[SOLVED] Cluster over LACP bond

[xPakrikx]

Hi

We have 2 nodes Dell M630 each node have Qlogic 57810-k dual port connected to Dell MXL stack. These two ports are configured as bond0 (LACP bond). On top of the bond with vlan 20 is configured vmbr interface for corosync/cluster

But it looks like multicast traffic is not passing.

- IGMP is enabled on MXL switch and also igmp snooping querier on vlan.
- omping (response message never received)

Any help or idea ?
Thanks

 

[xPakrikx]

i try disable IGMP on switch and send multicast packets as broadcast and with omping no success but no problem with iperf and multicast route :/

 

[xPakrikx]

fixed, bad ip in corosync config and hosts file. My mistake