Proxmox 3.2 - dead web interface

AMVavilov · May 8, 2014

I got to work the WEB interface.

I looked log /var/log/daemon.log
May 8 10:10:31 proxmox spiceproxy [112892]: unable to open log file '/ var / log / pveproxy / access.log' - Permission denied
May 8 10:10:33 proxmox pveproxy [2863]: worker finished 112887
May 8 10:10:33 proxmox pveproxy [2863]: starting 1 worker (s)
May 8 10:10:33 proxmox pveproxy [2863]: worker started 112897

I created and set the permissions on the file /var/log/pveproxy/access.log

Thank you all for your help!

burning daylight · Jun 21, 2015

I have a very similar problem, but nothing of the mentioned in this topic or the older one helps. When I access the web interface via http://ip:8006 - I get a blank page. I tried clean the cache/cookies/etc, using "private mode" - did not help. I also tried accessing the page from a completely different computer - still got a blank page. However if I access the page from android built-in browser - the mobile version of the proxmox web interface works, until I check the "check desktop site" option in the browser - then I get blank page again. I did not find anything in the logs.

Code:

# netstat -ant | grep 8006
tcp        0      0 0.0.0.0:8006            0.0.0.0:*               LISTEN

/var/log/pveproxy/access.log:

Code:

37.201.192.30 - - [21/Jun/2015:14:59:12 +0300] "GET / HTTP/1.1" 200 575
37.201.192.30 - - [21/Jun/2015:14:59:13 +0300] "GET /pve2/css/ext-pve.css HTTP/1.1" 200 973
37.201.192.30 - - [21/Jun/2015:14:59:13 +0300] "GET /pve2/ext4/resources/css/ext-all.css HTTP/1.1" 304 -
37.201.192.30 - - [21/Jun/2015:14:59:13 +0300] "GET /pve2/ext4/locale/ext-lang-en.js HTTP/1.1" 304 -
37.201.192.30 - - [21/Jun/2015:14:59:13 +0300] "GET /pve2/ext4/ext-all-debug.js HTTP/1.1" 304 -
37.201.192.30 - - [21/Jun/2015:14:59:13 +0300] "GET /pve2/ext4/pvemanagerlib.js HTTP/1.1" 304 -
37.201.192.30 - - [21/Jun/2015:14:59:16 +0300] "GET / HTTP/1.1" 200 575
37.201.192.30 - - [21/Jun/2015:14:59:16 +0300] "GET /pve2/ext4/resources/css/ext-all.css HTTP/1.1" 304 -
37.201.192.30 - - [21/Jun/2015:14:59:16 +0300] "GET /pve2/ext4/pvemanagerlib.js HTTP/1.1" 304 -
37.201.192.30 - - [21/Jun/2015:14:59:16 +0300] "GET /pve2/ext4/locale/ext-lang-en.js HTTP/1.1" 304 -
37.201.192.30 - - [21/Jun/2015:14:59:16 +0300] "GET /pve2/css/ext-pve.css HTTP/1.1" 200 973
37.201.192.30 - - [21/Jun/2015:14:59:16 +0300] "GET /pve2/ext4/ext-all-debug.js HTTP/1.1" 304 -
37.201.192.30 - - [21/Jun/2015:14:59:17 +0300] "GET / HTTP/1.1" 200 575
37.201.192.30 - - [21/Jun/2015:14:59:17 +0300] "GET /pve2/ext4/resources/css/ext-all.css HTTP/1.1" 304 -
37.201.192.30 - - [21/Jun/2015:14:59:17 +0300] "GET /pve2/ext4/pvemanagerlib.js HTTP/1.1" 304 -
37.201.192.30 - - [21/Jun/2015:14:59:17 +0300] "GET /pve2/ext4/locale/ext-lang-en.js HTTP/1.1" 304 -
37.201.192.30 - - [21/Jun/2015:14:59:17 +0300] "GET /pve2/ext4/ext-all-debug.js HTTP/1.1" 304 -
37.201.192.30 - - [21/Jun/2015:14:59:17 +0300] "GET /pve2/css/ext-pve.css HTTP/1.1" 200 973
192.168.11.101 - - [21/Jun/2015:14:59:26 +0300] "GET / HTTP/1.1" 200 575
192.168.11.101 - - [21/Jun/2015:14:59:26 +0300] "GET /pve2/ext4/resources/css/ext-all.css HTTP/1.1" 304 -
192.168.11.101 - - [21/Jun/2015:14:59:26 +0300] "GET /pve2/css/ext-pve.css HTTP/1.1" 304 -
192.168.11.101 - - [21/Jun/2015:14:59:27 +0300] "GET /pve2/ext4/locale/ext-lang-en.js HTTP/1.1" 304 -
192.168.11.101 - - [21/Jun/2015:14:59:27 +0300] "GET /pve2/ext4/ext-all-debug.js HTTP/1.1" 304 -
192.168.11.101 - - [21/Jun/2015:14:59:27 +0300] "GET /pve2/ext4/pvemanagerlib.js HTTP/1.1" 304 -
192.168.11.101 - - [21/Jun/2015:15:36:13 +0300] "GET / HTTP/1.1" 200 575
192.168.11.101 - - [21/Jun/2015:15:36:14 +0300] "GET /pve2/ext4/resources/css/ext-all.css HTTP/1.1" 304 -
192.168.11.101 - - [21/Jun/2015:15:36:14 +0300] "GET /pve2/css/ext-pve.css HTTP/1.1" 304 -
192.168.11.101 - - [21/Jun/2015:15:36:14 +0300] "GET /pve2/ext4/pvemanagerlib.js HTTP/1.1" 304 -
192.168.11.101 - - [21/Jun/2015:15:36:14 +0300] "GET /pve2/ext4/locale/ext-lang-en.js HTTP/1.1" 304 -
192.168.11.101 - - [21/Jun/2015:15:36:14 +0300] "GET /pve2/ext4/ext-all-debug.js HTTP/1.1" 304 -
37.201.192.30 - - [21/Jun/2015:15:36:16 +0300] "GET / HTTP/1.1" 200 575
37.201.192.30 - - [21/Jun/2015:15:36:16 +0300] "GET /pve2/ext4/resources/css/ext-all.css HTTP/1.1" 304 -
37.201.192.30 - - [21/Jun/2015:15:36:16 +0300] "GET /pve2/ext4/ext-all-debug.js HTTP/1.1" 304 -
37.201.192.30 - - [21/Jun/2015:15:36:17 +0300] "GET /pve2/css/ext-pve.css HTTP/1.1" 200 973
37.201.192.30 - - [21/Jun/2015:15:36:17 +0300] "GET /pve2/ext4/locale/ext-lang-en.js HTTP/1.1" 304 -
37.201.192.30 - - [21/Jun/2015:15:36:17 +0300] "GET /pve2/ext4/pvemanagerlib.js HTTP/1.1" 304 -
37.201.192.30 - - [21/Jun/2015:15:39:04 +0300] "GET / HTTP/1.1" 200 618
37.201.192.30 - - [21/Jun/2015:15:39:05 +0300] "GET /pve2/ext4/ext-all-debug.js HTTP/1.1" 200 449707
37.201.192.30 - - [21/Jun/2015:15:39:06 +0300] "GET /favicon.ico HTTP/1.1" 200 1342
37.201.192.30 - - [21/Jun/2015:15:39:32 +0300] "GET / HTTP/1.1" 200 814
37.201.192.30 - - [21/Jun/2015:15:39:34 +0300] "GET /favicon.ico HTTP/1.1" 200 1342
37.201.192.30 - root@pam [21/Jun/2015:15:39:34 +0300] "GET /api2/extjs/version HTTP/1.1" 200 91
37.201.192.30 - root@pam [21/Jun/2015:15:39:34 +0300] "GET /api2/extjs/cluster/status HTTP/1.1" 200 136

Here is the page source of the blank page:

HTML:

<html>
  <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <meta http-equiv="X-UA-Compatible" content="IE=10">
    <title>Proxmox Virtual Environment</title>
 
    <link rel="stylesheet" type="text/css" href="/pve2/ext4/resources/css/ext-all.css" />
    <link rel="stylesheet" type="text/css" href="/pve2/css/ext-pve.css" />
<script type="text/javascript">function gettext(buf) { return buf; }</script>    <script type="text/javascript" src="/pve2/ext4/ext-all-debug.js"></script>
    <script type="text/javascript" src="/pve2/ext4/pvemanagerlib.js"></script>
    <script type="text/javascript" src="/pve2/ext4/locale/ext-lang-en.js"></script>
    <script type="text/javascript">if (typeof(PVE) === 'undefined') PVE = {};
PVE.UserName = ''
PVE.CSRFPreventionToken = 'null';
// we need this (the java applet ignores the zindex)
Ext.useShims = true;
Ext.History.fieldid = 'x-history-field';
Ext.onReady(function() { Ext.create('PVE.StdWorkspace');});
</script>
    
  </head>
  <body>
    <!-- Fields required for history management -->
    <form id="history-form" class="x-hidden">
    <input type="hidden" id="x-history-field"/>
    </form>
  </body>
</html>

burning daylight · Jun 28, 2015

I kind of solved the problem. I did not find the real cause, but removing the pve packages with "apt-get purge ..." (except the pve-kernel), and the reinstalling them back again according to "installation on debian wheezy" manual helped. You should backup and restore the VMs of course.

