Troubles Connecting Tintri NFS to Proxmox HA GUI

[h4rm0n!0u54]

Hi all,

I have a 2x node PVE 9.2.2 environment that share storage over our core switch infrastructure. Proxmox datacenter has its firewall disabled. That shared storage is a Tintri T850 on 5.5 (upgrading to 5.6 code as we speak) code. I will emphasis that this is non-production but we do need to get it back up in a working state for our dev/testing we do.

I'm able to manually mount the nfs storage mount -t nfs -o rw,vers=3,proto=tcp 10.4.43.34:/tintri /mnt/pve/tintri


Not showing up as a drive to access though


When I try to add it through the GUI again


I can ping the host and see an active connection in the tintri when manually mounted through CLI

 

[bbgeek17]

Most likely there is an issue (network or configuration) with RPC requests. The exports are probed via "showmount" and "rpcinfo". Try these commands manually, if they fail - the PVE probes will be unsuccessful and you will not be able to manage NFS via PVE.

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox

 

[h4rm0n!0u54]

Thanks for the reply @bbgeek17. Unironically we got it working right as or shortly after you posted. I'll need to talk with my coworker before I post our solution for others.