I'm trying to have that GPU working on a VM with proxmox 8.4. This is a PC with a mini ITX board. I have a ryzen 7 2700 (no iGPU), and the 1050ti card.
Then when
I've followed everything with no luck.
This is what I have on /etc/modprobe.d/vfio.conf:
Blacklisted nvidia drivers in /etc/modprobe.d/blacklist.conf:
And disabled framebuffer on grub:
IOMMU enabled on bios, checked that is working. VM with q35 type and UEFI bios.
I have video from the bios, and right after Proxmox boots it got freeze with booting text (expected as framebuffer was disabled).
Then when I start the VM with the PCI-E card passed, the display goes black. No error on the VM, but no display at all. I even have to cold boot the PC to have video back (if I do a soft reboot no image even from the bios).
I've seen that it could be related to the GPU not supporting FLR.
Any hints for this?
Then when
I've followed everything with no luck.
This is what I have on /etc/modprobe.d/vfio.conf:
Code:
options vfio-pci ids=10de:1c82,10de:0fb9 disable_vga=1Blacklisted nvidia drivers in /etc/modprobe.d/blacklist.conf:
Code:
blacklist nouveau
blacklist nvidia
blacklist nvidiafbAnd disabled framebuffer on grub:
Code:
GRUB_CMDLINE_LINUX_DEFAULT="nomodeset amd_iommu=on iommu=pt quiet nofb nomodeset video=vesafb:off,video=efifb:off initcall_blacklist=sysfb_init"IOMMU enabled on bios, checked that is working. VM with q35 type and UEFI bios.
I have video from the bios, and right after Proxmox boots it got freeze with booting text (expected as framebuffer was disabled).
Then when I start the VM with the PCI-E card passed, the display goes black. No error on the VM, but no display at all. I even have to cold boot the PC to have video back (if I do a soft reboot no image even from the bios).
I've seen that it could be related to the GPU not supporting FLR.
Any hints for this?