Hi,
I have a NetXen NX3031 pci-e ethernet nic. Proxmox can recognize it properly, but with a warning:
Unfortunately, none of my VMs can identify the card once it is passed through. The NIC was checked and confirmed to work (at least in Fedora 37 Workstation).
Has anyone had such issues with this or similar cards? Any thoughts on how to solve the problem are welcomed! The
I have a NetXen NX3031 pci-e ethernet nic. Proxmox can recognize it properly, but with a warning:
Code:
lspci -v
01:00.0 Ethernet controller: NetXen Incorporated NX3031 Multifunction 1/10-Gigabit Server Adapter (rev ff) (prog-if ff)
!!! Unknown header type 7f
Kernel driver in use: vfio-pci
Kernel modules: netxen_nicUnfortunately, none of my VMs can identify the card once it is passed through. The NIC was checked and confirmed to work (at least in Fedora 37 Workstation).
Has anyone had such issues with this or similar cards? Any thoughts on how to solve the problem are welcomed! The
Proxmox version is 7.3-6 with Kernel: Linux 5.15.85-1-pve. Corresponding interfaces do not appear in the proxmox dashboard (Network section of the node)
Last edited: