scsi

Hello, my intention is to use a HP Ultrium tape in a Ubuntu 18.04 container, running on a Proxmox VE 6.0.4. During the boot process the system recognizes the scsi controller and the tape, here is the output of dmesg: [ 3.680072] scsi target5:0:3: asynchronous [ 3.680720] scsi 5:0:3:0...

All the physical disks are connected to a regular SATA port on the motherboard. Which option to is the best to choose when creating a new VM? Thank you,

Hallo zusammen, ich habe vor einen Windows Small Buissines Server zur virtuallisieren. Selbiger läuft auf einem echten Blech, als genauer ein Dell Server. Im Gerätemanager werden die Laufwerke so angezeigt: Meine Frage: Kann man den Server via...

I've created a new VM with SCSI controller drive as know SCSI is faster and better then IDE and SATA and selected the 2nd drive attached the server /dev/sdb instead of /dev/sda then loaded the server to install Windows server 2016 however on initial setup the windows can't locate and load the...

It should be possible to set a virtual disk drive to be backed by an SSD/Flash device. Virtio SCSI with SCSI, VirtIO and SATA drives should support this. Virtual box supports this since 2014, when can we expect this to happen in PVE? According to the upstream sources this should be possible...

Hello, first time here but looking for some help. I have the latest proxmox and I'm trying to add a RD1000 tape drive to it so that windows server 2016 can see it as a tape drive, not just a disk. I can get windows server 2016 to see it as a disk but that creates problems, it doesn't allow the...

Hello everyone, we are running a Proxmox 5.2-10 and are attempting to attach around 30 disks to a VM using SCSI device. According to the documentation, section hard disk, if you set VirtIO SCSI single as the default SCSI controller you get "no limit" since Qemu will create a new controller for...

Guten Tag Zusammen, ich habe vor kurzem die Einstellung bei allen meinen Windows Gästen geändert. Jetzt laufen alle mit SCSI Controller VirtIO SCSI und die Festplatten logischerweise an scsi0 mit der Option discard.Auf allen VMs sind die aktuellen Spice-Tools mit dem Qemu Agent installiert...

I've read several threads about different problems with Windows server migrations and am hoping to get pointers here. I'm pretty sure my problems are directly related to hard drive choices as I'm getting the bluescreen STOP 0X0000007B error mentioned in these forums as well as Microsoft Technet...

Hello! I just migrated from a Fedora/KVM setup to ProxMox and It was a painless setup. I did have tiny bit of trouble getting past "code 43" with NVidia. (On Fedora I COULD NOT use q35, in ProxMox, I HAD TO, and I also NEEDED the pci=1 line). But I got that resolved. The last piece of hardware I...

Hi All.. I have just started to use Proxmox in my lab, but I have an issue that I really hope someone can help me with.. For some testing of Windows Storage spaces I wanted to map 4 physical drives to one of my vm's, i have tried some diffrent methods of mapping the drives.. qm set 101...

In linux all /dev/disk/by-* show link to block device in /dev/sd?, example: # ls -la /dev/disk/by-path/ total 0 drwxr-xr-x 2 root root 200 Nov 2 12:58 . drwxr-xr-x 8 root root 160 Nov 1 21:21 .. lrwxrwxrwx 1 root root 9 Nov 2 12:59 pci-0000:05:00.0-fc-0x2100000e1ecd8890-lun-0 -> ../../sde...

Hi Guys, on my Proxmox 5 I have to create several Windows 7/10 Virtual Machines. My server has an hardware RAID Controller Card (1 GB RAM with battery) and 4 SATA Disks attached to it. I would create the VMs with the following parameters: -Hard Disk Bus/Device: SCSI -target storage: LVM-thin...

Hi, Im in a quest to have the VM (OpenMediaVault) as direct access to two dedicated disks as possible. I really want OMV to have S.M.A.R.T access to the disks but its not possilbe with the current setup. Maybe I can use smart if i passthrough the whole LUN divice as stated on ovirt. org? Adding...