pveversion shows not correctly installed.

T

timucin

New Member
Feb 20, 2011
12
0
1
Istanbul/Turkey
I have setup a new server and after everything ready, I've shutdown the server, carry it to datacenter and put it in the rack and turned on.

When I look at the pveversion command I see this. is this a problem? What should I do ? What went wrong? I've just changed ip's, when I first setup I've used local ip's to test localy and changed them to my public ip's when I carry the server.

server0:~# pveversion -v
pve-manager: not correctly installed (pve-manager/1.7/5470)
running kernel: 2.6.32-4-pve
qemu-server: not correctly installed
pve-firmware: not correctly installed
libpve-storage-perl: not correctly installed
vncterm: not correctly installed
vzctl: not correctly installed
vzdump: not correctly installed
vzprocps: not correctly installed
vzquota: not correctly installed

the server running very light loaded guest servers. one ubuntu 10.04 openvz container and 2 windows 2003 server and one windows 2000 server. The windows 2000 server is migrated from vmware-server and it's temporary, now runs everthing but after I carry all the services to other windows 2003 servers it'll be removed.

Now, with the current load there seems no problems. But once or twice one of the windows guests stopped. I've started it from the web interface but I think I should look for errors.

I'm using bridged ethernet, two nics, one internet side and one is for trusted internal connections between guest servers. I've used e1000 on windows and venet on container.
 
Looks OK, and what is the output of:

# dpkg-query --show -f '${PACKAGE} ${VERSION} ${STATUS}\n'

Please send it send directly to me <dietmar@proxmox.com>
 
timucin said:
Thank you for your attention.

I've send the output by email.
Click to expand...

Code: 
 :~# dpkg-query --show -f '${PACKAGE} ${VERSION} ${STATUS}\n'
  adduser  install ok installed
  apache2  install ok installed
That output contain no version field - strange. Try to run

# aptitude update

The output should look like:

Code: 
...
adduser 3.110 install ok installed
alacarte 0.11.5-1 install ok installed
alsa-base 1.0.17.dfsg-4 install ok installed
...
 
here is the results of aptitude update and aptitude safe-upgrade :

My system locale is set to Turkish, maybe that is the problem. How can I change the locale?

------
server0:~# aptitude update
İsabet http://ftp.tr.debian.org lenny Release.gpg
Gizlehttp://ftp.tr.debian.org lenny/main Translation-tr
Gizlehttp://ftp.tr.debian.org lenny/contrib Translation-tr
İsabet http://ftp.tr.debian.org lenny Release
İsabet http://security.debian.org lenny/updates Release.gpg
Gizlehttp://security.debian.org lenny/updates/main Translation-tr
Gizlehttp://security.debian.org lenny/updates/contrib Translation-tr
Gizlehttp://ftp.tr.debian.org lenny/main Packages/DiffIndex
İsabet http://download.proxmox.com lenny Release.gpg
Gizlehttp://download.proxmox.com lenny/pve Translation-tr
Gizlehttp://ftp.tr.debian.org lenny/contrib Packages/DiffIndex
İsabet http://security.debian.org lenny/updates Release
İsabet http://ftp.tr.debian.org lenny/main Packages
İsabet http://ftp.tr.debian.org lenny/contrib Packages
İsabet http://download.proxmox.com lenny Release
Gizlehttp://security.debian.org lenny/updates/main Packages/DiffIndex
Gizlehttp://security.debian.org lenny/updates/contrib Packages/DiffIndex
Gizlehttp://download.proxmox.com lenny/pve Packages/DiffIndex
İsabet http://security.debian.org lenny/updates/main Packages
Gizlehttp://download.proxmox.com lenny/pve Packages
İsabet http://security.debian.org lenny/updates/contrib Packages
İsabet http://download.proxmox.com lenny/pve Packages
Reading package lists... Done

server0:~# aptitude safe-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Geniş durum bilgisi okunuyor
Paketlerin durumu güncelleniyor... Done
Görev açıklamaları okunuyor... Done
Hiçbir paket kurulmayacak, yükseltilmeyecek ya da kaldırılmayacak.
0 paket yükseltildi, 0 yeni kuruldu, 0 kaldırıldı, 0 yükseltilmedi.
Arşivlerden 0B veri alınacak.Paketler açıldıktan sonra 0B yer kullanılacak.
Reading package lists... Done
Building dependency tree
Reading state information... Done
Geniş durum bilgisi okunuyor
Paketlerin durumu güncelleniyor... Done
Görev açıklamaları okunuyor... Done

server0:~#
--------

And after this command,
dpkg-query --show -f '${PACKAGE} ${VERSION} ${STATUS}\n'
command shows the same as the one I've sent you bu email.
 
server0:~# dpkg -l dpkg
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
||/ Name Version Description
+++-======================================-======================================-============================================================================================
ii dpkg 1.14.31 Debian package management system
server0:~#


After I enter the export LANG=C command, pveversion seems normal again.

server0:~# pveversion -v
pve-manager: 1.7-11 (pve-manager/1.7/5470)
running kernel: 2.6.32-4-pve
proxmox-ve-2.6.32: 1.7-30
pve-kernel-2.6.32-4-pve: 2.6.32-30
qemu-server: 1.1-28
pve-firmware: 1.0-10
libpve-storage-perl: 1.0-16
vncterm: 0.9-2
vzctl: 3.0.24-1pve4
vzdump: 1.2-10
vzprocps: 2.0.11-1dso2
vzquota: 3.0.11-1
pve-qemu-kvm: 0.13.0-3
ksm-control-daemon: 1.0-4
server0:~#
 
timucin said:
server0:~# dpkg -l dpkg
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
||/ Name Version Description
+++-======================================-======================================-============================================================================================
ii dpkg 1.14.31 Debian package management system
server0:~#


After I enter the export LANG=C command, pveversion seems normal again.

server0:~# pveversion -v
pve-manager: 1.7-11 (pve-manager/1.7/5470)
running kernel: 2.6.32-4-pve
proxmox-ve-2.6.32: 1.7-30
pve-kernel-2.6.32-4-pve: 2.6.32-30
qemu-server: 1.1-28
pve-firmware: 1.0-10
libpve-storage-perl: 1.0-16
vncterm: 0.9-2
vzctl: 3.0.24-1pve4
vzdump: 1.2-10
vzprocps: 2.0.11-1dso2
vzquota: 3.0.11-1
pve-qemu-kvm: 0.13.0-3
ksm-control-daemon: 1.0-4
server0:~#
Click to expand...
Hi,
have you tried
Code: 
dpkg-reconfigure locales

Udo
 
Yes.
afters I see that export LANG=C command solves my problem, I googled for how to change the default locale and use the
dpkg-reconfigure locales command to change locale to us english.

how can I enable turkish keyboard on the server console? when I boot proxmox setup cd,
there are no turkish keyboard option, there are several other languages but no Turkish.
I think the keyboard settings coming from debian and debian has turkish keyboard setting but I do not know about debian that much.


Yes, I'm using ubuntu because I can not setup a debian system properly. :)
 
You must log in or register to reply here.

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Quick Navigation

Home Get Subscription Wiki Downloads Proxmox Customer Portal About

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!
Community platform by XenForo® © 2010-2024 XenForo Ltd.
Top Bottom
Back