Hi,
I am running a machine with freebsd operating system on proxmox. I am doing a virtualization again inside the FreeBSD operating system. I'm doing this with cbsd. When I create a virtual machine with cbsd and open it, the machine suddenly freezes. Then it gives an internal-error error. The syslog output is below:
I am using proxmox version 7.1.8.
Here is the pveversion -v command output:
My machine's configuration file is as follows:
Additionally, nested virtualization is active on my proxmox machine. Because I'm doing a virtualization on freeBSD again.
I am running a machine with freebsd operating system on proxmox. I am doing a virtualization again inside the FreeBSD operating system. I'm doing this with cbsd. When I create a virtual machine with cbsd and open it, the machine suddenly freezes. Then it gives an internal-error error. The syslog output is below:
Bash:
Dec 28 14:45:34 pve QEMU[3003940]: KVM internal error. Suberror: 1
Dec 28 14:45:34 pve QEMU[3003940]: emulation failure
Dec 28 14:45:34 pve QEMU[3003940]: RAX=0000000000000000 RBX=0000000000000000 RCX=0000000000000000 RDX=0000000000000f00
Dec 28 14:45:34 pve QEMU[3003940]: RSI=0000000000000000 RDI=0000000000000000 RBP=0000000000000000 RSP=fffffe0099012700
Dec 28 14:45:34 pve QEMU[3003940]: R8 =0000000000000000 R9 =0000000000000000 R10=0000000000000000 R11=0000000000000000
Dec 28 14:45:34 pve QEMU[3003940]: R12=0000000000000000 R13=0000000000000000 R14=0000000000000000 R15=0000000000000000
Dec 28 14:45:34 pve QEMU[3003940]: RIP=ffffffff8249b5d9 RFL=00000046 [---Z-P-] CPL=0 II=0 A20=1 SMM=0 HLT=0
Dec 28 14:45:34 pve QEMU[3003940]: ES =003b 0000000000000000 ffffffff 00c0f300 DPL=3 DS [-WA]
Dec 28 14:45:34 pve QEMU[3003940]: CS =0020 0000000000000000 ffffffff 00a09b00 DPL=0 CS64 [-RA]
Dec 28 14:45:34 pve QEMU[3003940]: SS =0028 0000000000000000 ffffffff 00c09300 DPL=0 DS [-WA]
Dec 28 14:45:34 pve QEMU[3003940]: DS =003b 0000000000000000 ffffffff 00c0f300 DPL=3 DS [-WA]
Dec 28 14:45:34 pve QEMU[3003940]: FS =0013 0000000800b308d0 ffffffff 00c0f300 DPL=3 DS [-WA]
Dec 28 14:45:34 pve QEMU[3003940]: GS =001b ffffffff83017000 ffffffff 00c0f300 DPL=3 DS [-WA]
Dec 28 14:45:34 pve QEMU[3003940]: LDT=0000 0000000000000000 ffffffff 00c00000
Dec 28 14:45:34 pve QEMU[3003940]: TR =0048 ffffffff81f16078 00002068 00008b00 DPL=0 TSS64-busy
Dec 28 14:45:34 pve QEMU[3003940]: GDT= ffffffff81f1c878 00000067
Dec 28 14:45:34 pve QEMU[3003940]: IDT= ffffffff81f14da0 00000fff
Dec 28 14:45:34 pve QEMU[3003940]: CR0=8005003b CR2=0000000000000000 CR3=000000001ef0e64b CR4=001726e0
Dec 28 14:45:34 pve QEMU[3003940]: DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000
Dec 28 14:45:34 pve QEMU[3003940]: DR6=00000000ffff0ff0 DR7=0000000000000400
Dec 28 14:45:34 pve QEMU[3003940]: EFER=0000000000000d01
Dec 28 14:45:34 pve QEMU[3003940]: Code=50 4c 8b 67 58 4c 8b 6f 60 4c 8b 77 68 4c 8b 7f 70 48 8b 3f <0f> 01 c2 48 89 e7 b8 02 00 00 00 eb 07 b8 03 00 00 00 eb 00 41 bb 02 00 00 00 74 06 41 bbI am using proxmox version 7.1.8.
