[SOLVED] Proxmox fresh install on x99 motherboard & xeon CPU freezes at beginning

[Blackdir]

Hello everybody
I'm a real newbie in terms of proxmox but I had good knowledge of Linux in past life.

I'm at my first install of proxmox on an x99 motherboard with Xeon E5 2670 CPU, 32GB RAM, 2 NVME, 1 hdd
Every component was tested under windows and it is working fine.

Now when I boot from USB stick with proxmox v. 6.2 installation program, it freezes after few seconds with multiple messages saying

cpu srcid #0 ha #0 channel #0 has dimms but ecc is disabled

Is it a known problem? Shall I boot with some specific parameter? (BTW how can I pass boot parameters to the kernel?)

Any hint will be very much appreciated

Thanks
blackdir

 

[Blackdir]

 

[Blackdir]

SOLVED: It was probably a matter of bad bedia / flashing error... I reflashed with balenaetcher the proxmox iso and... Same message, but the installation proceeded and I was able to complete it

My bad: sorry for the confusion

 

[C-Fu]

SOLVED: It was probably a matter of bad bedia / flashing error... I reflashed with balenaetcher the proxmox iso and... Same message, but the installation proceeded and I was able to complete it

My bad: sorry for the confusion

I'm having this error, even after trying out several usb thumbdrives, as well as with 6.2/6.3, and balena or other windows iso flashing apps. Still have no idea why

 

[grz]

I've got exactly same error to my setup:" HUANANZHI X99 T8 X99 Motherboard with Intel XEON E5 2678 V3 with 2*16G DDR3 RECC memory. anybody to help here?
thank you

 

[0bit]

I've got exactly same error to my setup:" HUANANZHI X99 T8 X99 Motherboard with Intel XEON E5 2678 V3 with 2*16G DDR3 RECC memory. anybody to help here?
thank you

try https://github.com/ventoy/Ventoy

 

[grz]

try https://github.com/ventoy/Ventoy

can you give me more info, what to do with that tool?

 

[0bit]

can you give me more info, what to do with that tool?

Ventoy is an open source tool to create bootable USB drive for ISO/WIM/IMG/VHD(x)/EFI files.
With ventoy, you don't need to format the disk over and over, you just need to copy the image files to the USB drive and boot it. You can copy many image files at a time and ventoy will give you a boot menu to select them.
x86 Legacy BIOS, IA32 UEFI, x86_64 UEFI, ARM64 UEFI and MIPS64EL UEFI are supported in the same way.
Both MBR and GPT partition style are supported in the same way.
Most type of OS supported(Windows/WinPE/Linux/Unix/ChromeOS/Vmware/Xen...) ​

 

[Izaqueaf]

Erro ao Instalar Proxmox X99 F8

Welcone to the Proxmox UE 8.2 installer initial setup


startup


mounting proc filesysten mounting sys filesystem boot


comandline: BOOT_IMAGE=/boot/linux26 ro


ramdisk_size=167?7216


ru quiet splash=silent


loading drivers: nuidiafb ahci


nume mac_hid umi 12c_1801


ehci_pci


xhci_pci


acpi_cpufreq


serio_rau psmouse


pospkr intel_cstate


apl


aesni_intel shal_ssse3 sha256_ssse3


ghash_clmulni_intel


polyval_clmulni crc32_pclmul


crot10dif_pelnul kun_intel intel_pouerc


lamp x86_pkg_temp_thermal intel_uncore_frequency intel_rapl_common

Ao chegar nessa Pc Trava.