Problem with a Cisco UCS server

[Rafael Álvarez]

Hi,

I am installing Proxmox in a Cisco UCS C220 server and have a problem with a VIC card (UCS VIC 1225T model). That card allows create multiple virtual network cards, after installing Proxmox Debian detects the element and identifies the driver but it´s not shown as a network card, here is the log:

kernel: [ 2.268173] enic 0000:13:00.0: vNIC MAC addr 58:97:bd:46:5e:04 wq/rq 256/512 mtu 1500
kernel: [ 2.268176] enic 0000:13:00.0: vNIC csum tx/rx yes/yes tso/lro yes/yes rss yes intr mode any type min timer 125 usec loopback tag 0x0000
kernel: [ 2.268178] enic 0000:13:00.0: vNIC resources avail: wq 1 rq 4 cq 5 intr 8
kernel: [ 2.268295] enic 0000:13:00.0: vNIC resources used: wq 1 rq 4 cq 5 intr 7 intr mode MSI-X
kernel: [ 2.277127] enic 0000:14:00.0: vNIC MAC addr 58:97:bd:46:5e:05 wq/rq 256/512 mtu 1500
kernel: [ 2.277129] enic 0000:14:00.0: vNIC csum tx/rx yes/yes tso/lro yes/yes rss yes intr mode any type min timer 125 usec loopback tag 0x0000
kernel: [ 2.277131] enic 0000:14:00.0: vNIC resources avail: wq 1 rq 4 cq 5 intr 8
kernel: [ 2.277212] enic 0000:14:00.0: vNIC resources used: wq 1 rq 4 cq 5 intr 7 intr mode MSI-X

We don´t get any eth* device. I think this is a Debian issue but may be you can help me.

Thanks!

 

[tom]

Which Proxmox VE install ISO do you use, already latest 4.2?

 

[Rafael Álvarez]

We are using 4.1. We can try the last version.

 

[Rafael Álvarez]

We have installed the latest version with the same result.

 

[WiFivomFranMan]

Did you get this to work? I just installed ProxMox on a 220 also and I can't access it.