Kein Start von Corosync

Commander442

New Member
Aug 6, 2019
3
0
1
29
Hallo bin neu im Forum und hoffe mir kann hier geholfen werden.
Bastel gerade am Proxmox rum und möchte gern das ganze Clustern. Aber der service.corosync startet nicht

Code:
systemctl status corosync.service
● corosync.service - Corosync Cluster Engine
   Loaded: loaded (/lib/systemd/system/corosync.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Tue 2019-08-06 21:20:23 CEST; 8s ago
     Docs: man:corosync
           man:corosync.conf
           man:corosync_overview
  Process: 24768 ExecStart=/usr/sbin/corosync -f $COROSYNC_OPTIONS (code=exited, status=8)
 Main PID: 24768 (code=exited, status=8)
      CPU: 11ms

Aug 06 21:20:23 pve systemd[1]: Starting Corosync Cluster Engine...
Aug 06 21:20:23 pve corosync[24768]: parser error: Missing closing brace
Aug 06 21:20:23 pve systemd[1]: corosync.service: Main process exited, code=exited, status=8/n/a
Aug 06 21:20:23 pve systemd[1]: Failed to start Corosync Cluster Engine.
Aug 06 21:20:23 pve systemd[1]: corosync.service: Unit entered failed state.
Aug 06 21:20:23 pve systemd[1]: corosync.service: Failed with result 'exit-code'.

Hat jemand eine Lösung für mich bin gerade etwas am Verzweifeln.


Mit freundlichen Grüßen

der Commander
 
bitte poste den output von "pveversion -v" und den inhalt von /etc/pve/corosync.conf und /etc/corosync/corosync.conf
 
So Hallo jetzt melde ich mich nochmal mit etwas mehr Zeit. Jetzt zu meiner eigentlichen Idee wo ich hilfe bräuchte. da ich noch sehr neu bin in Proxmox erstmal die Frage ist das möglich.

Ich würde gern ein Cluster machen bzw würde gern 2 Server über ein Webinterface laufen lassen und steuern.
Diese Server befinden sich in verschiedenen Netzen.
Ist dies möglich? (Daher meine Idee wegen dem Post hier Corosync startet nicht dies darüber laufen zu lassen. Nur wie zu Lesen gab es da ein zwei Probleme.)

Und wenn dies möglich ist hätte jemand für mich eine Anleitung das ganze umzusetzen. Am besten mit Befehlen und am liebsten noch auf Deutsch (ich kann Englisch es geht mir aber mehr um das fehlerfreie verstehen).

Noch dazu der eine Server ist komplett blank nur neu aufgesetzt und auf Proxmox 6 und Corosync ist geupdatet vorher.
Auf dem zweiten Server befinden sich bereits VM's. Ebenfalls Proxmox 6 Corosync geupdatet.

für jede Idee bin ich offen.
 
nein die server müssen im selben netz sein. oder in eine V-Switch
Sonst funktioniert das nicht und crono ist defekt
 
All nodes must be able to connect to each other via UDP ports 5404 and 5405 for corosync to work. (https://pve.proxmox.com/wiki/Cluster_Manager#_requirements)
This needs a reliable network with latencies under 2 milliseconds (LAN performance) to work properly. The network should not be used heavily by other members, ideally corosync runs on its own network. Do not use a shared network for corosync and storage (except as a potential low-priority fallback in a redundant configuration). (https://pve.proxmox.com/wiki/Cluster_Manager#_cluster_network)
 

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!