Proxmox does not show console after booting

[cyb9x]

Hello,

I installed my proxmox on my machine a few days ago, and everything seemed to go well, but during boot it showed just a few lines, and then the display freezed. In the background, it actually works, as I have access to the WebUI console, and I can "blindly" write my username/password, and by typing "reboot" it actually reboots. But I want to have access to the console on the machine itself, not only via remote ssh.

Here are my specs:
Ryzen 9 5950x
ASUS TUF x570 PRO WIFI II
NVidia RTX 3060 x2
Kingston KSM32ED8 x4

I've tried adding "nomodeset" to /etc/default/grub, but it didn't change a thing.
I'm quite a beginner so I'd appreciate any ideas that can solve this issue.

Thanks!

 

[uka]

Did you do

sudo update-grub

after changing /etc/default/grub ?

 

[cyb9x]

Did you do

sudo update-grub

after changing /etc/default/grub ?

Yes, I did. Nothing different

 

[uka]

https://forums.developer.nvidia.com/t/black-screen-after-install-of-nvidia-driver-ubuntu/109312/16
https://forums.developer.nvidia.com...-ryzen-5900-black-screen-after-boot/167681/30

 

[cyb9x]

https://forums.developer.nvidia.com/t/black-screen-after-install-of-nvidia-driver-ubuntu/109312/16
https://forums.developer.nvidia.com...-ryzen-5900-black-screen-after-boot/167681/30

Unfortunately, this didn't work

Something I forgot to add is that I passed through my (then single) GPU to a Windows VM. And as Ryzen 5950x doesn't have integrated graphics to render the proxmox console, is this a possible reason why this happens? I also have another RTX 3060 which I wanted to pass through to another VM, but can it be used to display the console first?

I'm not sure if I understand what happens with the video output of proxmox when I don't have a dedicated gpu for it..

 

[leesteken]

Something I forgot to add is that I passed through my (then single) GPU to a Windows VM.

Did you use the work-around for passing through the boot/single GPU?

 

[cyb9x]

Did you use the work-around for passing through the boot/single GPU?

Yes, I had to use the fix_gpu_pass.sh script from that thread with crontab.

#!/bin/bash
echo 1 > /sys/bus/pci/devices/0000\:09\:00.0/remove # 0000:09:00.0 GPU in my case
echo 1 > /sys/bus/pci/rescan

Previously, in my /etc/default/grub, I had:

GRUB_CMDLINE_LINUX_DEFAULT="quiet amd_iommu=on iommu=pt nomodeset video=vesafb:off video=efifb:off"

But then I started to remove parameters, as I was trying to debug this issue. Now all all I have left is the script + this grub:

GRUB_CMDLINE_LINUX_DEFAULT="quiet amd_iommu=on"

For which the GPU is passed through beautifully, but the console is still missing..

 

[uka]

Just in case you didn't see this yet: https://www.youtube.com/watch?v=cPrOoeMxzu0

 

[luqmanr]

any updates on this? I'm on the same boat
I've disabled autostart on all my VM's, and removed any PCI passthrough I had for the VMs
But the console still doesn't show on my host

 

[sheiik]

I had a similar problem where the host shell became invisible after I did something. It probably has nothing to do with your situation though but I though I'd share anyway.

I also had a black screen after the boot process with no prompt but I could login and type commands blindly.
This happened after I wanted to try gnome-shell on the host (I only wanted to use it on demand for VNCing into guest VMs).
But then I uninstalled gnome-shell and its dependecies. The issue then started when I rebooted.
I could ssh and find no particular issue until I looked at /var/log/boot.log and the last lines showed that plymouth was trying to start.
It's a graphical boot screen process and since I removed gdm, gnome-session, etc., it couldn't display anything I guess. I removed it, rebooted and it was fixed.

TLDR : I forgot to remove plymouth.