox 9.1.9 with my 5700 XT. I am running my system with a single GPU headless and want the ability to access my NAS (contained within the same...
-
jsterr replied to the thread The Reasons for poor performance of Windows when the CPU type is host.Im not much into windows and do not have a vm currently available, does someone have a comparision between Windows-VM with Host and nested-virt "on" or "+" VS Windows-VM with Host but nested-virt disabled "-"? If not I will do some testing in the... -
Nns33 replied to the thread Restoring node, pinned nics.Should've stated, its the same node
-
Jjust fyi: we have a table of tested driver versions with kernel compatibility in our wiki: https://pve.proxmox.com/wiki/NVIDIA_vGPU_on_Proxmox_VE