Hardkernal H2 hardware - installation failed (usb)

[Mullcom]

Hello all!

I have read a lot of good stuff of proxmox and I am willing to give it a try. Hardware from hardkernal is perfect fit for the task.

I am using there H2 bird with intel celeron cpu.

Specs!
Intel® Quad-Core Processor J4105( REV-B+(H2+) J4115 ) up to 2.5Ghz(Single Thread) or 2.3Ghz(Multi Thread), 14nm with 4MiB Cache.
Dual-channel Memory DDR4 up to PC19200 (2400MT/s)
Total 32GiB RAM Space with two SO-DIMM slots.
4 x PCIe 2.0 for one M.2 NVMe storage.


Unfortunately I have problem to install it on this bord. I ran in to usb problem and all usb ports stopped working

 

[Mullcom]

Img of failing boot process

https://photos.app.goo.gl/HF9VnMnpcs8iGpzq9

https://photos.app.goo.gl/Z4fwYvJACWteYMew7

 

[Mullcom]

So far I can find is that it seams to be related to kernel or settings for boot up proxmox installation.

 

[Mullcom]

I finding a way to install older version of proxmox.

Link to instructions
https://forum.odroid.com/viewtopic.php?t=32943


Install this on a USB remove USB stick. This way it be easy if some day system broke down because main disk. I just replace USB stick with other one. ^_^

 

[Mullcom]

I finding a way to install older version of proxmox.

Link to instructions
https://forum.odroid.com/viewtopic.php?t=32943