could not activate storage 'XXXX', zfs error: cannot import 'XXXXX': no such pool available

K

Kappelui

New Member
Feb 23, 2024
3
0
1
Guten Abend,

Ich habe eben einige Updates in meinem Node aufgespielt welche mir unter "Updates" angezeigt wurde. VE ist Version 8.1.4

Seither werden meine zfs-pools nicht mehr erkannt.

Im Rechenzentrum unter "Storage" werden sie noch angezeigt aber im Knoten nicht
Screenshot 2024-02-23 175807.png
Screenshot 2024-02-23 180457.pngDie storage.cfg sieht so aus

Code: 
dir: local
        path /var/lib/vz
        content backup,vztmpl,iso

zfspool: local-zfs
        pool rpool/data
        content images,rootdir
        sparse 1

zfspool: HDD-4TB
        pool HDD-4TB
        content images,rootdir
        mountpoint /HDD-4TB
        nodes HomeLab

zfspool: SSD-2TB
        pool SSD-2TB
        content rootdir,images
        mountpoint /SSD-2TB
        nodes HomeLab

Local-zfs wird erkannt 4TB sowie 2TB pool nicht

der 4TB pool besteht aus einem Raid-1 aus 2x 4TB Platten


Lief alles vor dem Update ohne Probleme



Kann mir bitte jemand helfen :)
 
Last edited:
Hello

zpool import -a. don´t work

but what work is to downgrade from Kernel 6.5.13-1 to 6.5.11-8 but this is not a solution of my problem. Is whit Kernel 6.5.13-1 any issues known?
 
Kappelui said:
. Is whit Kernel 6.5.13-1 any issues known?
Click to expand...
bekannt ist nichts, kann man was im journal sehen ? (journalctl von je einem boot wo es funktioniert und wo es nicht funktioniert wären hilfreich)
 
Ich habe mal ein paar verdächtige Passagen rausgesucht. Mir fällt auf das es beim Bootvorgang mit 6.5.11-8 ebenfalls eine Fehlermeldung gibt aber der Pool trotzdem erkannt wird.

Ich kann auch nochmal einen aktuellen reboot machen und das komplette Log hier hochladen wenn es hilft.


6.5.13-1
Code: 
Feb 23 18:52:35 HomeLab systemd[1]: Starting zfs-import-cache.service - Import ZFS pools by cache file...
Feb 23 18:52:35 HomeLab systemd[1]: zfs-import-scan.service - Import ZFS pools by device scanning was skipped because of an unmet condition check (ConditionFileNotEmpty=!/etc/zfs/zpool.cache).
Feb 23 18:52:35 HomeLab systemd[1]: Starting zfs-import@HDD\x2d4TB.service - Import ZFS pool HDD\x2d4TB...
Feb 23 18:52:35 HomeLab systemd[1]: Starting zfs-import@SSD\x2d2TB.service - Import ZFS pool SSD\x2d2TB...
Feb 23 18:52:35 HomeLab systemd[1]: Finished ifupdown2-pre.service - Helper to synchronize boot up for ifupdown.
Feb 23 18:52:35 HomeLab zpool[822]: cannot import 'SSD-2TB': no such pool available
Feb 23 18:52:35 HomeLab zpool[821]: cannot import 'HDD-4TB': no such pool available
Feb 23 18:52:36 HomeLab systemd[1]: zfs-import@HDD\x2d4TB.service: Main process exited, code=exited, status=1/FAILURE
Feb 23 18:52:36 HomeLab systemd[1]: zfs-import@HDD\x2d4TB.service: Failed with result 'exit-code'.
Feb 23 18:52:36 HomeLab systemd[1]: Failed to start zfs-import@HDD\x2d4TB.service - Import ZFS pool HDD\x2d4TB.
Feb 23 18:52:36 HomeLab systemd[1]: zfs-import@SSD\x2d2TB.service: Main process exited, code=exited, status=1/FAILURE
Feb 23 18:52:36 HomeLab systemd[1]: zfs-import@SSD\x2d2TB.service: Failed with result 'exit-code'.
Feb 23 18:52:36 HomeLab systemd[1]: Failed to start zfs-import@SSD\x2d2TB.service - Import ZFS pool SSD\x2d2TB.