AveryFreeman · Mar 11, 2017

I was having this same problem in a new install of 4.4 VE and

pvecm updatecerts --force

worked for me !!

JesusM · Apr 13, 2017

i have the same problem.

pveversion -v

Can't locate PVE/RESTEnvironment.pm in @INC (you may need to install the PVE::RESTEnvironment module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.20.2 /usr/local/share/perl/5.20.2 /usr/lib/x86_64-linux-gnu/perl5/5.20 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.20 /usr/share/perl/5.20 /usr/local/lib/site_perl .) at /usr/share/perl5/PVE/RPCEnvironment.pm line 6.
BEGIN failed--compilation aborted at /usr/share/perl5/PVE/RPCEnvironment.pm line 6.
Compilation failed in require at /usr/share/perl5/PVE/API2/APT.pm line 20.
BEGIN failed--compilation aborted at /usr/share/perl5/PVE/API2/APT.pm line 20.
Compilation failed in require at /usr/bin/pveversion line 7.
BEGIN failed--compilation aborted at /usr/bin/pveversion line 7.

udo · Apr 13, 2017

JesusM said:
i have the same problem.

pveversion -v

Can't locate PVE/RESTEnvironment.pm in @INC (you may need to install the PVE::RESTEnvironment module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.20.2 /usr/local/share/perl/5.20.2 /usr/lib/x86_64-linux-gnu/perl5/5.20 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.20 /usr/share/perl/5.20 /usr/local/lib/site_perl .) at /usr/share/perl5/PVE/RPCEnvironment.pm line 6.
BEGIN failed--compilation aborted at /usr/share/perl5/PVE/RPCEnvironment.pm line 6.
Compilation failed in require at /usr/share/perl5/PVE/API2/APT.pm line 20.
BEGIN failed--compilation aborted at /usr/share/perl5/PVE/API2/APT.pm line 20.
Compilation failed in require at /usr/bin/pveversion line 7.
BEGIN failed--compilation aborted at /usr/bin/pveversion line 7.

Hi,
I don't read 24 posts to see which problem "the same problem" is... but have you tried an "apt dist-upgrade"?

Udo

JesusM · Apr 13, 2017

udo said:
Hi,
I don't read 24 posts to see which problem "the same problem" is... but have you tried an "apt dist-upgrade"?

Udo

Yes i try:
apt-get update
apt-get upgrade
apt-get dist-upgrade

udo · Apr 13, 2017

JesusM said:
Yes i try:
apt-get update
apt-get upgrade
apt-get dist-upgrade

And what is the output of

Code:

dpkg -l |egrep 'pve|proxmox'

Udo

JesusM · Apr 13, 2017

udo said:
And what is the output of

Code:

dpkg -l |egrep 'pve|proxmox'

