No Container Templates on 4.1

MikeP · Feb 14, 2016

I just installed 4.0 on a new test/dev 2-node cluster, then found out 4.1 was out, upgraded to 4.1 using the pve-no-subscription repo.

apt-get update && apt-get dist-upgrade work fine and have been done with no errors.
pveam update runs and log is below.
There are no container templates listed in the gui and no files in /var/lib/vz/template

I have a mounted SMB share with some other templates that are seen in other Proxmox, but not here.
What did I screw up? I've barely done anything with this fresh install of these two machines and clustered them.
I installed Webmin, created a ZFS pool, mounted SMB share, updated, upgraded, and that's it.

apt-get update && apt-get dist-upgrade

Hit http://security.debian.org jessie/updates InRelease

Hit http://security.debian.org jessie/updates/main amd64 Packages

Ign http://ftp.debian.org jessie InRelease

Ign http://download.proxmox.com jessie InRelease

Hit http://security.debian.org jessie/updates/contrib amd64 Packages

Hit http://ftp.debian.org jessie Release.gpg

Hit http://download.proxmox.com jessie Release.gpg

Hit http://security.debian.org jessie/updates/contrib Translation-en

Hit http://ftp.debian.org jessie Release

Hit http://download.proxmox.com jessie Release

Hit http://security.debian.org jessie/updates/main Translation-en

Hit http://ftp.debian.org jessie/main amd64 Packages

Hit http://download.proxmox.com jessie/pve-no-subscription amd64 Packages

Hit http://ftp.debian.org jessie/contrib amd64 Packages

Hit http://ftp.debian.org jessie/contrib Translation-en

Hit http://ftp.debian.org jessie/main Translation-en

Ign http://download.proxmox.com jessie/pve-no-subscription Translation-en_US

Ign http://download.proxmox.com jessie/pve-no-subscription Translation-en

Reading package lists... Done

Reading package lists... Done

Building dependency tree

Reading state information... Done

Calculating upgrade... Done

0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

Feb 13 20:57:55 starting update

[GNUPG:] IMPORT_OK 0 9ABD7E02AD243AD3C2FBBCCCB0C1CC225CAC72FE

[GNUPG:] IMPORT_RES 1 0 0 0 1 0 0 0 0 0 0 0 0 0

[GNUPG:] IMPORT_OK 0 694CFF26795A29BAE07B4EB585C25E95A16EB94D

[GNUPG:] IMPORT_RES 1 0 0 0 1 0 0 0 0 0 0 0 0 0

Feb 13 20:57:55 start download http://download.proxmox.com/images/aplinfo.dat.asc

Feb 13 20:57:56 download finished: 200 OK

Feb 13 20:57:56 start download http://download.proxmox.com/images/aplinfo.dat.gz

Feb 13 20:57:56 download finished: 200 OK

Feb 13 20:57:56 gpg: Signature made Sat 06 Feb 2016 12:19:17 PM EST using DSA key ID 5CAC72FE

Feb 13 20:57:56 [GNUPG:] SIG_ID ljr8Po+TS4JY8P2wP2aq/LG1p1w 2016-02-06 1454779157

Feb 13 20:57:56 [GNUPG:] GOODSIG B0C1CC225CAC72FE Proxmox Support Team <support@proxmox.com>

Feb 13 20:57:56 gpg: Good signature from "Proxmox Support Team <support@proxmox.com>"

Feb 13 20:57:56 [GNUPG:] VALIDSIG 9ABD7E02AD243AD3C2FBBCCCB0C1CC225CAC72FE 2016-02-06 1454779157 0

4 0 17 2 00 9ABD7E02AD243AD3C2FBBCCCB0C1CC225CAC72FE

Feb 13 20:57:56 signature valid: 9ABD7E02AD243AD3C2FBBCCCB0C1CC225CAC72FE

Feb 13 20:57:56 update sucessful

Feb 13 20:57:56 start download http://releases.turnkeylinux.org/pve/aplinfo.dat.asc

Feb 13 20:57:56 download finished: 200 OK

Feb 13 20:57:56 start download http://releases.turnkeylinux.org/pve/aplinfo.dat.gz

Feb 13 20:57:56 download finished: 200 OK

Feb 13 20:57:56 gpg: Signature made Tue 01 Dec 2015 06:21:23 AM EST using RSA key ID A16EB94D

Feb 13 20:57:56 [GNUPG:] SIG_ID OO9jiArdi94avF95XPypKMd228U 2015-12-01 1448968883

