#omv

Hey, I am really new to whole NAS thing, i started a few days, i just recently build a OMV NAS with 1tb HHD, and 16gb flash drive for boot. I installed ZFS on it. but now when installing the plugin backup. it giving me a 500 error. i think it cause it not compatibly with ZFS. is there any other...

Hi there ! Few months ago i've recycled my old computer into proxmox serveur with Open media vault vm my omv vm is installed on 1to ssd and there are 3x4to HDD for omv raid5 everything was fine, i've stored my important data into the omv raid but somedays after i've installed a windows os with...

Hey all, noob here. I got proxmox installed on an Intel NUC, having (only) 2 HDDs setup as ZFS RAID 1. This setup is only for my homelab for media server, home-assistant, etc. I would like to allocate a dedicated space to be used for both SMB/NFS shares so various Containers, such as Plex will...

I have OpenMediaVault running inside Proxmox, and did 4 HDD disks with passtrough to OMV. The disks are: 4x WD6003FFBX-68MU3N0 (WD Red Pro (2020) (256MB cache), 6TB) Specs: 4 cores (HOST) / 8GB / All the HDD's are in passtrough with QM set. Once I installed everything and installed the ZFS...

Hallo liebes Forum! ich habe mal eine kurze frage. Ich betreibe z.Z. einen Windows Server 2016 und 1 OpenmediaVault (OMV) NAS, welches für meine Medien-Dateien, Dokumenten und Downloads als Datengrab, sowie z.Z. auch als Teamspeak, Ark Survival Evolved- und Space Engineers-Dedicated Server...

Good evening, In Proxmox I have an OpenMediaVault VM with Virtio scsi driver (single). I have disk passthrough (sata hdd) just via adding "scsi1: ata-xxxxx" in my VM.conf. The disk was visible in OMV and I create filesystem and SMB shares in OMV. I didn't want to modify anything on the proxmox...

Hi Guys Sorry to bother you. I found a problem when I install OMV6 in PVE as VM. The installation guide stopped after DHCPv6 was completed and I never saw the Configure the network Page. What should I do next? Thanks a lot.

Hi, I am trying to run OMV on Proxmox on Raspberry pi 4, unfortunately the machine starts but shows "guest has not initialized the display (yet)", what can I do to make the machine start properly?