Udo

ii cgmanager 0.39-pve1 amd64 Central cgroup manager daemon
ii corosync-pve 2.4.2-2~pve4+1 amd64 Standards-based cluster framework (daemon and modules)
ii dmeventd 2:1.02.93-pve3 amd64 Linux Kernel Device Mapper event daemon
ii dmsetup 2:1.02.93-pve3 amd64 Linux Kernel Device Mapper userspace library
ii grub-common 2.02-pve5 amd64 GRand Unified Bootloader (common files)
ii grub-efi 2.02-pve5 amd64 GRand Unified Bootloader, version 2 (dummy package)
ii grub-efi-amd64 2.02-pve5 amd64 GRand Unified Bootloader, version 2 (EFI-AMD64 version)
ii grub-efi-amd64-bin 2.02-pve5 amd64 GRand Unified Bootloader, version 2 (EFI-AMD64 binaries)
ii grub-efi-ia32-bin 2.02-pve5 amd64 GRand Unified Bootloader, version 2 (EFI-IA32 binaries)
ii grub-pc-bin 2.02-pve5 amd64 GRand Unified Bootloader, version 2 (PC/BIOS binaries)
ii grub2-common 2.02-pve5 amd64 GRand Unified Bootloader (common files for version 2)
ii libcgmanager0:amd64 0.39-pve1 amd64 Central cgroup manager daemon (client library)
ii libcorosync4-pve 2.4.2-2~pve4+1 amd64 Standards-based cluster framework (libraries)
ii libdevmapper-event1.02.1:amd64 2:1.02.93-pve3 amd64 Linux Kernel Device Mapper event support library
ii libdevmapper1.02.1:amd64 2:1.02.93-pve3 amd64 Linux Kernel Device Mapper userspace library
ii liblvm2app2.2:amd64 2.02.116-pve3 amd64 LVM2 application library
ii liblvm2cmd2.02:amd64 2.02.116-pve3 amd64 LVM2 command library
ii libnvpair1 0.6.5.7-pve10~bpo80 amd64 Solaris name-value library for Linux
ii libpve-access-control 4.0-23 amd64 Proxmox VE access control library
ii libpve-common-perl 4.0-75 all Proxmox VE base library
ii libpve-storage-perl 4.0-76 all Proxmox VE storage management library
ii libuutil1 0.6.5.7-pve10~bpo80 amd64 Solaris userland utility library for Linux
ii libzfs2 0.6.5.7-pve10~bpo80 amd64 Native ZFS filesystem library for Linux
ii libzpool2 0.6.5.7-pve10~bpo80 amd64 Native ZFS pool library for Linux
ii lvm2 2.02.116-pve3 amd64 Linux Logical Volume Manager
ii lxc-pve 2.0.7-4 amd64 Linux containers usersapce tools
ii lxcfs 2.0.6-pve1 amd64 LXC userspace filesystem
ii novnc-pve 0.5-9 amd64 HTML5 VNC client
ii proxmox-ve 4.3-66 all The Proxmox Virtual Environment
ii pve-cluster 4.0-49 amd64 Cluster Infrastructure for Proxmox Virtual Environment
ii pve-container 1.0-78 all Proxmox VE Container management tool
ii pve-docs 4.4-4 all Proxmox VE Documentation
iF pve-firewall 2.0-33 amd64 Proxmox VE Firewall
ii pve-firmware 1.1-11 all Binary firmware code for the pve-kernel
ii pve-ha-manager 1.0-40 amd64 Proxmox VE HA Manager
rc pve-kernel-4.2.6-1-pve 4.2.6-36 amd64 The Proxmox PVE Kernel Image
ii pve-kernel-4.2.8-1-pve 4.2.8-41 amd64 The Proxmox PVE Kernel Image
ii pve-kernel-4.4.15-1-pve 4.4.15-60 amd64 The Proxmox PVE Kernel Image
ii pve-kernel-4.4.19-1-pve 4.4.19-66 amd64 The Proxmox PVE Kernel Image
ii pve-libspice-server1 0.12.8-2 amd64 SPICE remote display system server library
iF pve-manager 4.3-3 amd64 The Proxmox Virtual Environment
ii pve-qemu-kvm 2.7.1-4 amd64 Full virtualization on x86 hardware
ii smartmontools 6.5+svn4324-1~pve80 amd64 control and monitor storage systems using S.M.A.R.T.
ii spl 0.6.5.9-pve8~bpo80 amd64 Solaris Porting Layer user-space utilities for Linux
ii tar 1.27.1+pve.3 amd64 GNU version of the tar archiving utility
ii zfs-initramfs 0.6.5.7-pve10~bpo80 amd64 Native ZFS root filesystem capabilities for Linux
ii zfsutils 0.6.5.7-pve10~bpo80 amd64 command-line tools to manage ZFS filesystems

udo · Apr 13, 2017

JesusM said:
ii proxmox-ve 4.3-66 all The Proxmox Virtual Environment
ii pve-kernel-4.4.19-1-pve 4.4.19-66 amd64 The Proxmox PVE Kernel Image
iF pve-manager 4.3-3 amd64 The Proxmox Virtual Environment
ii pve-qemu-kvm 2.7.1-4 amd64 Full virtualization on x86 hardware

Hi,
looks very strange - you have mixed versions.

Don't use "apt upgrade" with proxmox - dist-upgrade is the right choice.

What is the output of

Code:

apt dist-upgrade

Udo

JesusM · Apr 13, 2017

udo said:
Hi,
looks very strange - you have mixed versions.

Don't use "apt upgrade" with proxmox - dist-upgrade is the right choice.