Feb 13 20:57:56 [GNUPG:] GOODSIG 85C25E95A16EB94D Turnkey Linux Release Key <release@turnkeylinux.

com>

Feb 13 20:57:56 gpg: Good signature from "Turnkey Linux Release Key <release@turnkeylinux.com>"

Feb 13 20:57:56 [GNUPG:] VALIDSIG 694CFF26795A29BAE07B4EB585C25E95A16EB94D 2015-12-01 1448968883 0

4 0 1 2 00 694CFF26795A29BAE07B4EB585C25E95A16EB94D

Feb 13 20:57:56 signature valid: 694CFF26795A29BAE07B4EB585C25E95A16EB94D

Feb 13 20:57:56 update sucessful

pveversion -v

proxmox-ve: 4.1-37 (running kernel: 4.2.8-1-pve)

pve-manager: 4.1-10 (running version: 4.1-10/de913a46)

pve-kernel-4.2.8-1-pve: 4.2.8-37

pve-kernel-4.2.2-1-pve: 4.2.2-16

lvm2: 2.02.116-pve2

corosync-pve: 2.3.5-2

libqb0: 1.0-1

pve-cluster: 4.0-31

qemu-server: 4.0-52

pve-firmware: 1.1-7

libpve-common-perl: 4.0-46

libpve-access-control: 4.0-11

libpve-storage-perl: 4.0-40

pve-libspice-server1: 0.12.5-2

vncterm: 1.2-1

pve-qemu-kvm: 2.5-4

pve-container: 1.0-41

pve-firewall: 2.0-16

pve-ha-manager: 1.0-21

ksm-control-daemon: 1.2-1

glusterfs-client: 3.5.2-2+deb8u1

lxc-pve: 1.1.5-6

lxcfs: 0.13-pve3

cgmanager: 0.39-pve1

criu: 1.6.0-1

zfsutils: 0.6.5-pve7~jessie

dietmar · Feb 14, 2016

What is the content of /var/lib/pve-manager/apl-info/download.proxmox.com ?

MikeP · Feb 14, 2016

Both download.proxmox.com releases.turnkeylinux.org in that directory contain all sorts of stuff, see below...

Still nothing listed...

Package: pve-web-news

Description: News displayed on the admin interface

<b>Welcome</b> to the Proxmox Virtual Environment!<br><br>

For more information please visit our homepage at

<a href='http://www.proxmox.com' target='_blank'>www.proxmox.com</a>

Package: archlinux-base

Version: 2015-24-29-1

Type: lxc

OS: archlinux

Section: system

Maintainer: Proxmox Support Team <support@proxmox.com>

Architecture: x86_64

Location: system/archlinux-base_2015-24-29-1_x86_64.tar.gz

md5sum: 057e8569507f79db2e2a33a2ebc56c67

Infopage: https://www.archlinux.org

Description: ArchLinux base image.

Package: centos-6-default

Version: 20160205

Type: lxc

OS: centos

Section: system

Maintainer: Proxmox Support Team <support@proxmox.com>

Architecture: amd64

Location: system/centos-6-default_20160205_amd64.tar.xz

md5sum: f8f9acb42fe7fa8c37e36f35158e7f2f

Infopage: https://linuxcontainers.org

Description: LXC default image for centos 6 (20160205)

Package: centos-7-default

Version: 20160205

Type: lxc

OS: centos

Section: system

Maintainer: Proxmox Support Team <support@proxmox.com>

Architecture: amd64

Location: system/centos-7-default_20160205_amd64.tar.xz

md5sum: 26b35982aeb79977b5a7c6d2ff2a0421

Infopage: https://linuxcontainers.org

Description: LXC default image for centos 7 (20160205)

Package: debian-6.0-standard

Version: 6.0-7

Type: lxc

OS: debian-6.0

Section: system

Maintainer: Proxmox Support Team <support@proxmox.com>

Architecture: amd64

Location: system/debian-6.0-standard_6.0-7_amd64.tar.gz

md5sum: ff39ec06497d7cc175e031d6ef76699e

Infopage: http://pve.proxmox.com/wiki/Debian_6.0_Standard

Description: Debian 6.0 (standard)

A small Debian Squeeze system including all standard packages.

Package: debian-7.0-standard

Version: 7.0-3

Type: lxc

OS: debian-7.0

Section: system

Maintainer: Proxmox Support Team <support@proxmox.com>

Architecture: amd64

Location: system/debian-7.0-standard_7.0-3_amd64.tar.gz

md5sum: 68f0509ce8bdb0400e1495ab2819e862

Infopage: http://pve.proxmox.com/wiki/Debian_7.0_Standard

Description: Debian 7.0 (standard)

A small Debian Wheezy system including all standard packages.