Hier ist mir noch was aufgefallen. Kernel 6.5.13-1 werden die SATA Schnittstellen wohl nicht erkannt

Code: 
Feb 23 19:25:00 HomeLab kernel: ata8: SATA link down (SStatus 4 SControl 300)
Feb 23 19:25:00 HomeLab kernel: ata6: SATA link down (SStatus 4 SControl 300)
Feb 23 19:25:00 HomeLab kernel: ata5: SATA link down (SStatus 4 SControl 300)
Feb 23 19:25:00 HomeLab kernel: ata7: SATA link down (SStatus 4 SControl 300)

In der 6.5.11-8 werden sie erkannt.
Code: 
Feb 26 16:51:12 HomeLab kernel: ata8: SATA link down (SStatus 0 SControl 300)
Feb 26 16:51:12 HomeLab kernel: ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Feb 26 16:51:12 HomeLab kernel: ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Feb 26 16:51:12 HomeLab kernel: ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Feb 26 16:51:12 HomeLab kernel: ata6.00: ATA-10: WDC WD40EFZX-68AWUN0, 81.00B81, max UDMA/133
Feb 26 16:51:12 HomeLab kernel: ata7.00: ATA-10: WDC WD40EFRX-68N32N0, 82.00A82, max UDMA/133
Feb 26 16:51:12 HomeLab kernel: ata6.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32)
Feb 26 16:51:12 HomeLab kernel: ata7.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
Feb 26 16:51:12 HomeLab kernel: ata6.00: configured for UDMA/133
Feb 26 16:51:12 HomeLab kernel: ata7.00: configured for UDMA/133
Feb 26 16:51:12 HomeLab kernel: ata5.00: supports DRM functions and may not be fully accessible
Feb 26 16:51:12 HomeLab kernel: ata5.00: ATA-11: Samsung SSD 870 EVO 2TB, SVT03B6Q, max UDMA/133
Feb 26 16:51:12 HomeLab kernel: ata5.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32), AA
Feb 26 16:51:12 HomeLab kernel: ata5.00: Features: Trust Dev-Sleep NCQ-sndrcv
Feb 26 16:51:12 HomeLab kernel: ata5.00: supports DRM functions and may not be fully accessible
Feb 26 16:51:12 HomeLab kernel: ata5.00: configured for UDMA/133
Feb 26 16:51:12 HomeLab kernel: scsi 4:0:0:0: Direct-Access     ATA      Samsung SSD 870  3B6Q PQ: 0 ANSI: 5
Feb 26 16:51:12 HomeLab kernel: sd 4:0:0:0: Attached scsi generic sg0 type 0
Feb 26 16:51:12 HomeLab kernel: ata5.00: Enabling discard_zeroes_data
Feb 26 16:51:12 HomeLab kernel: sd 4:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
Feb 26 16:51:12 HomeLab kernel: sd 4:0:0:0: [sda] Write Protect is off
Feb 26 16:51:12 HomeLab kernel: sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
Feb 26 16:51:12 HomeLab kernel: sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 26 16:51:12 HomeLab kernel: sd 4:0:0:0: [sda] Preferred minimum I/O size 512 bytes
Feb 26 16:51:12 HomeLab kernel: ata5.00: Enabling discard_zeroes_data
Feb 26 16:51:12 HomeLab kernel: scsi 5:0:0:0: Direct-Access     ATA      WDC WD40EFZX-68A 0B81 PQ: 0 ANSI: 5
Feb 26 16:51:12 HomeLab kernel: sd 5:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
Feb 26 16:51:12 HomeLab kernel: sd 5:0:0:0: [sdb] 4096-byte physical blocks
Feb 26 16:51:12 HomeLab kernel: sd 5:0:0:0: [sdb] Write Protect is off
Feb 26 16:51:12 HomeLab kernel: sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Feb 26 16:51:12 HomeLab kernel: sd 5:0:0:0: Attached scsi generic sg1 type 0
Feb 26 16:51:12 HomeLab kernel: sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 26 16:51:12 HomeLab kernel: sd 5:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
Feb 26 16:51:12 HomeLab kernel: scsi 6:0:0:0: Direct-Access     ATA      WDC WD40EFRX-68N 0A82 PQ: 0 ANSI: 5
Feb 26 16:51:12 HomeLab kernel: sd 6:0:0:0: Attached scsi generic sg2 type 0
Feb 26 16:51:12 HomeLab kernel: sd 6:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
Feb 26 16:51:12 HomeLab kernel: sd 6:0:0:0: [sdc] 4096-byte physical blocks
Feb 26 16:51:12 HomeLab kernel: sd 6:0:0:0: [sdc] Write Protect is off
Feb 26 16:51:12 HomeLab kernel: sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Feb 26 16:51:12 HomeLab kernel: sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 26 16:51:12 HomeLab kernel: sd 6:0:0:0: [sdc] Preferred minimum I/O size 4096 bytes
Feb 26 16:51:12 HomeLab kernel:  sda: sda1 sda9
Feb 26 16:51:12 HomeLab kernel: sd 4:0:0:0: [sda] supports TCG Opal
Feb 26 16:51:12 HomeLab kernel: sd 4:0:0:0: [sda] Attached SCSI disk
Feb 26 16:51:12 HomeLab kernel:  sdb: sdb1 sdb9
Feb 26 16:51:12 HomeLab kernel: sd 5:0:0:0: [sdb] Attached SCSI disk
Feb 26 16:51:12 HomeLab kernel:  sdc: sdc1 sdc9
Feb 26 16:51:12 HomeLab kernel: sd 6:0:0:0: [sdc] Attached SCSI disk

