[SOLVED] I can acess Web GUI
- Thread starter Guilherme Vianna
- Start date
Did you try this link https://192.168.0.50:8006?
Ethernet cable plugged in the correct port and is working?
You are trying to access it from a machine inside the 192.168.0.0/24 subnet?
Ethernet cable plugged in the correct port and is working?
You are trying to access it from a machine inside the 192.168.0.0/24 subnet?
Hi Guilherme,
Welcome to the forums!
Try adding the port: 192.168.0.50:8006
Welcome to the forums!
You must mean you can't access ;-)
Try adding the port: 192.168.0.50:8006
Bro. Was this problem before. I don't know what to do, I've tried everything.
Attachments
Can you login to the Proxmox host console, using a physical keyboard and display? Please show the output of the command
ip a.
Hey, how do you know Proxmox is actually at 192.168.0.50?
Does it react to ping?
And of course, the things @leesteken & @Folke Gleumes mentioned; Proxmox shows the web access address above the login prompt.
Does it react to ping?
And of course, the things @leesteken & @Folke Gleumes mentioned; Proxmox shows the web access address above the login prompt.
Attachments
Why are you using 192.168.0.34 as a gateway for Proxmox, while other systems in your local network use 192.168.0.1 as the default gateway?
Are you able to ping .50 from windows?
Are you able to ping .58 from PVE?
What is the output of this command when run from PVE console: curl -sk https://192.168.0.50:8006
Are there any firewalls or routers between them?
Connect windows with PVE via direct network cable - does this change the outcome?
Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
I using a TrueNAS to filter some data. Anyway I change to 192.168.0.1 and same thing. No GUI in the browser.
There have been issues with some routers that block traffic from static IP addresses in the DHCP range. Could that be a problem here?
i can ping .50 from Windows
i can`t ping .58 from proxmox
not output
one switch, no anormal or complex network
only normal windows firewall in the .58 machina
all the machines is connected with cable into 8 ports switch
probaly not. Exist 3 servers in the network. two 2008 windows server and TrueNAS All with static ip with 0 problems
did you change and restart networking / reboot ?
What is the current output of "ip route" on PVE?
You just said that you used TrueNAS to filter at least some traffic.
Please take the physical cable and connect PVE and a windows box directly.
Also, what is the output from Windows of : arp -a|findstr 192.168.0
Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
Look photos. I change ip of PROXMOX to DHCP and got 192.168.0.47 (please consider change, no confusion)
Windows connected wired cable direct in the proxmox
Windows connected to the wired network by switch
Note: i can ping 192.168.0.47 using my Win 11 PC. But i can`t acess WebGUI