[SOLVED] Proxmox 4. "No quorum" error.

pumko-adm

New Member
Apr 16, 2014
10
0
1
Hi all!
I have a few Proxmox servers in the cluster. Today, one server has dropped out of the cluster and returns an error "cluster not ready - no quorum".
Tell me, please, where and what to see, what would solve the problem?

Code:
root@R38P-01-VS3:~# pveversion -v
proxmox-ve: 4.2-64 (running kernel: 4.4.15-1-pve)
pve-manager: 4.2-18 (running version: 4.2-18/158720b9)
pve-kernel-4.4.15-1-pve: 4.4.15-60
pve-kernel-4.2.8-1-pve: 4.2.8-41
pve-kernel-4.4.16-1-pve: 4.4.16-64
lvm2: 2.02.116-pve3
corosync-pve: 2.4.0-1
libqb0: 1.0-1
pve-cluster: 4.0-44
qemu-server: 4.0-86
pve-firmware: 1.1-9
libpve-common-perl: 4.0-72
libpve-access-control: 4.0-19
libpve-storage-perl: 4.0-57
pve-libspice-server1: 0.12.8-1
vncterm: 1.2-1
pve-qemu-kvm: 2.6.1-2
pve-container: 1.0-73
pve-firewall: 2.0-29
pve-ha-manager: 1.0-33
ksm-control-daemon: 1.2-1
glusterfs-client: 3.5.2-2+deb8u2
lxc-pve: 2.0.4-1
lxcfs: 2.0.3-pve1
cgmanager: 0.39-pve1
criu: 1.6.0-1
novnc-pve: 0.5-8
fence-agents-pve: not correctly installed

Code:
root@:~# systemctl status corosync.service
● corosync.service - Corosync Cluster Engine
   Loaded: loaded (/lib/systemd/system/corosync.service; enabled)
   Active: failed (Result: timeout) since Thu 2016-09-08 18:47:00 IRKT; 12min ago
  Process: 5362 ExecStart=/usr/share/corosync/corosync start (code=killed, signal=TERM)

Sep 08 18:45:29 servername corosync[5382]: [MAIN  ] Corosync Cluster Engine ('2.4.0'): started and ready to provide service.
Sep 08 18:45:29 servername corosync[5382]: [MAIN  ] Corosync built-in features: augeas systemd pie relro bindnow
Sep 08 18:47:00 servername systemd[1]: corosync.service start operation timed out. Terminating.
Sep 08 18:47:00 servername corosync[5362]: Starting Corosync Cluster Engine (corosync):
Sep 08 18:47:00 servername systemd[1]: Failed to start Corosync Cluster Engine.
Sep 08 18:47:00 servername systemd[1]: Unit corosync.service entered failed state.
Hint: Some lines were ellipsized, use -l to show in full.
 
execute on all nodes

omping -c 10000 -i 0.001 -F -q node1ip node2ip node3ip
 
root@:~# omping -c 10000 -i 0.001 -F -q 10.38.136.161 10.38.136.162 10.38.136.164
omping: Can't find local address in arguments

UPD:
may be possible to recreate the cluster?
 
Last edited:
can you please send the output of ifconfig.
 
Code:
root@:~# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:15:17:77:6a:9c
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:872057 errors:0 dropped:0 overruns:0 frame:0
          TX packets:134368 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:177066103 (168.8 MiB)  TX bytes:40110225 (38.2 MiB)
          Interrupt:18 Memory:b8820000-b8840000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:30834 errors:0 dropped:0 overruns:0 frame:0
          TX packets:30834 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:12115140 (11.5 MiB)  TX bytes:12115140 (11.5 MiB)

vmbr0     Link encap:Ethernet  HWaddr 00:15:17:77:6a:9c
          inet addr:10.38.136.163  Bcast:10.38.139.255  Mask:255.255.252.0
          inet6 addr: fe80::215:17ff:fe77:6a9c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:852311 errors:0 dropped:35 overruns:0 frame:0
          TX packets:130934 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:160151578 (152.7 MiB)  TX bytes:39182819 (37.3 MiB)
 
Solved a problem.
Servers are not in the domain. I make a record of all the servers in the /etc/hosts - then it worked. Thank you!
 

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!