Proxmox VE 6.4 available

  • Like
Reactions: Taylan
All Proxmox packages will be published in the pvetest repo in the first run.

If there are no issue, packages will be moved to the no-subscription repo (within days or sometimes weeks).
 
tom said:
All Proxmox packages will be published in the pvetest repo in the first run.

If there are no issue, packages will be moved to the no-subscription repo (within days or sometimes weeks).
Click to expand...
Thanks, I'll just wait for it.

I don't know, if its appropriate here to ask, but how can I safely remove the 5.11 meta package? If I try to remove it, it tries to remove all dependancies, including "proxmox-ve"...
 
Good morning everyone, the file recovery feature is a really cool addition, but I have noticed it does not support my btrfs partition, is that correct?
 
chunchunmaru said:
Good morning everyone, the file recovery feature is a really cool addition, but I have noticed it does not support my btrfs partition, is that correct?
Click to expand...
yes. we work continuously to support more file systems in the future.
 
  • Like
Reactions: Stoiko Ivanov
Before I updated to 6.4-6, everything was working fine, but since then Proxmox boots up fine, I can start VM's and so on, but after some time, I cant access the web ui anymore and also ssh access stops working (which both works directly after powering on the machine). It is not a full crash, since the vms keep running even if I can't access the webui anymore.
 
Dschorim said:
Before I updated to 6.4-6, everything was working fine, but since then Proxmox boots up fine, I can start VM's and so on, but after some time, I cant access the web ui anymore and also ssh access stops working (which both works directly after powering on the machine). It is not a full crash, since the vms keep running even if I can't access the webui anymore.
Click to expand...
Please open a new thread and provide the journal of the PVE node since boot (`journalctl -b`) - without more information it is not really possible to find the root-cause of this - Thanks
 
I noticed after upgrading that I cannot get SMART values to load on a few servers I have, including my home server. Smartctl is working and has data, the web GUI will never load the values. It's just stuck on "Loading..."
 
poxin said:
I noticed after upgrading that I cannot get SMART values to load on a few servers I have, including my home server. Smartctl is working and has data, the web GUI will never load the values. It's just stuck on "Loading..."
Click to expand...
I'm experiencing the same thing.

Based on what the Web Dev Tools say in Chrome, Javascript is getting a TypeError for property setVisible from the proxmoxlib.js

1621520674187.png

1621520560832.png
 
Last edited:
Last edited:
spirit said:
do you have a response of the smart api call ?

https://proxmoxnode:8006/api2/json/nodes/proxmoxnode/disks/smart?disk=/dev/sdX ? (replace sdX by your drive) ,
Click to expand...
it responds with {"data":null}
running any smartctl commands against the drives from the cli works just fine however.

edit. here is some more info from the request:

:8006/api2/json/nodes/proxmoxnode/disks/smart?disk=/dev/sda:1 GET https://192.168.1.19:8006/api2/json/nodes/proxmoxnode/disks/smart?disk=/dev/sda 500 (hostname lookup 'proxmoxnode' failed - failed to get address info for: proxmoxnode: Name or service not known)

1621522156859.png
 
Last edited:
flatrick said:
it responds with {"data":null}
running any smartctl commands against the drives from the cli works just fine however.

edit. here is some more info from the request:

:8006/api2/json/nodes/proxmoxnode/disks/smart?disk=/dev/sda:1 GET https://192.168.1.19:8006/api2/json/nodes/proxmoxnode/disks/smart?disk=/dev/sda 500 (hostname lookup 'proxmoxnode' failed - failed to get address info for: proxmoxnode: Name or service not known)

View attachment 26164
Click to expand...
If I also change the name for the server (proxmoxnode in the url) to my server's correct name, it gives me the correct response:

JSON: 
{"data":{"type":"ata","attributes":[{"name":"Raw_Read_Error_Rate","fail":"-","flags":"POSR--","value":79,"id":"  1","raw":"81233592","threshold":44,"worst":64},{"flags":"PO----","fail":"-","name":"Spin_Up_Time","id":"  3","value":90,"worst":90,"threshold":0,"raw":"0"},{"flags":"-O--CK","fail":"-","name":"Start_Stop_Count","id":"  4","value":100,"threshold":20,"worst":100,"raw":"14"},{"name":"Reallocated_Sector_Ct","fail":"-","flags":"PO--CK","id":"  5","value":100,"raw":"0","threshold":10,"worst":100},{"raw":"1512536842","threshold":45,"worst":60,"name":"Seek_Error_Rate","fail":"-","flags":"POSR--","value":92,"id":"  7"},{"raw":"6639","threshold":0,"worst":93,"value":93,"id":"  9","name":"Power_On_Hours","flags":"-O--CK","fail":"-"},{"raw":"0","threshold":97,"worst":100,"id":" 10","value":100,"name":"Spin_Retry_Count","flags":"PO--C-","fail":"-"},{"worst":100,"threshold":20,"raw":"14","flags":"-O--CK","fail":"-","name":"Power_Cycle_Count","id":" 12","value":100},{"threshold":99,"worst":100,"raw":"0","value":100,"id":"184","fail":"-","flags":"-O--CK","name":"End-to-End_Error"},{"worst":100,"threshold":0,"raw":"0","id":"187","value":100,"flags":"-O--CK","fail":"-","name":"Reported_Uncorrect"},{"value":100,"id":"188","flags":"-O--CK","fail":"-","name":"Command_Timeout","worst":100,"threshold":0,"raw":"0 0 0"},{"value":100,"id":"189","fail":"-","flags":"-O-RCK","name":"High_Fly_Writes","worst":100,"threshold":0,"raw":"0"},{"fail":"-","flags":"-O---K","name":"Airflow_Temperature_Cel","value":65,"id":"190","worst":51,"threshold":40,"raw":"35 (Min/Max 20/49)"},{"threshold":0,"worst":68,"raw":"64040","id":"191","value":68,"flags":"-O--CK","fail":"-","name":"G-Sense_Error_Rate"},{"threshold":0,"worst":100,"raw":"201","id":"192","value":100,"fail":"-","flags":"-O--CK","name":"Power-Off_Retract_Count"},{"raw":"5294","worst":98,"threshold":0,"id":"193","value":98,"name":"Load_Cycle_Count","fail":"-","flags":"-O--CK"},{"name":"Temperature_Celsius","flags":"-O---K","fail":"-","id":"194","value":35,"raw":"35 (0 20 0 0 0)","worst":49,"threshold":0},{"fail":"-","flags":"-O-RC-","name":"Hardware_ECC_Recovered","id":"195","value":79,"threshold":0,"worst":64,"raw":"81233592"},{"value":100,"id":"197","flags":"-O--C-","fail":"-","name":"Current_Pending_Sector","worst":100,"threshold":0,"raw":"0"},{"id":"198","value":100,"flags":"----C-","fail":"-","name":"Offline_Uncorrectable","threshold":0,"worst":100,"raw":"0"},{"value":200,"id":"199","fail":"-","flags":"-OSRCK","name":"UDMA_CRC_Error_Count","threshold":0,"worst":200,"raw":"0"},{"threshold":0,"worst":253,"raw":"6264h+43m+40.397s","value":100,"id":"240","flags":"------","fail":"-","name":"Head_Flying_Hours"},{"value":100,"id":"241","name":"Total_LBAs_Written","flags":"------","fail":"-","raw":"16067410387","threshold":0,"worst":253},{"flags":"------","fail":"-","name":"Total_LBAs_Read","id":"242","value":100,"threshold":0,"worst":253,"raw":"142968848917"}],"health":"PASSED"}}
 
Last edited:
Hello everyone! I can't update 6.1.7 to 6.4.x , who can help with it?
What I do?

- i have no subscription and deleted `pve-enterprise.list`
- I added to /etc/apt/source.list buster latest sources

Code: 
root@proxmox:~# cat /etc/apt/sources.list
deb http://ftp.de.debian.org/debian buster main contrib
deb http://ftp.de.debian.org/debian buster-updates main contrib


# security updates
deb http://security.debian.org buster/updates main contrib

- I updated packages to latest versions
Code: 
root@proxmox:~# apt-get update && apt-get dist-upgrade
Hit:1 http://security.debian.org buster/updates InRelease
Get:2 http://ftp.de.debian.org/debian buster InRelease [121 kB]
Get:3 http://ftp.de.debian.org/debian buster-updates InRelease [51.9 kB]
Get:4 http://ftp.de.debian.org/debian buster/main amd64 Packages [7,907 kB]
Get:5 http://ftp.de.debian.org/debian buster/main Translation-en [5,969 kB]
Get:6 http://ftp.de.debian.org/debian buster/contrib amd64 Packages [50.1 kB]
Get:7 http://ftp.de.debian.org/debian buster/contrib Translation-en [44.2 kB]
Get:8 http://ftp.de.debian.org/debian buster-updates/main amd64 Packages [10.9 kB]
Get:9 http://ftp.de.debian.org/debian buster-updates/main Translation-en [7,807 B]
Fetched 14.2 MB in 10s (1,455 kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

- Reboot after that... and still 6.1.7 ... what I make wrong?
 
akondratov said:
Hello everyone! I can't update 6.1.7 to 6.4.x , who can help with it?
What I do?

- i have no subscription and deleted `pve-enterprise.list`
- I added to /etc/apt/source.list buster latest sources

# security updates
deb http://security.debian.org buster/updates main contrib[/CODE][/SPOILER]

- I updated packages to latest versions


- Reboot after that... and still 6.1.7 ... what I make wrong?
Click to expand...

How about having something like

Code: 
deb http://download.proxmox.com/debian/pve buster pve-no-subscription

somewhere like:
/etc/apt/sources.list.d/pve-no-subscription.list
 
Hi there, does an upgrade from PVE 6.2 to 6.4 need two upgrade steps or is a straight jump up OK?

Docs seem to imply that it's fine to go within the same major version - just want to double-check. :)
 
You must log in or register to reply here.

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Quick Navigation

Home Get Subscription Wiki Downloads Proxmox Customer Portal About

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!
Community platform by XenForo® © 2010-2024 XenForo Ltd.
Top Bottom