6.5.11-8
Code: 
Feb 23 18:55:00 HomeLab systemd[1]: Starting zfs-import-cache.service - Import ZFS pools by cache file...
Feb 23 18:55:00 HomeLab systemd[1]: zfs-import-scan.service - Import ZFS pools by device scanning was skipped because of an unmet condition check (ConditionFileNotEmpty=!/etc/zfs/zpool.cache).
Feb 23 18:55:00 HomeLab systemd[1]: Starting zfs-import@HDD\x2d4TB.service - Import ZFS pool HDD\x2d4TB...
Feb 23 18:55:00 HomeLab systemd[1]: Starting zfs-import@SSD\x2d2TB.service - Import ZFS pool SSD\x2d2TB...
Feb 23 18:55:00 HomeLab kernel: input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
Feb 23 18:55:00 HomeLab kernel: input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
Feb 23 18:55:00 HomeLab kernel: input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
Feb 23 18:55:00 HomeLab kernel: input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
Feb 23 18:55:00 HomeLab kernel: input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
Feb 23 18:55:00 HomeLab kernel: input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
Feb 23 18:55:00 HomeLab kernel: input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
Feb 23 18:55:00 HomeLab kernel: input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
Feb 23 18:55:00 HomeLab kernel: input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
Feb 23 18:55:00 HomeLab systemd[1]: Reached target sound.target - Sound Card.
Feb 23 18:55:00 HomeLab zpool[898]: cannot import 'HDD-4TB': no such pool available
Feb 23 18:55:00 HomeLab systemd[1]: zfs-import@HDD\x2d4TB.service: Main process exited, code=exited, status=1/FAILURE
Feb 23 18:55:00 HomeLab systemd[1]: zfs-import@HDD\x2d4TB.service: Failed with result 'exit-code'.
Feb 23 18:55:00 HomeLab systemd[1]: Failed to start zfs-import@HDD\x2d4TB.service - Import ZFS pool HDD\x2d4TB.
Feb 23 18:55:02 HomeLab systemd[1]: Finished zfs-import-cache.service - Import ZFS pools by cache file.
Feb 23 18:55:02 HomeLab kernel:  zd0: p1 p2 p3 p4 p5 p6 p7 p8
Feb 23 18:55:02 HomeLab kernel:  zd48: p1 p2 p3 p4 p5 p6 p7 p8
Feb 23 18:55:02 HomeLab systemd[1]: Finished zfs-import@SSD\x2d2TB.service - Import ZFS pool SSD\x2d2TB.
Feb 23 18:55:02 HomeLab systemd[1]: Reached target zfs-import.target - ZFS pool import target.
Feb 23 18:55:02 HomeLab systemd[1]: Starting zfs-mount.service - Mount ZFS filesystems...
Feb 23 18:55:02 HomeLab systemd[1]: Starting zfs-volume-wait.service - Wait for ZFS Volume (zvol) links in /dev...
Feb 23 18:55:02 HomeLab zvol_wait[1500]: Testing 4 zvol links
Feb 23 18:55:02 HomeLab zvol_wait[1500]: All zvol links are now present.
Feb 23 18:55:02 HomeLab systemd[1]: Finished zfs-volume-wait.service - Wait for ZFS Volume (zvol) links in /dev.
Feb 23 18:55:02 HomeLab systemd[1]: Reached target zfs-volumes.target - ZFS volumes are ready.
Feb 23 18:55:02 HomeLab systemd[1]: Finished zfs-mount.service - Mount ZFS filesystems.
Feb 23 18:55:02 HomeLab systemd[1]: Reached target local-fs.target - Local File Systems.
Feb 23 18:55:02 HomeLab systemd[1]: Starting apparmor.service - Load AppArmor profiles...
Feb 23 18:55:02 HomeLab systemd[1]: Starting console-setup.service - Set console font and keymap...


Pifouney said:
Dis you see your pool with zpool import -a?
Click to expand...
no i can't see my pools "no pools available to import"
 
Last edited:
das ungefilterte journal hilft wahrscheinlich mehr. potentiell ists ein problem mit dem hba/controller das man hier nicht sieht... was wird denn verwendet dafür? mainboard/hba/etc ?
 
You must log in or register to reply here.

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Quick Navigation

Home Get Subscription Wiki Downloads Proxmox Customer Portal About

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!
Community platform by XenForo® © 2010-2024 XenForo Ltd.
Top Bottom
Back