What is the output of

Code:

apt dist-upgrade

Udo

Leyendo lista de paquetes... Hecho
Creando árbol de dependencias
Leyendo la información de estado... Hecho
Calculando la actualización... Los paquetes indicados a continuación se instalaron de forma automática y ya no son necesarios.
libcurl3 libelf1
Utilice «apt-get autoremove» para eliminarlos.
Listo
Se instalarán los siguientes paquetes NUEVOS:
libappconfig-perl libjs-extjs libnvpair1linux libpve-guest-common-perl
libpve-http-server-perl libtemplate-perl libuutil1linux libzfs2linux
libzpool2linux pve-kernel-4.4.49-1-pve zfs-zed zfsutils-linux
Se actualizarán los siguientes paquetes:
libnvpair1 libpve-common-perl libuutil1 libzfs2 libzpool2 proxmox-ve
pve-container pve-manager qemu-server zfs-initramfs zfsutils
11 actualizados, 12 nuevos se instalarán, 0 para eliminar y 0 no actualizados.
2 no instalados del todo o eliminados.
Se necesita descargar 51,5 MB de archivos.
Se utilizarán 22,9 MB de espacio de disco adicional después de esta operación.
¿Desea continuar? [S/n] s
Des:1 http://ftp.debian.org/debian/ jessie/main libappconfig-perl all 1.66-1 [77,8 kB]
Des:2 http://ftp.debian.org/debian/ jessie/main libtemplate-perl amd64 2.24-1.2+b1 [605 kB]
Des:3 http://download.proxmox.com/debian/ jessie/pve-no-subscription pve-container all 1.0-97 [89,7 kB]
Des:4 http://download.proxmox.com/debian/ jessie/pve-no-subscription qemu-server amd64 4.0-110 [145 kB]
Des:5 http://download.proxmox.com/debian/ jessie/pve-no-subscription libpve-common-perl all 4.0-94 [65,0 kB]
Des:6 http://download.proxmox.com/debian/ jessie/pve-no-subscription pve-manager amd64 4.4-13 [2.437 kB]
Des:7 http://download.proxmox.com/debian/ jessie/pve-no-subscription libpve-guest-common-perl all 1.0-2 [7.952 B]
Des:8 http://download.proxmox.com/debian/ jessie/pve-no-subscription libpve-http-server-perl all 1.0-4 [95,3 kB]
Des:9 http://download.proxmox.com/debian/ jessie/pve-no-subscription libjs-extjs all 6.0.1-1 [2.521 kB]
Des:10 http://download.proxmox.com/debian/ jessie/pve-no-subscription libnvpair1 all 0.6.5.9-pve15~bpo80 [15,6 kB]
Des:11 http://download.proxmox.com/debian/ jessie/pve-no-subscription libuutil1 all 0.6.5.9-pve15~bpo80 [15,6 kB]
Des:12 http://download.proxmox.com/debian/ jessie/pve-no-subscription libuutil1linux amd64 0.6.5.9-pve15~bpo80 [49,1 kB]
Des:13 http://download.proxmox.com/debian/ jessie/pve-no-subscription libnvpair1linux amd64 0.6.5.9-pve15~bpo80 [45,9 kB]
Des:14 http://download.proxmox.com/debian/ jessie/pve-no-subscription libzfs2 all 0.6.5.9-pve15~bpo80 [15,6 kB]
Des:15 http://download.proxmox.com/debian/ jessie/pve-no-subscription libzpool2 all 0.6.5.9-pve15~bpo80 [15,6 kB]
Des:16 http://download.proxmox.com/debian/ jessie/pve-no-subscription libzpool2linux amd64 0.6.5.9-pve15~bpo80 [404 kB]
Des:17 http://download.proxmox.com/debian/ jessie/pve-no-subscription libzfs2linux amd64 0.6.5.9-pve15~bpo80 [128 kB]
Des:18 http://download.proxmox.com/debian/ jessie/pve-no-subscription pve-kernel-4.4.49-1-pve amd64 4.4.49-86 [44,3 MB]
Des:19 http://download.proxmox.com/debian/ jessie/pve-no-subscription proxmox-ve all 4.4-86 [5.606 B]
Des:20 http://download.proxmox.com/debian/ jessie/pve-no-subscription zfsutils all 0.6.5.9-pve15~bpo80 [15,5 kB]
Des:21 http://download.proxmox.com/debian/ jessie/pve-no-subscription zfsutils-linux amd64 0.6.5.9-pve15~bpo80 [341 kB]
Des:22 http://download.proxmox.com/debian/ jessie/pve-no-subscription zfs-initramfs all 0.6.5.9-pve15~bpo80 [24,2 kB]
Des:23 http://download.proxmox.com/debian/ jessie/pve-no-subscription zfs-zed amd64 0.6.5.9-pve15~bpo80 [44,3 kB]
Descargados 51,5 MB en 1s (37,1 MB/s)
Leyendo lista de cambios... Hecho.
Preconfigurando paquetes ...
(Leyendo la base de datos ... 54719 ficheros o directorios instalados actualmente.)
Preparando para desempaquetar .../pve-container_1.0-97_all.deb ...
