Web interface not works

C

Carlos Tadeu

New Member
Mar 10, 2016
4
0
1
40
I'm having trouble accessing via web interface and I'm not getting resolved. Can anybody help me.

root@RJVIRTUAL01:~# netstat -naut
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:43014 0.0.0.0:* LISTEN
tcp 0 0 10.75.170.8:22 10.75.174.11:58000 ESTABLISHED
tcp6 0 0 :::111 :::* LISTEN
tcp6 0 0 :::22 :::* LISTEN
tcp6 0 0 ::1:25 :::* LISTEN
tcp6 0 0 :::45730 :::* LISTEN
udp 0 0 127.0.0.1:619 0.0.0.0:*
udp 0 0 0.0.0.0:1018 0.0.0.0:*
udp 0 0 10.75.170.8:5404 0.0.0.0:*
udp 0 0 239.192.199.23:5405 0.0.0.0:*
udp 0 0 10.75.170.8:5405 0.0.0.0:*
udp 0 0 0.0.0.0:39060 0.0.0.0:*
udp 0 0 0.0.0.0:36308 0.0.0.0:*
udp 0 0 0.0.0.0:111 0.0.0.0:*
udp 0 0 10.75.170.8:123 0.0.0.0:*
udp 0 0 127.0.0.1:123 0.0.0.0:*
udp 0 0 0.0.0.0:123 0.0.0.0:*
udp6 0 0 :::53935 :::*
udp6 0 0 :::1018 :::*
udp6 0 0 :::111 :::*
udp6 0 0 fe80::222:19ff:fed6:123 :::*
udp6 0 0 fe80::222:19ff:fed6:123 :::*
udp6 0 0 ::1:123 :::*
udp6 0 0 :::123 :::*


nmap -PN0 -p8006 rjvirtual01

Starting Nmap 6.40 ( http://nmap.org ) at 2016-03-10 14:20 BRT
Nmap scan report for rjvirtual01
Host is up (0.00052s latency).
PORT STATE SERVICE
8006/tcp closed unknown

Nmap done: 1 IP address (1 host up) scanned in 0.08 seconds






pvecm status
Quorum information
------------------
Date: Thu Mar 10 14:32:38 2016
Quorum provider: corosync_votequorum
Nodes: 2
Node ID: 0x00000001
Ring ID: 3956
Quorate: Yes

Votequorum information
----------------------
Expected votes: 2
Highest expected: 2
Total votes: 2
Quorum: 2
Flags: Quorate

Membership information
----------------------
Nodeid Votes Name
0x00000001 1 10.75.170.8 (local)
0x00000002 1 10.75.170.9
 
Carlos Tadeu said:
I'm having trouble accessing via web interface and I'm not getting resolved. Can anybody help me.

root@RJVIRTUAL01:~# netstat -naut
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:43014 0.0.0.0:* LISTEN
tcp 0 0 10.75.170.8:22 10.75.174.11:58000 ESTABLISHED
tcp6 0 0 :::111 :::* LISTEN
tcp6 0 0 :::22 :::* LISTEN
tcp6 0 0 ::1:25 :::* LISTEN
tcp6 0 0 :::45730 :::* LISTEN
udp 0 0 127.0.0.1:619 0.0.0.0:*
udp 0 0 0.0.0.0:1018 0.0.0.0:*
udp 0 0 10.75.170.8:5404 0.0.0.0:*
udp 0 0 239.192.199.23:5405 0.0.0.0:*
udp 0 0 10.75.170.8:5405 0.0.0.0:*
udp 0 0 0.0.0.0:39060 0.0.0.0:*
udp 0 0 0.0.0.0:36308 0.0.0.0:*
udp 0 0 0.0.0.0:111 0.0.0.0:*
udp 0 0 10.75.170.8:123 0.0.0.0:*
udp 0 0 127.0.0.1:123 0.0.0.0:*
udp 0 0 0.0.0.0:123 0.0.0.0:*
udp6 0 0 :::53935 :::*
udp6 0 0 :::1018 :::*
udp6 0 0 :::111 :::*
udp6 0 0 fe80::222:19ff:fed6:123 :::*
udp6 0 0 fe80::222:19ff:fed6:123 :::*
udp6 0 0 ::1:123 :::*
udp6 0 0 :::123 :::*


nmap -PN0 -p8006 rjvirtual01

Starting Nmap 6.40 ( http://nmap.org ) at 2016-03-10 14:20 BRT
Nmap scan report for rjvirtual01
Host is up (0.00052s latency).
PORT STATE SERVICE
8006/tcp closed unknown

Nmap done: 1 IP address (1 host up) scanned in 0.08 seconds






pvecm status
Quorum information
------------------
Date: Thu Mar 10 14:32:38 2016
Quorum provider: corosync_votequorum
Nodes: 2
Node ID: 0x00000001
Ring ID: 3956
Quorate: Yes

Votequorum information
----------------------
Expected votes: 2
Highest expected: 2
Total votes: 2
Quorum: 2
Flags: Quorate

Membership information
----------------------
Nodeid Votes Name
0x00000001 1 10.75.170.8 (local)
0x00000002 1 10.75.170.9
Click to expand...
Hi,
what is the output of following commands?
Code: 
service pveproxy status

service pveproxy start

pveversion -v

cat /etc/hosts
Udo
 
Hi Udo , thanks for the reply follows :

service pveproxy status
● pveproxy.service
Loaded: masked (/dev/null)
Active: inactive (dead)


service pveproxy start
Failed to start pveproxy.service: Unit pveproxy.service is masked.

pveversion -v
-bash: pveversion: command not found


cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
10.75.170.8 RJVIRTUAL01.globaltexsa.com.br RJVIRTUAL01 pvelocalhost
10.75.170.9 RJVIRTUAL02.globaltexsa.com.br RJVIRTUAL02

# The following lines are desirable for IPv6 capable hosts

::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
 
Additionally, you have manually disabled the pveproxy systemd service, so it's no wonder the web interface is not available. After installing all the required pve packages ("apt-get update; apt-get dist-upgrade; apt-get install proxmox-ve"), please run "systemctl enable pveproxy.service; systemctl start pveproxy.service" if you want to enable the web interface.
 
Doctor has salvation?

systemctl enable pveproxy.service
Synchronizing state for pveproxy.service with sysvinit using update-rc.d...
Executing /usr/sbin/update-rc.d pveproxy defaults
insserv: Service pvedaemon has to be enabled to start service pveproxy
insserv: exiting now!
update-rc.d: error: insserv rejected the script header
*** Error in `systemctl': double free or corruption (fasttop): 0x00005645b41389f0 ***
Aborted


dpkg -l | grep pve
ii cgmanager 0.37-pve2 amd64 Central cgroup manager daemon
rc corosync-pve 2.3.5-1 amd64 Standards-based cluster framework (daemon and modules)
ii dmeventd 2:1.02.93-pve1 amd64 Linux Kernel Device Mapper event daemon
ii dmsetup 2:1.02.93-pve1 amd64 Linux Kernel Device Mapper userspace library
ii grub-common 2.02-pve4 amd64 GRand Unified Bootloader (common files)
ii grub-efi-amd64-bin 2.02-pve4 amd64 GRand Unified Bootloader, version 2 (EFI-AMD64 binaries)
ii grub-efi-ia32-bin 2.02-pve4 amd64 GRand Unified Bootloader, version 2 (EFI-IA32 binaries)
ii grub-pc 2.02-pve4 amd64 GRand Unified Bootloader, version 2 (PC/BIOS version)
ii grub-pc-bin 2.02-pve4 amd64 GRand Unified Bootloader, version 2 (PC/BIOS binaries)
ii grub2-common 2.02-pve4 amd64 GRand Unified Bootloader (common files for version 2)
ii libcgmanager0:amd64 0.37-pve2 amd64 Central cgroup manager daemon (client library)
rc libcorosync4-pve 2.3.5-1 amd64 Standards-based cluster framework (libraries)
ii libdevmapper-event1.02.1:amd64 2:1.02.93-pve1 amd64 Linux Kernel Device Mapper event support library
ii libdevmapper1.02.1:amd64 2:1.02.93-pve1 amd64 Linux Kernel Device Mapper userspace library
ii liblvm2app2.2:amd64 2.02.116-pve1 amd64 LVM2 application library
ii liblvm2cmd2.02:amd64 2.02.116-pve1 amd64 LVM2 command library
ii libnvpair1 0.6.5-pve4~jessie amd64 Solaris name-value library for Linux
ii libpve-common-perl 4.0-29 all Proxmox VE base library
ii libpve-storage-perl 4.0-25 all Proxmox VE storage management library
ii libuutil1 0.6.5-pve4~jessie amd64 Solaris userland utility library for Linux
ii libzfs2 0.6.5-pve4~jessie amd64 Native ZFS filesystem library for Linux
ii libzpool2 0.6.5-pve4~jessie amd64 Native ZFS pool library for Linux
ii lvm2 2.02.116-pve1 amd64 Linux Logical Volume Manager
ii lxc-pve 1.1.3-1 amd64 Linux containers usersapce tools
ii lxcfs 0.9-pve2 amd64 LXC userspace filesystem
ii novnc-pve 0.5-5 amd64 HTML5 VNC client
rc pve-cluster 4.0-22 amd64 Cluster Infrastructure for Proxmox Virtual Environment
rc pve-firewall 2.0-12 amd64 Proxmox VE Firewall
ii pve-firmware 1.1-7 all Binary firmware code for the pve-kernel
rc pve-ha-manager 1.0-9 amd64 Proxmox VE HA Manager
ii pve-kernel-4.2.2-1-pve 4.2.2-16 amd64 The Proxmox PVE Kernel Image
ii pve-libspice-server1 0.12.5-1 amd64 SPICE remote display system server library
rc pve-manager 4.0-48 amd64 The Proxmox Virtual Environment
ii pve-qemu-kvm 2.4-9 amd64 Full virtualization on x86 hardware
ii spl 0.6.5-pve1~jessie amd64 Solaris Porting Layer user-space utilities for Linux
ii zfs-initramfs 0.6.5-pve4~jessie amd64 Native ZFS root filesystem capabilities for Linux
ii zfsutils 0.6.5-pve4~jessie amd64 command-line tools to manage ZFS filesystems
 
You must log in or register to reply here.
Top Bottom