Latest activity
-
Ccarles89 replied to the thread ceph-osd crashes with kernel 6.17.2-1-pve on Dell system.Same here, but with fully updated PBS 4.1 and enterprise repos. The server is an HP DL360 Gen10+, and the RAID controller an HP MR416i-a Gen10+. When the server hits the issue, we have to do a hard reset since some processess get stuck in D...
-
Ccarles89 reacted to jdancer's post in the thread Opt-in Linux 6.17 Kernel for Proxmox VE 9 available on test & no-subscription with
Like.
Actually had to pin 6.14.11-4 kernel on PBS instances. 6.17.2-1 was giving intermittent issues on BOSS-S1. -
MMennoMega posted the thread CD drive mount issues in windows with long ISO name in Proxmox VE: Installation and configuration.HI there, Just a reminder for the proxmox coders out there. When you mount a cd-drive ISO from the LOCAL storage with the name : 26100.2314.241105-1703.GE_RELEASE_SVC_PROD1_SERVER_X64FRE_EN-US.ISO It won't mount in windows server 2025 .. nothing...
-
Nnoidea replied to the thread Speicherverteilung (Bootdisk-Größe).Ah. Ok, diese Rechnung verstehe ich natürlich. Aber wo kommt diese Größe von 58,28GB her? Habe ich die mal selber angelegt, als ich Proxmox installiert und eingerichtet habe? Denn die Festplatte selber hat ja eine Größe von 128GB.
-
Ttbomb456 replied to the thread H330 sas controller failed after upgrading to Kernel 6.17.2-2-pve.After editing grub to have intel_iommu=pt, i am still having this issue [ 7.458995] megaraid_sas 0000:41:00.0: Ignore DCMD timeout: megasas_get_ctrl_info 5389 [ 7.459264] megaraid_sas 0000:41:00.0: Could not get controller info. Fail from...
-
Ttotalizator reacted to B.Otto's post in the thread [SOLVED] Unexpected change of fingerprint with Like.
Do you backup to a Proxmox Backup Server instance and did you change (renew) the SSL certificates of the PBS? That does change the fingeprint. Adding a PBS via fingerprint is only needed if you use a self-signed certificate. If instead you use a...
-
CCAAD replied to the thread MS-A2 Minisforum (AMD Ryzen™ 9 9955HX + Radeon™ 610M) – The “I Finally Stopped Crying” Zero-Artifact iGPU Passthrough Thread.Unfortunately, I was able to use the igpu for some gameplay, emulation and other graphical uses. The 610m indeed is inadequate and artifacts everywhere to a point where it heavily distorts the picture. Ill look at some dgpu options and will go...
-
CCris12345 replied to the thread pvestatd.pm/rebalance_lxc_containers - NUMA awareness?.It's clear that Proxmox's algorithm doesn't support EPYC CPUs well, especially those with many CCDs. I'm using a dual EPYC 7763: I also have another dual 8272CL CPU. My EPYC CPU has 2.5 times the number of cores as the 8272CL, but when running...
-
LLongQT-sea replied to the thread updated to PVE 9.0 then GPU passthrough stopped working on Windows.@adystech As long as you meet the Requirements and use legacy mode passthrough, it will work. Edit: Windows VM must use OVMF/UEFI boot.
-
SSteveITS replied to the thread SDN broken after using pve-network-interface-pinning tool.After making vmbr0 VLAN-aware on that first node, I applied the network config, then applied the SDN config, and the problem VLAN worked on that node again. The /etc/network/interfaces.d/sdn file was simplified to: #version:8 auto vnetC iface...
-
Hhandfish replied to the thread [SOLVED] No /boot after PVE 8 to 9 upgrade.Thanks @xxcite81 ! Instructions worked for me, though I couldn't mount the root partition directly: I had to use the root path and not the device (/devnvme0n1p3 for me). I used SystemRescue, as the Rescue Boot wasn't working at all for me.
-
Uuzumo replied to the thread Problem with GPU Passthrough (AMD RX 9060 XT).The RX90XX won't work on older motherboards because they lack BIOS support. I encountered the same issue with the X10SRM-TF in the past. I've seen similar reports on forums (involving cheap Chinese X99 motherboards) and have shared this...
-
Uuzumo replied to the thread Unusual setup: Proxmox with only one VM, how to maximize KVM performance without "hurting" the host?.I understand that on older CPUs, disabling vulnerability mitigations prevents performance degradation. However, I see many people disabling them on newer CPUs as well. *With Zen5, you won't notice any difference. With Zen4, you might notice a...
-
TTaz-Matt reacted to jory's post in the thread local-LVM not available after Kernel update on PVE 7 with Like.
I can confirm that increasing the timeout in /etc/udev/udev.conf also fixed this issue for me. (5 TB external USB drive)
-
Uuzumo reacted to UdoB's post in the thread Unusual setup: Proxmox with only one VM, how to maximize KVM performance without "hurting" the host? with Like.
Probably. But why? The kernel is optimized with years of development to distribute compute power in a sane manner. Usually it is plainly wrong to believe that you know it better. (Exemptions just confirm this rule.) No. If you only allow...
-
JJoshua M posted the thread Hard disk spins up every 30 minutes in Proxmox VE: Installation and configuration.I had PVE and PBS co-hosted and running fine for a few months. Yesterday, the computer locked-up and I had to restart it. After re-starting, the hard disks spin up every 30 minutes only to sleep again shortly afterwards. All installation and...
-
Eertanerbek replied to the thread Win 10 VDI w/GPU Passthru - Desktop Lag/Jitter Troubleshooting.Thank you for your feedback, after two years problem continue but seems ok with intel-hda driver..
-
Ttranxene50 replied to the thread Unusual setup: Proxmox with only one VM, how to maximize KVM performance without "hurting" the host?.Long story short (1/2): - @UdoB: many thanks for your answers, took me awhile to understand them and then agree with you - Dunning–Kruger effect gently reminded me that I was just a "noob" because yes, I am new to Proxmox - reading again (and...
-
Eertanerbek reacted to garlicknots's post in the thread Win 10 VDI w/GPU Passthru - Desktop Lag/Jitter Troubleshooting with Like.
Somehow I managed to get rid of ich9 PCIe host ports as well on one of my machines. Can't successfully recreate and don't know if it's worth doing but thought it was kind of interesting I've almost completely eliminated the stutter, but it's not...
-
Aadystech replied to the thread updated to PVE 9.0 then GPU passthrough stopped working on Windows.Tried your rom file too.. (thank you for putting in the effort by the way) args: -set device.hostpci0.bus=pci.0 -set device.hostpci0.addr=2.0 -set device.hostpci0.x-igd-opregion=on hostpci0: 0000:00:02.0,romfile=igd.rom Windows boots, but still...