I installed a clean copy of 2.0 and 2.1 and they wont boot - They install all the way, but when rebooting, just a blank screen. Its a Rackable System with 3ware raid card and 4 drives, using raid 5
I can re install 1.7 and it works fine, reboots and runs without a problem, but if I put 2.0 or higher on it will not reboot
Any ideas
I can re install 1.7 and it works fine, reboots and runs without a problem, but if I put 2.0 or higher on it will not reboot
Any ideas