vmbr1

  1. A

    Multiple brigdes

    I'd set up two bond interfaces bond0 (2 nics) and bond1 (other 2 nics) to divide traffic from my VMs to different interfaces. I connected vmbr0 to bond0 (for management and some VMs), then created vmbr1 connected to bond1. If I test vmbr1 with a static IP address from network, it works fine, but...
  2. K

    Erstellen von vmbr1 -> Netzwerk/Internet down

    Hallo zusammen, ich bin Neuling in der Proxmox-Welt & möchte auf meinem Proxmox-Host pfsense installieren, so wie in dem unten verlinkten Tutorialvideo von "Raspberry Pi Cloud". Allerdings scheitert es bei mir schon beim ersten Schritt (Erstellen von vmbr1) - wenn ich das tue, ist mein...
  3. E

    Access UI of Turnkey File Server on vmbr1 from laptop

    Hello, I have one pve node in my new home server setup. It has /etc/network/interfaces as follows: auto lo iface lo inet loopback iface eno1 inet manual auto vmbr0 iface vmbr0 inet static address 10.0.0.204/24 gateway 10.0.0.1 bridge-ports eno1 bridge-stp off...
  4. P

    Local network and public for VM/CTS

    Hello, We have a Proxmox server setup in our datacenter with a local network configured for the host (Proxmox GUI) and we have a second VMBR setup named VMBR1 with a Linux BOND for failover to access our public IPS. Now I was wondering, how could we prevent that our CT/VMS can ping our local...
  5. M

    Can't ping devices from vmbr1

    Hello, I took some time to try to resolve this myself, but like many, I'm new to this and wanted to reach out for some help. I'm trying to mount NFS storage to Proxmox from TrueNAS, which is one of my VM's of course!, and I have TrueNAS on my vmbr1 interface, however, I can't get connectivity...
  6. L

    1 public IP, two bridges, port forwarding

    Hello Guys, currently running proxmox 7.2-3 on a dedicated server. I got only one public ip (eno1) and two bridges (vmbr0, vmbr1). The idea is to have some VM's over vmbr0 (more management like tooling) and some others over vmbr1. Does that even make sense to set it up that way? I tried to...
  7. R

    vmbr1 not activating USB network port after reboot

    Hi All. I've installed a UGREEN Ethernet Adapter and created a bridge (vmbr1). I've used it without an issue until I rebooted the host. It looks like the port is not activated after the reboot. I have to reconfigure the bridge to bring it back up. Is there something I can do to make these...
  8. I

    network interfaces dual port

    Hey Proxmox crew, i wanted to create two vmbr with an Ethernet port each. it somewhat works with the config that i have but i get failed to raise network interface on startup. here is my etc/network/interfaces file auto lo iface lo inet loopback iface enp4s0 inet manual auto vmbr0 iface...
  9. R

    proxmox 4 firewall problem internet access

    Hello everyone, I have a problem with the proxmox firewall. i have activated it on the proxmox host and on all containers. all works fine. one container have no public ip-adress and use the proxmox host for dns resolv (internet access) i create a vmbr adapter for this with 192.168..... network...
  10. R

    proxmox firewall problem container bridges

    Hello everyone, I have a problem with the proxmox firewall. i have activated it on the proxmox host and on all containers. all works fine. one container have no public ip-adress and use the proxmox host for dns resolv (internet access). if i activated the proxmox firewall on the container i...
  11. R

    proxmox firewall problem bridges

    Hello everyone, I have a problem with the proxmox firewall. i have activated it on the proxmox host and on all containers. all works fine. one container have no public ip-adress and use the proxmox host for dns resolv (internet access). if i activated the proxmox firewall on the container i...
  12. N

    Portweiterleitung ohne Neustart möglich ?

    Hallo, ich versuche seit geraumer Zeit, "Regeln"/Portweiterleitungen für die Bridges (vmbrXX) zu ändern, ohne direkt einen Neustart machen zu müssen.. Leider bisher vergebens. Habe auch in den anderen Foren nichts darüber gefunden... Leider immer mit einem Neustart verbunden. Gibt es eine...
  13. D

    No internet access with local IP and gateway

    Hello! First I want to say thank you for Proxmox! I have a "little" problem with internet access for my CT (LXC as I am running Proxmox 4.1) proxmox-ve: 4.1-34 (running kernel: 4.2.6-1-pve) pve-manager: 4.1-5 (running version: 4.1-5/f910ef5c) pve-kernel-4.2.6-1-pve: 4.2.6-34...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!