Package: debian-8.0-standard

Version: 8.0-1

Type: lxc

OS: debian-8.0

Section: system

Maintainer: Proxmox Support Team <support@proxmox.com>

Architecture: amd64

Location: system/debian-8.0-standard_8.0-1_amd64.tar.gz

md5sum: 9942d8a3f8fc96a47e7545d63d09ccb7

Infopage: http://pve.proxmox.com/wiki/Debian_8.0_Standard

Description: Debian 8.0 (standard)

A small Debian Jessie system including all standard packages.

Package: ubuntu-12.04-standard

Version: 12.04-1

Type: lxc

OS: ubuntu-12.04

Section: system

Maintainer: Proxmox Support Team <support@proxmox.com>

Architecture: amd64

Location: system/ubuntu-12.04-standard_12.04-1_amd64.tar.gz

md5sum: f93f1f090aebd558ed8769c823896caa

Infopage: http://pve.proxmox.com/wiki/Ubuntu_Precise_Standard

Description: Ubuntu Precise (standard)

A small Ubuntu Precise system including all standard packages.

Package: ubuntu-14.04-standard

Version: 14.04-1

Type: lxc

OS: ubuntu-14.04

Section: system

Maintainer: Proxmox Support Team <support@proxmox.com>

Architecture: amd64

Location: system/ubuntu-14.04-standard_14.04-1_amd64.tar.gz

md5sum: 153da63c710f435973a06ff28233e4e4

Infopage: http://pve.proxmox.com/wiki/Ubuntu_Trusty_Standard

Description: Ubuntu Trusty (standard)

A small Ubuntu Trusty system including all standard packages.

Package: ubuntu-15.04-standard

Version: 15.04-1

Type: lxc

OS: ubuntu-15.04

Section: system

Maintainer: Proxmox Support Team <support@proxmox.com>

Architecture: amd64

Location: system/ubuntu-15.04-standard_15.04-1_amd64.tar.gz

md5sum: f6ebbb378f32d5c3426f1a404e533945

Infopage: http://pve.proxmox.com/wiki/Ubuntu_Vivid_Standard

Description: Ubuntu Vivid (standard)

A small Ubuntu Vivid system including all standard packages.

Package: ubuntu-15.10-standard

Version: 15.10-1

Type: lxc

OS: ubuntu-15.10

Section: system

Maintainer: Proxmox Support Team <support@proxmox.com>

Architecture: amd64

Location: system/ubuntu-15.10-standard_15.10-1_amd64.tar.gz

md5sum: 56e60cdc5652afceb6b977dec7c0e51d

Infopage: http://pve.proxmox.com/wiki/Ubuntu_Wily_Standard

Description: Ubuntu Wily (standard)

A small Ubuntu Wily system including all standard packages.

dietmar · Feb 14, 2016

You need to download those template into a storage first (Storage content GUI).

tom · Feb 14, 2016

See also:

https://forum.proxmox.com/threads/a...-2-0rc1-including-turnkey-linux-library.8463/

MikeP · Feb 15, 2016

Thanks. After a little searching for the instructions, I found it...
For my (or anyone's) future reference

I had to add a "directory" mount to get "templates" as an option. I set it to "Shared". It is physically on pve2.

Datacenter - pve# - disk/pool - Content - Templates.
Then, I got it to download a template. Now it is on pve2, and I can create a CT on pve2, but it doesn't show up when I select pve1 as the host.
I found this thread. https://forum.proxmox.com/threads/c...orage-directory-is-shared-across-nodes.11826/

Then, I clicked on pve1/z3tredpooltemplates and downloaded an image. Now I see it only on pve1. I downloaded debian template to the same directory on pve2 and see it only on pve2. How do I see both on both?

Same thing for my SMB mounted directory. I can see the SMB on pve1 and pve2, But, I can't see the templates. I want to use the SMB disk for templates and backups. And, the z3tredpooltemplates for templates.

And, also, thanks for the integration with Turnkey. I love Turnkey for my SOHO builds. Now, with Turnkey containers, I can do more on one box.

Naamo · Jun 17, 2020

Its work's ! thank's a lot !

Search

Search

No Container Templates on 4.1

MikeP

Active Member

dietmar

Proxmox Staff Member

MikeP

Active Member

dietmar

Proxmox Staff Member

tom

Proxmox Staff Member

MikeP

Active Member

Attachments

Naamo

New Member

We value your privacy