usb install

Hello all! I have read a lot of good stuff of proxmox and I am willing to give it a try. Hardware from hardkernal is perfect fit for the task. I am using there H2 bird with intel celeron cpu. Specs! Intel® Quad-Core Processor J4105( REV-B+(H2+) J4115 ) up to 2.5Ghz(Single Thread) or...

I am installing proxmox via USB key following the instructions at https://pve.proxmox.com/wiki/Install_from_USB_Stick/. The target devices were Dell r710 and Lenevo Thinkpad dd if=proxmox-ve_*.iso of=/dev/XYZ bs=1M After changing BIOS to boot from USB , the USB device is detected but install...

Hello Everyone, According to this older thread installing Proxmox on a USB flash drive was discouraged. Is that still the case with Proxmox 5.1? FreeNAS, for example, encourages installing onto a USB flash drive for their ZFS setup. That's why I was wondering if this has changed for the...

I'm having an issue trying to install both Proxmox 5.0 and 4.4 (testing 4.4 to see if it would work) using a USB drive. Using the dd command (dd if=proxmox... of=/dev/sdX) and I'm not having any luck. Select to boot from USB and I get a gray screen then it boots into the already installed OS on...

as the subj. says, is it possible to install Proxmox using ZFS raid-1 setup so it would use disk UUID rather than /sdX name? I am playing with different setup right now so I can reconfigure my current server with Proxmox and ZFS. all setups are using Proxmox ISO. it all looks good and all. but...

Hi zusammen, der Titel verrät es: Ich baue meinen ersten Homeserver zusammen, der vor allem als schneller Fileserver für die Foto- und Videobearbeitung und für eine Ubuntu und Windows VM mit entsprechenden Diensten (Plex, Nextcloud, Docker, Time Machine, etc.) dienen soll. Nun bin ich am...

I have an HP Proliant Gen7 Microserver with 8GB of RAM. I'm trying to install Proxmox from a 8GB USB 2.0 flash drive plugged into the internal USB port. The first time I tried to install Proxmox on it, the installer worked perfectly, but I changed my mind halfway through the installation...