Hi,
i am just starting to use Proxmox and have currently a lab environment running on my laptopt using vmware player.
I have created three Proxmox Nodes and Setup the Ceph Server on them. This is already working and should be ok, since the dashboard says HEALTH_OK.
However, i am not able to connect the storage to the datacenter. I have copied the keyring, but the client is not able to connect.
The ceph-mon.0.log says:
2016-12-14 17:46:10.913807 7f4da3e22700 1 mon.0@0(leader).auth v58 client did not provide supported auth type
2016-12-14 17:46:18.446556 7f4da3e22700 1 mon.0@0(leader).auth v58 client did not provide supported auth type
2016-12-14 17:46:20.656130 7f4da3e22700 1 mon.0@0(leader).auth v58 client did not provide supported auth type
2016-12-14 17:46:28.809300 7f4da3e22700 1 mon.0@0(leader).auth v58 client did not provide supported auth type
2016-12-14 17:46:30.004415 7f4da3e22700 1 mon.0@0(leader).auth v58 client did not provide supported auth type
2016-12-14 17:46:39.348967 7f4da3e22700 1 mon.0@0(leader).auth v58 client did not provide supported auth type
2016-12-14 17:46:40.423608 7f4da3e22700 1 mon.0@0(leader).auth v58 client did not provide supported auth type
2016-12-14 17:46:48.770091 7f4da3e22700 1 mon.0@0(leader).auth v58 client did not provide supported auth type
2016-12-14 17:46:50.509559 7f4da3e22700 1 mon.0@0(leader).auth v58 client did not provide supported auth type
However, the ceph command on the command line is working:
root@pxmx1:/var/log/ceph# ceph status
cluster 209bbc0a-974e-41f2-ab4f-172551f3ff95
health HEALTH_OK
monmap e3: 3 mons at {0=10.10.10.144:6789/0,1=10.10.10.145:6789/0,2=10.10.10.146:6789/0}
election epoch 58, quorum 0,1,2 0,1,2
osdmap e171: 12 osds: 12 up, 12 in
pgmap v332: 512 pgs, 1 pools, 0 bytes data, 0 objects
469 MB used, 1138 GB / 1139 GB avail
512 active+clean
i am just starting to use Proxmox and have currently a lab environment running on my laptopt using vmware player.
I have created three Proxmox Nodes and Setup the Ceph Server on them. This is already working and should be ok, since the dashboard says HEALTH_OK.
However, i am not able to connect the storage to the datacenter. I have copied the keyring, but the client is not able to connect.
The ceph-mon.0.log says:
2016-12-14 17:46:10.913807 7f4da3e22700 1 mon.0@0(leader).auth v58 client did not provide supported auth type
2016-12-14 17:46:18.446556 7f4da3e22700 1 mon.0@0(leader).auth v58 client did not provide supported auth type
2016-12-14 17:46:20.656130 7f4da3e22700 1 mon.0@0(leader).auth v58 client did not provide supported auth type
2016-12-14 17:46:28.809300 7f4da3e22700 1 mon.0@0(leader).auth v58 client did not provide supported auth type
2016-12-14 17:46:30.004415 7f4da3e22700 1 mon.0@0(leader).auth v58 client did not provide supported auth type
2016-12-14 17:46:39.348967 7f4da3e22700 1 mon.0@0(leader).auth v58 client did not provide supported auth type
2016-12-14 17:46:40.423608 7f4da3e22700 1 mon.0@0(leader).auth v58 client did not provide supported auth type
2016-12-14 17:46:48.770091 7f4da3e22700 1 mon.0@0(leader).auth v58 client did not provide supported auth type
2016-12-14 17:46:50.509559 7f4da3e22700 1 mon.0@0(leader).auth v58 client did not provide supported auth type
However, the ceph command on the command line is working:
root@pxmx1:/var/log/ceph# ceph status
cluster 209bbc0a-974e-41f2-ab4f-172551f3ff95
health HEALTH_OK
monmap e3: 3 mons at {0=10.10.10.144:6789/0,1=10.10.10.145:6789/0,2=10.10.10.146:6789/0}
election epoch 58, quorum 0,1,2 0,1,2
osdmap e171: 12 osds: 12 up, 12 in
pgmap v332: 512 pgs, 1 pools, 0 bytes data, 0 objects
469 MB used, 1138 GB / 1139 GB avail
512 active+clean