Network trouble

[Dimon4ik]

Hi, everybody. I have configured a cluster of 3 nodes, each node has two subnets

1) 10.98.103.0 - for cluster operation and management
2) 10.98.40.0 - for VM

There is a need to connect the NAS over ISCSI to my cluster, the NAS is also on the 192.168.1.0 network and the cluster cannot access it. The problem in the internal routing proxmox? And how can I solve it?
Thanks.

 

[udo]

Hi,
simply add an IP on the bridge for vm-traffic (vmbr0) in the 192.168.1.0/24 net.

Udo

 

[Dimon4ik]

Hi,
simply add an IP on the bridge for vm-traffic (vmbr0) in the 192.168.1.0/24 net.
Udo

Did as you said, left all the same, hosts from subnet 10.98.40.0 are unavailable

 

[Dark26]

You have to put an address like 192.168.1.x on the interface not 10.98.x.x.

 

[Dimon4ik]

You have to put an address like 192.168.1.x on the interface not 10.98.x.x.

This is a real setting, changed the settings to understand the situation

10.98.103.х - manage interface
10.98.40.x - interface for VM

 

[Dark26]

if the nas is on 192.168.1.x then you need a gateway/ route to access .

can you tell the result of the route command ?

 

[Dimon4ik]

if the nas is on 192.168.1.x then you need a gateway/ route to access .

can you tell the result of the route command ?

NAS located in 10.98.40.x subnet. When I try to connect the NAS to the cluster, an error occurs. Traceroute command stops on interface ip address vmbr1

 

[Belokan]

What are the netmasks on NAS & bridge ?