Here is the pveversion -v command output:
Bash:
root@pve ~ # pveversion -v
proxmox-ve: 7.1-1 (running kernel: 5.13.19-2-pve)
pve-manager: 7.1-8 (running version: 7.1-8/5b267f33)
pve-kernel-helper: 7.1-6
pve-kernel-5.13: 7.1-5
pve-kernel-5.13.19-2-pve: 5.13.19-4
ceph-fuse: 16.2.7
corosync: 3.1.5-pve2
criu: 3.15-1+pve-1
glusterfs-client: 9.2-1
ifupdown: residual config
ifupdown2: 3.1.0-1+pmx3
libjs-extjs: 7.0.0-1
libknet1: 1.22-pve2
libproxmox-acme-perl: 1.4.0
libproxmox-backup-qemu0: 1.2.0-1
libpve-access-control: 7.1-5
libpve-apiclient-perl: 3.2-1
libpve-common-perl: 7.0-14
libpve-guest-common-perl: 4.0-3
libpve-http-server-perl: 4.0-4
libpve-storage-perl: 7.0-15
libspice-server1: 0.14.3-2.1
lvm2: 2.03.11-2.1
lxc-pve: 4.0.11-1
lxcfs: 4.0.11-pve1
novnc-pve: 1.3.0-1
proxmox-backup-client: 2.1.2-1
proxmox-backup-file-restore: 2.1.2-1
proxmox-mini-journalreader: 1.3-1
proxmox-widget-toolkit: 3.4-4
pve-cluster: 7.1-3
pve-container: 4.1-3
pve-docs: 7.1-2
pve-edk2-firmware: 3.20210831-2
pve-firewall: 4.2-5
pve-firmware: 3.3-4
pve-ha-manager: 3.3-1
pve-i18n: 2.6-2
pve-qemu-kvm: 6.1.0-3
pve-xtermjs: 4.12.0-1
qemu-server: 7.1-4
smartmontools: 7.2-1
spiceterm: 3.2-2
swtpm: 0.7.0~rc1+2
vncterm: 1.7-1
zfsutils-linux: 2.1.1-pve3My machine's configuration file is as follows:
Bash:
root@pve ~ # cat /etc/pve/qemu-server/1056.conf
balloon: 0
boot: order=scsi0;ide2;net0
cores: 10
cpu: host
ide2: local:iso/FreeBSD-13.0-RELEASE-amd64-dvd1.iso,media=cdrom
memory: 20000
meta: creation-qemu=6.1.0,ctime=1640700711
name: xxxx
net0: virtio=02:82:61:DF:89:78,bridge=vmbr0
numa: 1
ostype: l26
parent: sifirr
scsi0: zfs-disk-pool:vm-1056-disk-0,size=500G
scsihw: virtio-scsi-pci
smbios1: uuid=fd943340-a54c-4421-8192-62a5c60dbd61
sockets: 1
vmgenid: f3d02f88-e34e-4678-bda8-5496e928033b
[sifir]
balloon: 0
boot: order=scsi0;ide2;net0
cores: 10
cpu: host
ide2: local:iso/FreeBSD-13.0-RELEASE-amd64-dvd1.iso,media=cdrom
memory: 20000
meta: creation-qemu=6.1.0,ctime=1640700711
name: xxxx
net0: virtio=02:82:61:DF:89:78,bridge=vmbr0
numa: 1
ostype: l26
scsi0: zfs-disk-pool:vm-1056-disk-0,size=500G
scsihw: virtio-scsi-pci
smbios1: uuid=fd943340-a54c-4421-8192-62a5c60dbd61
snaptime: 1640715520
sockets: 1
vmgenid: f3d02f88-e34e-4678-bda8-5496e928033b
[sifirr]
balloon: 0
boot: order=scsi0;ide2;net0
cores: 10
cpu: host
ide2: local:iso/FreeBSD-13.0-RELEASE-amd64-dvd1.iso,media=cdrom
memory: 20000
meta: creation-qemu=6.1.0,ctime=1640700711
name: xxx
net0: virtio=02:82:61:DF:89:78,bridge=vmbr0
numa: 1
ostype: l26
parent: sifir
runningcpu: host,+kvm_pv_eoi,+kvm_pv_unhalt
runningmachine: pc-i440fx-6.1+pve0
scsi0: zfs-disk-pool:vm-1056-disk-0,size=500G
scsihw: virtio-scsi-pci
smbios1: uuid=fd943340-a54c-4421-8192-62a5c60dbd61
snaptime: 1640715531
sockets: 1
vmgenid: f3d02f88-e34e-4678-bda8-5496e928033b
vmstate: zfs-disk-pool:vm-1056-state-sifirrAdditionally, nested virtualization is active on my proxmox machine. Because I'm doing a virtualization on freeBSD again.
