[SOLVED] No WEB GUI access to fresh instalation

J

jameswrz

New Member
Nov 25, 2022
5
0
1
Dear All - Please support.
I'm all over similar threads without any luck/success.

Fresh miniPC beeline INTEL 5905/ 16GB RAM / 256GBm.2SATA / LAN,WiFi

I have instaled 7.3 then 7.1 now 6.4, all had/have same issue - no respone over WWW https://****:8006/

The latest instal without attempt of fixing, with installation issue resolved by: https://forum.proxmox.com/threads/installer-failure-installation-aborted-unable-to-continue.88460/

disconected WiFI module from motherboard.

ISSUE: PING - ok, SSH access - OK, web browser does not load the WEB UI
It is checking the page, it reads the page title, and stayss blank...
// see screen1.png

checked on 2 different IP assigned, from 2 different PC's (WIN 10 and WIN 11), chrome, edge, IE, cach clearing, restarting etc...

I have now clean instalation with IP of 192.168.2.5
DHCP 192.168.2.10 - 192.168.2.100
static device - one in network 192.168.2.2

CHECKS:
Code: 
/etc/hosts
/etc/hostname
screen2.png

Code: 
/etc/network/interfaces
systemctl status pve-cluster.service
screen3.png
Code: 
BASH

root@pve:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: enp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vmbr0 state UP group default qlen 1000
    link/ether 7c:83:34:b5:09:b2 brd ff:ff:ff:ff:ff:ff
3: wlp1s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether ec:63:d7:f2:0c:79 brd ff:ff:ff:ff:ff:ff
4: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether 7c:83:34:b5:09:b2 brd ff:ff:ff:ff:ff:ff
    inet 192.168.2.5/24 brd 192.168.2.255 scope global vmbr0
       valid_lft forever preferred_lft forever
    inet6 fe80::7e83:34ff:feb5:9b2/64 scope link
       valid_lft forever preferred_lft forever

PLEASE - help me find what is wrong.
 

Attachments

  • screen1.png
    screen1.png
    50.9 KB · Views: 43
  • screen2.png
    screen2.png
    88 KB · Views: 42
  • screen3.png
    screen3.png
    59.8 KB · Views: 42
Last edited:
The warning icon and the horizon line through htttps makes me think that your browser does not accept the self-signed certificate of the default Proxmox installation. Maybe you can add a security exception or change some other setting in your browser or try another browser like Firefox?
 
thanks for the reply, but I have already tried Chrome / Edge / Internet Explorer.
I also did Firefox. - same issue - see screen.
:(
 

Attachments

  • screen4.png
    screen4.png
    20.1 KB · Views: 28
Code: 
BASH


root@pve:~# curl -ks https://localhost:8006
<!DOCTYPE html>
<html>
  <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <meta http-equiv="X-UA-Compatible" content="IE=edge">
    <meta name="viewport" content="width=device-width, initial-scale=1, maximum-                                                                                                            scale=1, user-scalable=no">
    <title>pve - Proxmox Virtual Environment</title>
    <link rel="icon" sizes="128x128" href="/pve2/images/logo-128.png" />
    <link rel="apple-touch-icon" sizes="128x128" href="/pve2/images/logo-128.png                                                                                                            " />
    <link rel="stylesheet" type="text/css" href="/pve2/ext6/theme-crisp/resource                                                                                                            s/theme-crisp-all.css" />
    <link rel="stylesheet" type="text/css" href="/pve2/ext6/crisp/resources/char                                                                                                            ts-all.css" />
    <link rel="stylesheet" type="text/css" href="/pve2/fa/css/font-awesome.css"                                                                                                             />
    <link rel="stylesheet" type="text/css" href="/pve2/css/ext6-pve.css?ver=6.4-                                                                                                            4" />
    <link rel="stylesheet" type="text/css" href="/pwt/css/ext6-pmx.css?ver=2.5-3                                                                                                            " />

    <script type='text/javascript'>function gettext(buf) { return buf; }</script                                                                                                            >

    <script type="text/javascript" src="/pve2/ext6/ext-all.js"></script>
    <script type="text/javascript" src="/pve2/ext6/charts.js"></script>

    <script type="text/javascript" src="/pve2/js/u2f-api.js"></script>
    <script type="text/javascript" src="/pve2/js/qrcode.min.js"></script>
    <script type="text/javascript">
    Proxmox = {
        Setup: { auth_cookie_name: 'PVEAuthCookie' },
        defaultLang: 'en',
        UserName: '',
        CSRFPreventionToken: 'null'
    };
    </script>
    <script type="text/javascript" src="/proxmoxlib.js?ver=2.5-3"></script>
    <script type="text/javascript" src="/pve2/js/pvemanagerlib.js?ver=6.4-4"></s                                                                                                            cript>
    <script type="text/javascript" src="/pve2/ext6/locale/locale-en.js"></script                                                                                                            >

    <script type="text/javascript">
    if (typeof(PVE) === 'undefined') PVE = {};
    Ext.History.fieldid = 'x-history-field';
    Ext.onReady(function() { Ext.create('PVE.StdWorkspace');});
    </script>

  </head>
  <body>
    <!-- Fields required for history management -->
    <form id="history-form" class="x-hidden">
    <input type="hidden" id="x-history-field"/>
    </form>
  </body>
</html>
 
Amazingly, easiest idea came to my mind, that I checked everyting, switched browsers PC, etc...
but never changed the place where the PVE was connected.

Once I tried SSH the command above, I waited long time on putty - which got me thinking...

Ethernet Cable.

I'm speachless - new patchcord unpacked for this device - factory fresh - see the screen.
4 out of 8 lines - how is it even possible :O

Thanks for suggestions anyway.
 

Attachments

  • IMG_20221126_173134.jpg
    IMG_20221126_173134.jpg
    325.5 KB · Views: 40
You must log in or register to reply here.

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Quick Navigation

Home Get Subscription Wiki Downloads Proxmox Customer Portal About

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!
Community platform by XenForo® © 2010-2024 XenForo Ltd.
Top Bottom
Back