Desempaquetando pve-container (1.0-97) sobre (1.0-78) ...
Preparando para desempaquetar .../qemu-server_4.0-110_amd64.deb ...
Desempaquetando qemu-server (4.0-110) sobre (4.0-91) ...
Preparando para desempaquetar .../libpve-common-perl_4.0-94_all.deb ...
Desempaquetando libpve-common-perl (4.0-94) sobre (4.0-75) ...
Preparando para desempaquetar .../pve-manager_4.4-13_amd64.deb ...
Desempaquetando pve-manager (4.4-13) sobre (4.3-3) ...
dpkg: aviso: no se puede borrar el directorio antiguo `/etc/vz': El directorio no está vacío
Seleccionando el paquete libpve-guest-common-perl previamente no seleccionado.
Preparando para desempaquetar .../libpve-guest-common-perl_1.0-2_all.deb ...
Desempaquetando libpve-guest-common-perl (1.0-2) ...
Seleccionando el paquete libpve-http-server-perl previamente no seleccionado.
Preparando para desempaquetar .../libpve-http-server-perl_1.0-4_all.deb ...
Desempaquetando libpve-http-server-perl (1.0-4) ...
Seleccionando el paquete libjs-extjs previamente no seleccionado.
Preparando para desempaquetar .../libjs-extjs_6.0.1-1_all.deb ...
Desempaquetando libjs-extjs (6.0.1-1) ...
Seleccionando el paquete libappconfig-perl previamente no seleccionado.
Preparando para desempaquetar .../libappconfig-perl_1.66-1_all.deb ...
Desempaquetando libappconfig-perl (1.66-1) ...
Seleccionando el paquete libtemplate-perl previamente no seleccionado.
Preparando para desempaquetar .../libtemplate-perl_2.24-1.2+b1_amd64.deb ...
Desempaquetando libtemplate-perl (2.24-1.2+b1) ...
Preparando para desempaquetar .../libnvpair1_0.6.5.9-pve15~bpo80_all.deb ...
Desempaquetando libnvpair1 (0.6.5.9-pve15~bpo80) sobre (0.6.5.7-pve10~bpo80) ...
Preparando para desempaquetar .../libuutil1_0.6.5.9-pve15~bpo80_all.deb ...
Desempaquetando libuutil1 (0.6.5.9-pve15~bpo80) sobre (0.6.5.7-pve10~bpo80) ...
Seleccionando el paquete libuutil1linux previamente no seleccionado.
Preparando para desempaquetar .../libuutil1linux_0.6.5.9-pve15~bpo80_amd64.deb ...
Desempaquetando libuutil1linux (0.6.5.9-pve15~bpo80) ...
Seleccionando el paquete libnvpair1linux previamente no seleccionado.
Preparando para desempaquetar .../libnvpair1linux_0.6.5.9-pve15~bpo80_amd64.deb ...
Desempaquetando libnvpair1linux (0.6.5.9-pve15~bpo80) ...
Preparando para desempaquetar .../libzfs2_0.6.5.9-pve15~bpo80_all.deb ...
Desempaquetando libzfs2 (0.6.5.9-pve15~bpo80) sobre (0.6.5.7-pve10~bpo80) ...
Preparando para desempaquetar .../libzpool2_0.6.5.9-pve15~bpo80_all.deb ...
Desempaquetando libzpool2 (0.6.5.9-pve15~bpo80) sobre (0.6.5.7-pve10~bpo80) ...
Seleccionando el paquete libzpool2linux previamente no seleccionado.
Preparando para desempaquetar .../libzpool2linux_0.6.5.9-pve15~bpo80_amd64.deb ...
Desempaquetando libzpool2linux (0.6.5.9-pve15~bpo80) ...
Seleccionando el paquete libzfs2linux previamente no seleccionado.
Preparando para desempaquetar .../libzfs2linux_0.6.5.9-pve15~bpo80_amd64.deb ...
Desempaquetando libzfs2linux (0.6.5.9-pve15~bpo80) ...
Seleccionando el paquete pve-kernel-4.4.49-1-pve previamente no seleccionado.
Preparando para desempaquetar .../pve-kernel-4.4.49-1-pve_4.4.49-86_amd64.deb ...
Desempaquetando pve-kernel-4.4.49-1-pve (4.4.49-86) ...
Preparando para desempaquetar .../proxmox-ve_4.4-86_all.deb ...
Desempaquetando proxmox-ve (4.4-86) sobre (4.3-66) ...
Preparando para desempaquetar .../zfsutils_0.6.5.9-pve15~bpo80_all.deb ...
Desempaquetando zfsutils (0.6.5.9-pve15~bpo80) sobre (0.6.5.7-pve10~bpo80) ...
dpkg: aviso: no se puede borrar el directorio antiguo `/etc/sudoers.d': El directorio no está vacío
dpkg: aviso: no se puede borrar el directorio antiguo `/etc/zfs/zed.d': El directorio no está vacío
dpkg: aviso: no se puede borrar el directorio antiguo `/etc/zfs': El directorio no está vacío
Seleccionando el paquete zfsutils-linux previamente no seleccionado.
Preparando para desempaquetar .../zfsutils-linux_0.6.5.9-pve15~bpo80_amd64.deb ...
