Latest activity
-
Wwendellrodriguez reacted to Upstairs_Cycle384's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with
Like.
@t.lamprecht I saw this commit: https://git.proxmox.com/?p=pve-kernel.git;a=commit;h=1e810d779b50dd5e7395fa65ad7b3cbf89b910c1 Which is great. Also saw some testing from David Riley here... -
Wwendellrodriguez reacted to rage's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
I read that Kernel 7 has now SR-IOV already enabled. Any hint how to use / enable it ? I would need it for the intel iGPU (265H)
-
Wwendellrodriguez replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.Now we can test GNOME 50 on linux kernet 7 :)
-
CHello, I just want to say, this card now works with 4.15.18-3-pve out of the box which was not the case until 4.15-17. - The Link doesn't show "NO-CARRIER" anymore - The nodes can ping each other via 10GBit - Also the Switch-Port LEDs lights up...
-
AAminal_Panel reacted to Sammy51's post in the thread [SOLVED] Update to version 9 - fail systemd-boot with Like.
How to check if systemd-boot is being used — and how to safely remove it Step 1: Check which bootloader is in use (if it is grub for example it is saffe to remove systemd-boot) Run the following command to inspect your current EFI boot...
-
Ccpns posted the thread Proxmox 8.4 and Veeam Backup issue while the VM is offline in Proxmox VE: Installation and configuration.We recently converted from VMware and are wondering if anyone else here is having issues backing up offline VMs with Veeam BR? Do you have a recommendation for a workaround other than powering those VMs manually during the backup schedule? When...
-
OObviously Forced replied to the thread Restore von CT Backup funktioniert nicht.Hallo zusammen, ich beantworte die Fragen / Punkte mal chronologisch: * das läuft dann aber komplett neben der Proxmox-Schiene Das ist korrekt. Die Ansätze es auf der "Proxmox-Schiene" zu machen sind in den vorigen Post dokumentiert. Proxmox...
-
Mmrmdemic posted the thread Clean install Connection error - not loading WEB GUI in Proxmox VE: Installation and configuration.Hi All, To begin i am totally new with Proxmox, i have seen a lot of videos on what you can do with it so i decided to grab some hardware and start my adventure. Before i had created multiple setups with VMWare ESXi Clusters but since i have...
-
-
Pproque_cu replied to the thread Proxmox roadmap - future direction of snapshot‑as‑volume‑chain.Would it be possible on their end for LVM Thin to be shared? That would be the best of both worlds...
-
Aalexskysilk replied to the thread confused...CEPH delivering same performance on 100G as it did on 1G test.that explains your observed performance. LACP is your first choice. if thats not possible, use active-backup and MAKE SURE the switches have plenty of bandwidth interconnecting them. balance-xor sounds good on paper but not in practice. set...
-
strukturierte task ergebenisse haben wir schon laenger auf der todo liste stehen - derzeit haben alle tasks eben nur die felder die du da siehst, notifications werden als teil der task execution generiert wo noch mehr infos zur verfuegung stehen.. -
AIDE geht eigentlich immer, ist nur richtig langsam. Deshalb nutze ich für den ersten Boot IDE und nachdem die Treiber installiert sind, wechsel ich immer zu Virtio.
-
OObviously Forced reacted to CoolTux's post in the thread Restore von CT Backup funktioniert nicht with Like.
Ich gehe mal davon aus daß es ein einmaliger Fehler war. Aber das kann nur der Threadersteller uns sagen wenn er den restore nach der Aktion testet.
-
Ddot. replied to the thread backup remote files directly on tape.I'm digging out this old thread... Does a S3-backend combined with local cache qualify as "local datastore" (a local, on-prem S3 without any network bottlenecks, not AWS, backblaze or such) ? In other words, If PBS has already successfully...
-
Ddirhea replied to the thread LXC backups are failing when the container includes snaps.So this is kind of sorted now (and it wasn't any of those things). The LXC is now at least backing up. Doing the exclusion file doesn't have any effect (I suspect that needs the actual PBS setup to work) - nor does (as I found elsewhere) editing...
-
Kkingofnooby replied to the thread Proxmox installation of package failed during install.Yoo What was the outcome?
-
SteveITS replied to the thread Windows Server: Wrong time on boot after migration to PVE (XCP-ng vs. VMware).FWIW in my experience, the "Use local time for RTC" setting doesn't matter/doesn't help, but if the W32Time service is set to automatic start it should fix itself immediately after boot. YMMV... -
Jjmpfas replied to the thread confused...CEPH delivering same performance on 100G as it did on 1G test.ok - the nic labeled cluster is the proxmox cluster, not optional ceph cluster. Right now it is on 10G but moving to 100G once I am 100% sure I have the 100G working properly. later today adding cross connect cables between the two 100G switches...
-
Jjmpfas replied to the thread confused...CEPH delivering same performance on 100G as it did on 1G test.ok - the nic labeled cluster is the proxmox cluster, not optional ceph cluster. Right now it is on 10G but moving to 100G once I am 100% sure I have the 100G working properly. later today adding cross connect cables between the two 100G switches...
-
Ddcabanaw replied to the thread Import from ESXi Extremely Slow.I have not unfortunately. I have migrated most of the VMs I need with the standard import tool and have not had the time to dig into this further.
