network with 2 external IPs and NAT

weazy

New Member
Aug 13, 2020
3
0
1
25
### ip's have been changed ##

Not necessarily a Proxmox problem, but I hope someone can help me (sorry for my bad englisch)


My problem is that my ports released in NAT are also released on the 2nd IP

Example 49.9.9.134:80 <- (NAT) 10.10.10.11:80 can also be reached on the 2nd ip 49.9.9.88:80

I want dedicated use the second ip for a VM


My Network interfaces:

source /etc/network/interfaces.d/*

auto lo
iface lo inet loopback
iface lo inet6 loopback

auto enp35s0
iface enp35s0 inet static
address 49.9.9.134/27
gateway 49.9.9.129
pointopoint 49.9.9.129
up route add -net 49.9.9.128 netmask 255.255.255.224 gw 49.9.9.129 dev enp35s0

iface enp35s0 inet6 static
address d201:4f8:240:91c9::2
netmask 128
gateway fe80::1

####Physical END


auto vmbr0
iface vmbr0 inet static
address 49.9.9.134/32
bridge-ports none
bridge-stp off
bridge-fd 0
bridge_maxwait 0
#pre-up brctl addbr vmbr0
#weitere IPS mit up ip... eintragen
up ip route add 49.9.9.88/32 dev vmbr0



iface vmbr0 inet6 static
address d201:4f8:240:91c9::1
netmask 64
up ip -6 route add d201:4f8:240:91c9::/64 dev vmbr0
#weitere IPv6 netze hier anlegen


auto vmbr1
iface vmbr1 inet static
address 10.10.10.1/24
bridge-ports none
bridge-stp off
bridge-fd 0
post-up iptables -t nat -A POSTROUTING -s '10.10.10.0/24' -o enp35s0 -j MASQUERADE
post-down iptables -t nat -D POSTROUTING -s '10.10.10.0/24' -o enp35s0 -j MASQUERADE


# Teamspeak 9987:10.10.10.232:9987
post-up iptables -t nat -A PREROUTING -i enp35s0 -p udp --dport 9987 -j DNAT --to 10.10.10.232:9987
post-down iptables -t nat -D PREROUTING -i enp35s0 -p udp --dport 9987 -j DNAT --to 10.10.10.232:9987

# Teamspeak 30033:10.10.10.232:30033 filetransfer
post-up iptables -t nat -A PREROUTING -i enp35s0 -p tcp --dport 30033 -j DNAT --to 10.10.10.232:30033
post-down iptables -t nat -D PREROUTING -i enp35s0 -p tcp --dport 30033 -j DNAT --to 10.10.10.232:30033

# Teamspeak 10011:10.10.10.232:10011 serverquery
post-up iptables -t nat -A PREROUTING -i enp35s0 -p tcp --dport 10011 -j DNAT --to 10.10.10.232:10011
post-down iptables -t nat -D PREROUTING -i enp35s0 -p tcp --dport 10011 -j DNAT --to 10.10.10.232:10011

# Teamspeak 2010:10.10.10.232:2010 weblist
post-up iptables -t nat -A PREROUTING -i enp35s0 -p udp --dport 2010 -j DNAT --to 10.10.10.232:2010
post-down iptables -t nat -D PREROUTING -i enp35s0 -p udp --dport 2010 -j DNAT --to 10.10.10.232:2010


# HTTP 80:10.10.10.30:80
post-up iptables -t nat -A PREROUTING -i enp35s0 -p tcp --dport 80 -j DNAT --to 10.10.10.30:80
post-down iptables -t nat -D PREROUTING -i enp35s0 -p tcp --dport 80 -j DNAT --to 10.10.10.30:80


# HTTPS 443:10.10.10.30:443
post-up iptables -t nat -A PREROUTING -i enp35s0 -p tcp --dport 443 -j DNAT --to 10.10.10.30:443
post-down iptables -t nat -D PREROUTING -i enp35s0 -p tcp --dport 443 -j DNAT --to 10.10.10.30:443




####################### not in use

auto vmbr100
iface vmbr100 inet static
address 192.168.1.0/24
bridge-ports none






#####End



############################################################
# Functions previously found in netbase
#

# Uncomment the next two lines to enable Spoof protection (reverse-path filter)
# Turn on Source Address Verification in all interfaces to
# prevent some spoofing attacks
#net.ipv4.conf.default.rp_filter=1
#net.ipv4.conf.all.rp_filter=1

# Uncomment the next line to enable TCP/IP SYN cookies
# See http://lwn.net/Articles/277146/
# Note: This may impact IPv6 TCP sessions too
#net.ipv4.tcp_syncookies=1

# Uncomment the next line to enable packet forwarding for IPv4
net.ipv4.ip_forward=1

# Uncomment the next line to enable packet forwarding for IPv6
# Enabling this option disables Stateless Address Autoconfiguration
# based on Router Advertisements for this host
net.ipv6.conf.all.forwarding=1
 
Hello thanks for the answer.

i have try it but it not work for me:

(it important that use a port)

i have try it so

49.9.9.134 is external and 10.10.10.10 is local

post-up iptables -t nat -A PREROUTING -d 49.9.9.134 -p tcp --dport 8030 -j DNAT --to-destination 10.10.10.10:8030
post-down iptables -t nat -D PREROUTING -d 49.9.9.134 -p tcp --dport 8030 -j DNAT --to-destination 10.10.10.10:8030
 

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!