Proxmox 2 Windows 2003 Server Probs Please Help!!!

H

hpk

New Member
Apr 3, 2012
19
0
1
Hello i have worked with Proxmox 1.9 and now with 2.0 with Linux VM - they worked great!!

But now i want to use a Win 2003 Server, installing was not great but its ok (took very loong time to install)!!

The Hardware is a HP ML 380 with 16GB Ram an 2 Xeon Quadcore CPUs!

The Installation tooks 2 Hours!! I have configured the HDD and Network with Virtio!

Now he tooks about 10 min to start Win2003 (from Grub to Win Logon)??

Is this normal?? When he ist start up the working tempo looks normal but for this machine he must go very fast arent it ??

What went wrong??

The networks eth0 and eth1 have i bond with 802.3ad, but when i test and disconnect a network card it is ok, but when i connect the card after i get a loopback on both devices??

Sorry for my bad englisch :-)

Please help

mfg

bye

hpk
 
post the output of 'pveversion -v'.

also the details about your VM (VMID.conf file).
 
tom said:
post the output of 'pveversion -v'.

also the details about your VM (VMID.conf file).
Click to expand...

Here it is:

pveversion -v :

pve-manager: 2.0-54 (pve-manager/2.0/4b59ea39)
running kernel: 2.6.32-10-pve
proxmox-ve-2.6.32: 2.0-63
pve-kernel-2.6.32-10-pve: 2.6.32-63
pve-kernel-2.6.32-6-pve: 2.6.32-55
lvm2: 2.02.88-2pve2
clvm: 2.02.88-2pve2
corosync-pve: 1.4.1-1
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.8-3
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.7-2
pve-cluster: 1.0-26
qemu-server: 2.0-33
pve-firmware: 1.0-15
libpve-common-perl: 1.0-23
libpve-access-control: 1.0-17
libpve-storage-perl: 2.0-16
vncterm: 1.0-2
vzctl: 3.0.30-2pve2
vzprocps: 2.0.11-2
vzquota: 3.0.12-3
pve-qemu-kvm: 1.0-8
ksm-control-daemon: 1.1-1

VMID.conf :

boot: dcn
bootdisk: ide0
cores: 2
ide2: Nfs_Share:iso/virtio-win-0.1-22.iso,media=cdrom
memory: 4096
name: WinServer2003
net0: virtio=F6:D1:70:26:2B:53,bridge=vmbr0
ostype: wxp
sockets: 2
virtio0: VM:105/vm-105-disk-1.raw



Thanks

bye

hpk
 
hpk said:
Here it is:

pveversion -v :

pve-manager: 2.0-54 (pve-manager/2.0/4b59ea39)
running kernel: 2.6.32-10-pve
proxmox-ve-2.6.32: 2.0-63
pve-kernel-2.6.32-10-pve: 2.6.32-63
pve-kernel-2.6.32-6-pve: 2.6.32-55
lvm2: 2.02.88-2pve2
clvm: 2.02.88-2pve2
corosync-pve: 1.4.1-1
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.8-3
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.7-2
pve-cluster: 1.0-26
qemu-server: 2.0-33
pve-firmware: 1.0-15
libpve-common-perl: 1.0-23
libpve-access-control: 1.0-17
libpve-storage-perl: 2.0-16
vncterm: 1.0-2
vzctl: 3.0.30-2pve2
vzprocps: 2.0.11-2
vzquota: 3.0.12-3
pve-qemu-kvm: 1.0-8
ksm-control-daemon: 1.1-1
Click to expand...


hpk said:
VMID.conf :

boot: dcn
bootdisk: ide0
cores: 2
ide2: Nfs_Share:iso/virtio-win-0.1-22.iso,media=cdrom
memory: 4096
name: WinServer2003
net0: virtio=F6:D1:70:26:2B:53,bridge=vmbr0
ostype: wxp
sockets: 2
virtio0: VM:105/vm-105-disk-1.raw



Thanks

bye

hpk
Click to expand...

are you sure? you configured as boot disk "ide0" but there is no ide0 in your config.

check the boot order via GUI. rest looks ok.
 
tom said:
are you sure? you configured as boot disk "ide0" but there is no ide0 in your config.

check the boot order via GUI. rest looks ok.
Click to expand...

Hello sorry i have print the old one - here the rigth one - :

boot: cd
bootdisk: virtio0
cores: 4
ide2: cdrom,media=cdrom
memory: 4096
name: WinServer2003
net0: virtio=F6:D1:70:26:2B:53,bridge=vmbr0
onboot: 1
ostype: wxp
sockets: 2
virtio0: local:100/vm-100-disk-1.raw
virtio1: Daten:100/vm-100-disk-1.raw

Thanks

bye

hpk
 
looks ok now, installing should just take a few minutes, a reboot about 20 seconds.

post the result of 'pveperf' (run this on the proxmox ve host).
 
tom said:
looks ok now, installing should just take a few minutes, a reboot about 20 seconds.

post the result of 'pveperf' (run this on the proxmox ve host).
Click to expand...

Thanks for your Answer,

here the Results from pveperf :

CPU BOGOMIPS: 34120.94
REGEX/SECOND: 862767
HD SIZE: 94.49 GB (/dev/mapper/pve-root)
BUFFERED READS: 253.06 MB/sec
AVERAGE SEEK TIME: 10.71 ms
FSYNCS/SECOND: 2086.49
DMS EXT: 94.57 ms
DMS INT: 98.08 ms (****.local)

Thanks

bye

hpk
 
looks also fine. so far I do not see why your box is so slow here.
 
try with one cpu (1 socket, 1 core).
 
Hello I have tried with 1cpu and 1core, now it starts in 1 min. Great better, but why is this??

Have you an idea with the networkcard (bonding)??

Thanks

Bye

Hpk
 
udo said:
Hi,
i think not that's the problem, but do you have HT enabled in the BIOS? Does the same happens without HyperThreading?

Udo
Click to expand...

Hello, yes the same happens without HyperThreading!

Thanks

bye

hpk
 
Hi, which version of win2003 ?

SP2 ? R2 SP2 ? SP1 ? 32 bit or 64 bit ?

If you boot fast with 1 cpu, this can be an acpi problem, depends of windows version, this can be buggy/slow.(mainly on 32bits windows)
 
Last edited:
spirit said:
Hi, which version of win2003 ?

SP2 ? R2 SP2 ? SP1 ? 32 bit or 64 bit ?

If you boot fast with 1 cpu, this can be an acpi problem, depends of windows version, this can be buggy/slow.(mainly on 32bits windows)
Click to expand...

Hello it is Server 2003 SP2 32 Bit!!

Thanks

Bye

Hpk
 
Did you have make the installation of windows with more than 1 processor ?

I have a running win2003 R2 SP2 running without problem (but R2)

Could you very your ACPI version in windows ?

here mine:

Capture du 2012-04-05 13:22:40.png
 
Sorry for my late reply. I have the same ACPI Version.

I have now set to 1 Cpu - now i have no Freeze more.

But how can this be - i need Multiprozessors.

Please help.

Thanks

Bye

hpk
 
You must log in or register to reply here.
Top Bottom