Desempaquetando zfsutils-linux (0.6.5.9-pve15~bpo80) ...
Preparando para desempaquetar .../zfs-initramfs_0.6.5.9-pve15~bpo80_all.deb ...
Desempaquetando zfs-initramfs (0.6.5.9-pve15~bpo80) sobre (0.6.5.7-pve10~bpo80) ...
Seleccionando el paquete zfs-zed previamente no seleccionado.
Preparando para desempaquetar .../zfs-zed_0.6.5.9-pve15~bpo80_amd64.deb ...
Desempaquetando zfs-zed (0.6.5.9-pve15~bpo80) ...
Procesando disparadores para systemd (215-17+deb8u6) ...
Procesando disparadores para man-db (2.7.0.2-5) ...
Procesando disparadores para initramfs-tools (0.120+deb8u2) ...
update-initramfs: Generating /boot/initrd.img-4.4.19-1-pve
W: mdadm: /etc/mdadm/mdadm.conf defines no arrays.
W: mdadm: no arrays defined in configuration file.
Configurando libpve-common-perl (4.0-94) ...
Configurando libpve-guest-common-perl (1.0-2) ...
Configurando pve-container (1.0-97) ...
Configurando pve-firewall (2.0-33) ...
Configurando qemu-server (4.0-110) ...
Configurando libpve-http-server-perl (1.0-4) ...
Configurando libjs-extjs (6.0.1-1) ...
Configurando libappconfig-perl (1.66-1) ...
Configurando libtemplate-perl (2.24-1.2+b1) ...
Configurando pve-manager (4.4-13) ...
Configurando libuutil1linux (0.6.5.9-pve15~bpo80) ...
Configurando libnvpair1linux (0.6.5.9-pve15~bpo80) ...
Configurando libnvpair1 (0.6.5.9-pve15~bpo80) ...
Configurando libuutil1 (0.6.5.9-pve15~bpo80) ...
Configurando libzpool2linux (0.6.5.9-pve15~bpo80) ...
Configurando libzfs2linux (0.6.5.9-pve15~bpo80) ...
Configurando libzfs2 (0.6.5.9-pve15~bpo80) ...
Configurando libzpool2 (0.6.5.9-pve15~bpo80) ...
Configurando pve-kernel-4.4.49-1-pve (4.4.49-86) ...
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 4.4.49-1-pve /boot/vmlinuz-4.4.49-1-pve
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.4.49-1-pve /boot/vmlinuz-4.4.49-1-pve
update-initramfs: Generating /boot/initrd.img-4.4.49-1-pve
W: mdadm: /etc/mdadm/mdadm.conf defines no arrays.
W: mdadm: no arrays defined in configuration file.
run-parts: executing /etc/kernel/postinst.d/zz-update-grub 4.4.49-1-pve /boot/vmlinuz-4.4.49-1-pve
Generando un fichero de configuración de grub...
Encontrada imagen de linux: /boot/vmlinuz-4.4.49-1-pve
Encontrada imagen de memoria inicial: /boot/initrd.img-4.4.49-1-pve
Encontrada imagen de linux: /boot/vmlinuz-4.4.19-1-pve
Encontrada imagen de memoria inicial: /boot/initrd.img-4.4.19-1-pve
Encontrada imagen de linux: /boot/vmlinuz-4.4.15-1-pve
Encontrada imagen de memoria inicial: /boot/initrd.img-4.4.15-1-pve
Encontrada imagen de linux: /boot/vmlinuz-4.2.8-1-pve
Encontrada imagen de memoria inicial: /boot/initrd.img-4.2.8-1-pve
Found memtest86+ image: /boot/memtest86+.bin
Found memtest86+ multiboot image: /boot/memtest86+_multiboot.bin
hecho
Configurando proxmox-ve (4.4-86) ...
Configurando zfsutils-linux (0.6.5.9-pve15~bpo80) ...
Instalando una nueva versión del fichero de configuración /etc/sudoers.d/zfs ...
Instalando una nueva versión del fichero de configuración /etc/zfs/zfs-functions ...
Configurando zfsutils (0.6.5.9-pve15~bpo80) ...
Configurando zfs-initramfs (0.6.5.9-pve15~bpo80) ...
Configurando zfs-zed (0.6.5.9-pve15~bpo80) ...
Instalando una nueva versión del fichero de configuración /etc/zfs/zed.d/zed.rc ...
Procesando disparadores para systemd (215-17+deb8u6) ...
Procesando disparadores para libc-bin (2.19-18+deb8u7) ...
Procesando disparadores para initramfs-tools (0.120+deb8u2) ...
update-initramfs: Generating /boot/initrd.img-4.4.49-1-pve
W: mdadm: /etc/mdadm/mdadm.conf defines no arrays.
W: mdadm: no arrays defined in configuration file.
W: Duplicate sources.list entry http://download.proxmox.com/debian/ jessie/pve-no-subscription amd64 Packages (/var/lib/apt/lists/download.proxmox.com_debian_dists_jessie_pve-no-subscription_binary-amd64_Packages)
W: Tal vez deba ejecutar «apt-get update» para corregir estos problemas

