Hi, all!
I have the problem with PCIe Passthrough to my Windows 10 VM via Proxmox.
I tried to passthrough this device (audio card):
VM see the device, but when it starts using it the hosts system crashes down. I get 0.5-1.0 second audio from the VM and the all system restarts.
My config is:
- AMD Ryzen 5 3350G with Radeon Vega Graphics
- Gigabyte X570 UD (also try is with Gigabyte B450M DS3H V2)
Kernel Version: Linux 5.4.73-1-pve
PVE: pve-manager/6.3-2/22f57405
Host configurated with:
- GRUB_CMDLINE_LINUX_DEFAULT="quiet amd_iommu=on pcie_acs_override=downstream"
- "blacklist snd_cmipci" at /etc/modprobe.d/blacklist.conf
- SVM & IOMMU are enabled in BIOS
- And modules ( vfio, vfio_iommu_type1, vfio_pci, vfio_virqfd) at /etc/modules
How can I fix this issue?
I have the problem with PCIe Passthrough to my Windows 10 VM via Proxmox.
I tried to passthrough this device (audio card):
Bash:
02:00.0 Multimedia audio controller: C-Media Electronics Inc CMI8738/CMI8768 PCI Audio (rev 10)
Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device
Flags: stepping, medium devsel, IRQ 255
I/O ports at f000 [disabled] [size=256]
Capabilities: [c0] Power Management version 2
Kernel modules: snd_cmipci
VM see the device, but when it starts using it the hosts system crashes down. I get 0.5-1.0 second audio from the VM and the all system restarts.
My config is:
- AMD Ryzen 5 3350G with Radeon Vega Graphics
- Gigabyte X570 UD (also try is with Gigabyte B450M DS3H V2)
Kernel Version: Linux 5.4.73-1-pve
PVE: pve-manager/6.3-2/22f57405
Host configurated with:
- GRUB_CMDLINE_LINUX_DEFAULT="quiet amd_iommu=on pcie_acs_override=downstream"
- "blacklist snd_cmipci" at /etc/modprobe.d/blacklist.conf
- SVM & IOMMU are enabled in BIOS
- And modules ( vfio, vfio_iommu_type1, vfio_pci, vfio_virqfd) at /etc/modules
How can I fix this issue?
Last edited: