[FRENCH] proxmox et le multipath

C

cleloup

New Member
Jan 19, 2026
3
0
1
Bonjour,

déjà je le dis, je suis nul en Anglais.
J'ai configuré le multipath avec un baie san dell scv 2020. J'e n'ai pas mal galérer.
Par contre j'ai tous mes patch qui s''affiche dans mon web gui. est ce que c'est normal ?

 
Hi croit,

I have several portals.
I just need to connect one.
And then, once the wiki procedure is complete, do I deactivate it?

thanks for your help
 
Yes, as stated here https://pve.proxmox.com/wiki/Multipath#iSCSI just one of the available portals needs to be used.
Then, configure your iSCSI storage on the GUI ("Datacenter->Storage->Add->iSCSI"). In the "Add: iSCSI" dialog, enter the IP of an arbitrary portal. Usually, the iSCSI target advertises all available portals back to the iSCSI initiator, and in the default configuration, Proxmox VE will try to connect to all advertised portals.
Click to expand...

What do you want to deactivate?
 
I think Huawei (is it a Huawei storage server? :P) announces separate portals for each controller, with a different iqn for the target.. You might want to switch something like the path_grouping_policy or some other options in multipath.conf. I don't have the dorado at hand, but will ask the settings to avoid that behavior, that is a bit annoying..
 
You must log in or register to reply here.
Top Bottom
Back