Proxmox Web GUI not working after installing SATA Controller

vivekshivraj

New Member
Jan 11, 2022
6
0
1
27
I installed a SATA Controller and after starting up my VM, I was unable to reach the web GUI anymore. I can however still SSH into it. I am new to Proxmox so I am still learning and getting use to things. I appreciate any help.


root@shivraj:~# systemctl status pve-cluster.service
● pve-cluster.service - The Proxmox VE cluster filesystem
Loaded: loaded (/lib/systemd/system/pve-cluster.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Mon 2022-01-10 21:14:45 EST; 5s ago
Process: 4678 ExecStart=/usr/bin/pmxcfs (code=exited, status=255/EXCEPTION)
CPU: 8ms

Jan 10 21:14:45 shivraj systemd[1]: pve-cluster.service: Scheduled restart job, restart counter is at 5.
Jan 10 21:14:45 shivraj systemd[1]: Stopped The Proxmox VE cluster filesystem.
Jan 10 21:14:45 shivraj systemd[1]: pve-cluster.service: Start request repeated too quickly.
Jan 10 21:14:45 shivraj systemd[1]: pve-cluster.service: Failed with result 'exit-code'.
Jan 10 21:14:45 shivraj systemd[1]: Failed to start The Proxmox VE cluster filesystem.
.
.
.
Jan 10 21:23:06 shivraj pveproxy[5016]: /etc/pve/local/pve-ssl.key: failed to load local private key (key_file or key) at /usr/share/perl5/PVE/APIServer/AnyEvent.pm line 1904.
Jan 10 21:23:06 shivraj pveproxy[5017]: /etc/pve/local/pve-ssl.key: failed to load local private key (key_file or key) at /usr/share/perl5/PVE/APIServer/AnyEvent.pm line 1904.
.
.
.
root@shivraj:~# nano /etc/hosts
127.0.0.1 localhost.localdomain localhost
192.168.1.171 shivraj.localdomain.com shivraj shivrajlocalhost

# The following lines are desirable for IPv6 capable hosts

::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
.
.
.
root@shivraj:~# nano /etc/hostname
Shivraj
 
Hi,

Thank you for sharing the hosts file; Please edit the `/etc/hosts` file line 2 should be as the below:

Code:
192.168.1.171 shivraj.localdomain.com shivraj

EDIT: then restart the pveproxy service systemctl restart pveproxy.service
 
Last edited:
Thank you for responding. I changed the /etc/hosts file and restarted the pveproxy.service, but no luck. Sorry, I also forgot to mention that none of my VMs are running and I can't start them through the cli.

127.0.0.1 localhost.localdomain localhost
192.168.1.171 shivraj.localdomain.com shivraj
.
.
.
root@shivraj:~# qm start 103
ipcc_send_rec[1] failed: Connection refused
ipcc_send_rec[2] failed: Connection refused
ipcc_send_rec[3] failed: Connection refused
Unable to load access control list: Connection refused
 
Would like an attached file of the syslog or a copy and paste? If an attached file, do you mind sharing how to copy the file to a usb drive? Also I did check the folder and there is a bunch of this:

Jan 9 17:06:34 shivraj tgtd[15892]: tgtd: graceful_read(66) sg device 11 read failed, errno: 19
Jan 9 17:06:34 shivraj tgtd[15892]: tgtd: graceful_read(66) sg device 11 read failed, errno: 19
Jan 9 17:06:34 shivraj tgtd[15892]: tgtd: graceful_read(66) sg device 11 read failed, errno: 19
Jan 9 17:06:34 shivraj tgtd[15892]: tgtd: graceful_read(66) sg device 11 read failed, errno: 19
Jan 9 17:06:34 shivraj tgtd[15892]: tgtd: graceful_read(66) sg device 11 read failed, errno: 19
Jan 9 17:06:34 shivraj tgtd[15892]: tgtd: graceful_read(66) sg device 11 read failed, errno: 19
Jan 9 17:06:34 shivraj tgtd[15892]: tgtd: graceful_read(66) sg device 11 read failed, errno: 19
--More--(0%)

So much that it's barely moving. Also I installed the SATA controller on the 10th, not the 9th.
 
Yes, the Syslog file is better from copy & paste, if the Syslog file is too big you can upload it to e.g.: google drive
 
Ok, and so far it's a bunch of what I posted above every second, since Jan 9th so I'm not sure how long it will take to reach the end. But I will post it if I manage to get it all.
 
Ok, I got it. Kind of a lot. So I attached it as a text file.
 

Attachments

  • proxmox syslog.txt
    23.4 KB · Views: 5

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!