udo · Apr 13, 2017

Hi,
my spain isn't good enough ;-)
But you have defined the pve-no-subscription repo twice.

Does the node work now?

Udo

JesusM · Apr 13, 2017

udo said:
Hi,
my spain isn't good enough ;-)
But you have defined the pve-no-subscription repo twice.

Does the node work now?

Udo

The node work, but the interface don't work.
Sorry for the lenguage, the server is on spanish.

cat /etc/apt/sources.list

deb http://ftp.debian.org/debian jessie main contrib

# PVE pve-no-subscription repository provided by proxmox.com, NOT recommended for production use
deb http://download.proxmox.com/debian jessie pve-no-subscription

# security updates
deb http://security.debian.org jessie/updates main contrib

udo · Apr 13, 2017

JesusM said:
The node work, but the interface don't work.
Sorry for the lenguage, the server is on spanish.

do an

Code:

service pveproxy restart

and clear your browser-cache

cat /etc/apt/sources.list

deb http://ftp.debian.org/debian jessie main contrib

# PVE pve-no-subscription repository provided by proxmox.com, NOT recommended for production use
deb http://download.proxmox.com/debian jessie pve-no-subscription

# security updates
deb http://security.debian.org jessie/updates main contrib

you must have an additional file inside /etc/apt/sources.d/ where pve-no-subscription is defined.

Udo

JesusM · Apr 13, 2017

udo said:
do an

Code:

service pveproxy restart

and clear your browser-cache

you must have an additional file inside /etc/apt/sources.d/ where pve-no-subscription is defined.

Udo

Done fisrt and second.

file:
deb http://download.proxmox.com/debian jessie pve-no-subscription

JesusM · Apr 13, 2017

@udo
Other question sir,
i want to create cloud vps and searching in google i see HA
is this?
what need?
For example 2 or 3 same?
If u can put guide,links data..

Thanks

udo · Apr 14, 2017

JesusM said:
@udo
Other question sir,
i want to create cloud vps and searching in google i see HA
is this?
what need?
For example 2 or 3 same?
If u can put guide,links data..

Thanks

Hi,
open an new thread for an new questions please.

Udo

Search

Search

Proxmox 3.2 - dead web interface

AMVavilov

New Member

burning daylight

Renowned Member

burning daylight

Renowned Member

AveryFreeman

Active Member

JesusM

Member

udo

Distinguished Member

JesusM

Member

udo

Distinguished Member

JesusM

Member

udo

Distinguished Member

JesusM

Member

udo

Distinguished Member

JesusM

Member

udo

Distinguished Member

JesusM

Member

JesusM

Member

udo

Distinguished Member