Latest activity
-
Ccosine replied to the thread Adding GPU Causes NIC Card to Stop Working.100%. I am loving learning proxmox, it's a blast, but things like this, after 20 years working with VMware, show a systemic brittleness that is really alarming.
-
Mm4tt.io replied to the thread Problem with GPU Passthrough (AMD RX 9060 XT).Thank you, I think that I'm going to return it back to the seller, I was doing some tests and the system is not displaying anything when I remove the NVIDIA GPU, probably it's defective.. Or it's not compatible with my system at all.
-
Sstuartthebruce posted the thread Live migration occasionally fails with QEMU assertion failure in Proxmox VE: Networking and Firewall.Testing a new PVE9 cluster with high-speed (2x400G LACP) network connections has shown that live migration of large VMs will occasionally fail with, QEMU[949247]: kvm: ../util/bitmap.c:167: bitmap_set: Assertion `start >= 0 && nr...
-
news replied to the thread ZFS-ERROR Live-Migration: cannot create snapshot: out of space.Can you please run this for my clearness: zfs list -t snapshot,filesystem -r nvme-2tb/vm-130-disk-1 -
Wwissens-hunger replied to the thread Proxmox 8 Upgrade auf 9 Fehler im Log Fenster bei einem LXC.Hallo @Bu66as Vielen Dank und eine Erleuterung. Ja, der LXC fährt sauber herunter. Zumindest was ich sehe und beurteilen kann. Das Heist kann den „Bug“ proxmox fixen? Mein Test LXC hat diese Config: #10.10.1.11/admin arch: amd64 cores: 2...
-
news replied to the thread ZFS-ERROR Live-Migration: cannot create snapshot: out of space.please read root@pve02:~# zfs list NAME USED AVAIL REFER MOUNTPOINT nvme-2tb/vm-130-disk-1 944G 659G 436G - your zfs dataset vm-130-disk-1 use 436G and hat also 944G = 436G + X, with snapshot...
-
NNoriDev replied to the thread [SOLVED] Colors are not displayed in Proxmox's Node Shell..After conducting various tests, I found that PVE was fine. The colors were displayed correctly, and it was a configuration issue with the vim package. It's really stupid. Just type :syntax on while the vim editor is open. Also, if you have a...
-
DDraknars posted the thread Issue with setting up SecureBoot on PBS 4.1, does "proxmox-boot-tool" is a package for PBS ? in Proxmox Backup: Installation and configuration.I've recently upgraded PBS from 3.X to 4.1 using the wiki and it worked great, no problem here. Few days after that, I decided I wanted to setup Secure Boot on all my PVE Hosts and my PBS Server. I was able to set it up on PVE for all 4 of my...
-
DI noticed an issue where I was experiencing a lot of OOM errors within my LXC containers. After updating to Deb13/PVE9.x I found some of my LXC containers at 99% CPU and 99% MEM usage. Debian 13 has, by default, moved /tmp to a tmpfs. It...
-
Jj.gelissen posted the thread Remove local-lvm and add space to local? in Proxmox VE: Installation and configuration.Hi, quick question regarding the default Proxmox setup with local and local-lvm. On a productive PVE host, local (root) is quite small, while local-lvm exists but is currently unused (all VM disks are located on other storages). The idea would...
-
BBluemeus replied to the thread ZFS-ERROR Live-Migration: cannot create snapshot: out of space.Ok thanks for this nice tip. :-) But i still don't understand, why 500GB + f.e. 292GB could not be replicated with an error "out of space" when the target storage has about 1.7TB free space. What could be the cause for this? Edit: I hat a...
-
Mm4tt.io replied to the thread Problem with GPU Passthrough (AMD RX 9060 XT).Hello, thanks for the reply. I followed as well, I was taking a look on the official wiki first https://pve.proxmox.com/wiki/PCI_Passthrough but didn't find how to make it work :( The device don't even show up on the RAW device selection...
-
-
news replied to the thread ZFS-ERROR Live-Migration: cannot create snapshot: out of space.Please see the german tool check-zfs-replication # https://github.com/bashclub/check-zfs-replication then you can run checkzfs --sourceonly
-
Rr7Y2 posted the thread Firewall rules/IP-sets for NTS with chrony in Proxmox VE: Networking and Firewall.Hi, I'm trying to run a tight nftables firewall rule set where outbound traffic is only allowed to specific IPs and ports. I would like to use secure NTP aka NTS for syncing the time of my cluster. The NTS-KE servers IP addresses will be...
-
BBluemeus replied to the thread ZFS-ERROR Live-Migration: cannot create snapshot: out of space.Good evening! root@pve02:~# zfs list -t snapshot -r nvme-2tb/vm-130-disk-0 NAME USED AVAIL REFER MOUNTPOINT nvme-2tb/vm-130-disk-0@__replicate_130-0_1752879600__ 9.66G - 12.0G -...
-
NNoriDev posted the thread [SOLVED] Colors are not displayed in Proxmox's Node Shell. in Proxmox VE: Installation and configuration.Yes. This might be a stupid question, but the colors aren't displayed in the Proxmox Node Shell. It works fine, but the lack of color differentiation makes it difficult to see. I haven't modified any environment variables like .bashrc. The only...
-
-
Ffishburn24 reacted to mehmethanifi's post in the thread [SOLVED] How to Disable TOTP on Proxmox Backup Server with
Like.
Hi Guys. I solved problem. I am connected to the device via ssh. I deleted the tfa.json file under /etc/proxmox-backup/. Then I restarted the proxy backup server problem solved. -
Ggno replied to the thread How can I access data of one LXC container from an other container?.That doesn't work for me From the unprivileged container LXC-125 sudo mount -t nfs srv.domain.net:/srv/paperless /mnt From my Laptop I can access the share with the same command
-
SSteveITS reacted to Eric-Pierre's post in the thread [SOLVED] Windows Server 2022 VM installation issues with Like.
I got the same issue. On my case the Windows Server iso was corrupted during the copy process. I check it using sha256sum. sha256sum /rpool/iso_images/template/iso/en-us_windows_server_2025_updated_nov_2025_x64_dvd_2cfcca22.iso The solution was...
-
Mm4tt.io posted the thread Problem with GPU Passthrough (AMD RX 9060 XT) in Proxmox VE: Installation and configuration.Hello all, I'm having some problems while trying to passthrough the GPU to a VM, here is my IOMMU configuration and lspci, the GPU itself is the Reaper AMD Radeon™ RX 9060 XT 16GB: IOMMU: IOMMU Group 83: 03:00.0 PCI bridge [0604]...
-
