Hello
I read the documentation and the forum but I still can not manage with the vlans.
It must be said that my English is weak.
I use proxmox 5.2 on 1 server with 4 network interfaces:
- eno1 I have a classic ip configuration that allows me to access my server (ssh and proxmox interface). It is in my server vlan, switch port in the same vlan
- eno2 - vmbr0
I configured the port side switch "trunk" and I would like to pass the ensnble vlan through this port. vlan3340 for example
I have a vm under windows that I declared in my subnet which corresponds to the vlan3340 of my server dhcp
I tried full configuration but without result, hence my request for help.
What would be the simplest solution?
thank you,
Bonjour
J'ai lu la documentation et le forum mais je n'arrive toujours pas à m'en sortir avec les vlans.
Il faut dire que mon anglais est faible.
J'utilise proxmox 5.2 sur 1 serveur avec 4 interfaces reseaux:
- eno1 j'ai une configuration ip classique qui me permet d'acceder à mon serveur (ssh et interface de proxmox). Il est dans mon vlan serveur, port du switch dans le meme vlan
- eno2 - vmbr0
j'ai configuré le port coté switch en "trunk" et j'aimerai faire passer l'ensenble des vlan par ce port. vlan3340 par exemple
J'ai une vm sous windows que j'ai declaré dans mon subnet qui correspond au vlan3340 de mon serveur dhcp
J'ai essayé plein de configuration mais sans resultat, d'ou ma demande d'aide.
Quelle serait la solution la plus simple ?
merci,
I read the documentation and the forum but I still can not manage with the vlans.
It must be said that my English is weak.
I use proxmox 5.2 on 1 server with 4 network interfaces:
- eno1 I have a classic ip configuration that allows me to access my server (ssh and proxmox interface). It is in my server vlan, switch port in the same vlan
- eno2 - vmbr0
I configured the port side switch "trunk" and I would like to pass the ensnble vlan through this port. vlan3340 for example
I have a vm under windows that I declared in my subnet which corresponds to the vlan3340 of my server dhcp
I tried full configuration but without result, hence my request for help.
What would be the simplest solution?
thank you,
Bonjour
J'ai lu la documentation et le forum mais je n'arrive toujours pas à m'en sortir avec les vlans.
Il faut dire que mon anglais est faible.
J'utilise proxmox 5.2 sur 1 serveur avec 4 interfaces reseaux:
- eno1 j'ai une configuration ip classique qui me permet d'acceder à mon serveur (ssh et interface de proxmox). Il est dans mon vlan serveur, port du switch dans le meme vlan
- eno2 - vmbr0
j'ai configuré le port coté switch en "trunk" et j'aimerai faire passer l'ensenble des vlan par ce port. vlan3340 par exemple
J'ai une vm sous windows que j'ai declaré dans mon subnet qui correspond au vlan3340 de mon serveur dhcp
J'ai essayé plein de configuration mais sans resultat, d'ou ma demande d'aide.
Quelle serait la solution la plus simple ?
merci,